| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| When an SSL profile is configured on a virtual server on BIG-IP Virtual Edition (VE) without Intel QuickAssist Technology (QAT) or on BIG-IP hardware platforms with the database variable crypto.hwacceleration set to disabled, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/buddy: Prevent BUG_ON by validating rounded allocation
When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is
rounded up to the next power-of-two via roundup_pow_of_two().
Similarly, for non-contiguous allocations with large min_block_size,
the size is aligned up via round_up(). Both operations can produce a
rounded size that exceeds mm->size, which later triggers
BUG_ON(order > mm->max_order).
Example scenarios:
- 9G CONTIGUOUS allocation on 10G VRAM memory:
roundup_pow_of_two(9G) = 16G > 10G
- 9G allocation with 8G min_block_size on 10G VRAM memory:
round_up(9G, 8G) = 16G > 10G
Fix this by checking the rounded size against mm->size. For
non-contiguous or range allocations where size > mm->size is invalid,
return -EINVAL immediately. For contiguous allocations without range
restrictions, allow the request to fall through to the existing
__alloc_contig_try_harder() fallback.
This ensures invalid user input returns an error or uses the fallback
path instead of hitting BUG_ON.
v2: (Matt A)
- Add Fixes, Cc stable, and Closes tags for context |
| dnsmasqs extract_name() function can be abused to cause a heap buffer overflow, allowing an attacker to inject false DNS cache entries, which could result in DNS lookups to redirect to an attacker-controlled IP address, or to cause a DoS. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
| vLLM is an inference and serving engine for large language models (LLMs). From to before 0.20.0, the extract_hidden_states speculative decoding proposer in vLLM returns a tensor with an incorrect shape after the first decode step, causing a RuntimeError that crashes the EngineCore process. The crash is triggered when any request in the batch uses sampling penalty parameters (repetition_penalty, frequency_penalty, or presence_penalty). A single request with a penalty parameter (e.g., "repetition_penalty": 1.1) is sufficient to crash the server. This vulnerability is fixed in 0.20.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| Pillow is a Python imaging library. From version 11.2.1 to before version 12.2.0, passing nested lists as coordinates to APIs that accept coordinates such as ImagePath.Path, ImageDraw.ImageDraw.polygon and ImageDraw.ImageDraw.line could cause a heap buffer overflow, as nested lists were recursively unpacked beyond the allocated buffer. Coordinate lists are now validated to contain exactly two numeric coordinates. This issue has been patched in version 12.2.0. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| When the assert() function in the GNU C Library versions 2.13 to 2.40 fails, it does not allocate enough space for the assertion failure message string and size information, which may lead to a buffer overflow if the message string size aligns to page size. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add rough attr alloc_size check |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix Virtual Memory mapping boundaries calculation
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) |
| An integer overflow was found in the __vsyslog_internal function of the glibc library. This function is called by the syslog and vsyslog functions. This issue occurs when these functions are called with a very long message, leading to an incorrect calculation of the buffer size to store the message, resulting in undefined behavior. This issue affects glibc 2.37 and newer. |
| The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) |
| Delta Electronics AS320T has incorrect calculation of the buffer size on the stack in the GET/PUT request handler of the web service. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: account XFRMA_IF_ID in aevent size calculation
xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then
build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is
set.
xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states
with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0)
in xfrm_get_ae(), turning a malformed netlink interaction into a kernel
panic.
Account XFRMA_IF_ID in the size calculation unconditionally and replace
the BUG_ON with normal error unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: AV1: Fix tile info buffer size
Each tile info is composed of: row_sb, col_sb, start_pos
and end_pos (4 bytes each). So the total required memory
is AV1_MAX_TILES * 16 bytes.
Use the correct #define to allocate the buffer and avoid
writing tile info in non-allocated memory. |
