| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: update file PMD counter before folio_put()
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: Fix use-after-free during device removal
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: use RCU with deferred freeing for action lifecycle
When NEWTFILTER and DELFILTER are run concurrently it is possible to create a
race with an associated action.
Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER:
0: mutex_lock() <-- holds the idr lock
0: rcu_read_lock()
0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR)
0: mutex_unlock() <-- releases the idr lock
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index) <-- Action removed from IDR
1: mutex_unlock() <-- mutex released allowing us to delete the action
1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory
This patch fixes the race condition between NEWTFILTER and DELFILTER by
adding struct rcu_head to tc_action used in the deferral and introducing a
call_rcu() in the delete path to defer the final kfree().
Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
but also modernization/simplification to directly use kfree_rcu().
Let's illustrate the new restored code path:
0: rcu_read_lock()
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index)
1: mutex_unlock()
1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period
0: p = idr_find(idr, index)
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0
1: rcu_read_unlock() <-- release so freeing can run after grace period
After CPU1 calls idr_remove(), the object is no longer reachable through the IDR.
CPU0's subsequent idr_find() will return NULL, and even if it still held a
stale pointer, the immediate kfree() is now deferred until after the RCU grace
period, so no UAF can occur. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine
ksmbd_crypt_message() sets a NULL completion callback on AEAD requests
and does not handle the -EINPROGRESS return code from async hardware
crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns
-EINPROGRESS, ksmbd treats it as an error and immediately frees the
request while the hardware DMA operation is still in flight. The DMA
completion callback then dereferences freed memory, causing a NULL
pointer crash:
pc : qce_skcipher_done+0x24/0x174
lr : vchan_complete+0x230/0x27c
...
el1h_64_irq+0x68/0x6c
ksmbd_free_work_struct+0x20/0x118 [ksmbd]
ksmbd_exit_file_cache+0x694/0xa4c [ksmbd]
Use the standard crypto_wait_req() pattern with crypto_req_done() as
the completion callback, matching the approach used by the SMB client
in fs/smb/client/smb2ops.c. This properly handles both synchronous
engines (immediate return) and async engines (-EINPROGRESS followed
by callback notification). |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
During wait-requeue-pi (task A) and requeue-PI (task B) the following
race can happen:
Task A Task B
futex_wait_requeue_pi()
futex_setup_timer()
futex_do_wait()
futex_requeue()
CLASS(hb, hb1)(&key1);
CLASS(hb, hb2)(&key2);
*timeout*
futex_requeue_pi_wakeup_sync()
requeue_state = Q_REQUEUE_PI_IGNORE
*blocks on hb->lock*
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_IGNORE => -EAGAIN
double_unlock_hb(hb1, hb2)
*retry*
Task B acquires both hb locks and attempts to acquire the PI-lock of the
top most waiter (task B). Task A is leaving early due to a signal/
timeout and started removing itself from the queue. It updates its
requeue_state but can not remove it from the list because this requires
the hb lock which is owned by task B.
Usually task A is able to swoop the lock after task B unlocked it.
However if task B is of higher priority then task A may not be able to
wake up in time and acquire the lock before task B gets it again.
Especially on a UP system where A is never scheduled.
As a result task A blocks on the lock and task B busy loops, trying to
make progress but live locks the system instead. Tragic.
This can be fixed by removing the top most waiter from the list in this
case. This allows task B to grab the next top waiter (if any) in the
next iteration and make progress.
Remove the top most waiter if futex_requeue_pi_prepare() fails.
Let the waiter conditionally remove itself from the list in
handle_early_requeue_pi_wakeup(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free reuseport cBPF prog after RCU grace period.
Eulgyu Kim reported the splat below with a repro. [0]
The repro sets up a UDP reuseport group with a cBPF prog and
replaces it with a new one while another thread is sending
a UDP packet to the group.
The reuseport prog is freed by sk_reuseport_prog_free().
bpf_prog_put() is called for "e"BPF prog to destruct through
multiple stages while cBPF prog is freed immediately by
bpf_release_orig_filter() and bpf_prog_free().
If a reuseport prog is detached from the setsockopt() path
(reuseport_attach_prog() or reuseport_detach_prog()),
sk_reuseport_prog_free() is called without waiting for RCU
readers to complete, resulting in various bugs.
Let's defer freeing the reuseport cBPF prog after one RCU
grace period.
Note "e"BPF prog is safe as is unless the fast path starts
to touch fields destroyed in bpf_prog_put_deferred() and
__bpf_prog_put_noref().
[0]:
BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
Read of size 4 at addr ffffc9000051e004 by task slowme/10208
CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495
__udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723
__udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752
__udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6181 [inline]
__netif_receive_skb net/core/dev.c:6294 [inline]
process_backlog+0xaa4/0x1960 net/core/dev.c:6645
__napi_poll+0xae/0x340 net/core/dev.c:7709
napi_poll net/core/dev.c:7772 [inline]
net_rx_action+0x5d7/0xf50 net/core/dev.c:7929
handle_softirqs+0x22b/0x870 kernel/softirq.c:622
do_softirq+0x76/0xd0 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip_output+0x29f/0x450 net/ipv4/ip_output.c:438
ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508
udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195
udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
__sys_sendto+0x554/0x680 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x415a2d
Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d
RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003
RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010
R10: 0000000000000000 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Fix race between m2m job_abort and device_run
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition |
