| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). |
| The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Push kjump return address even for non-kjump kexec
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: igorplugusb: heed coherency rules
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: Skip governor when only one idle state is available
On certain platforms (PowerNV systems without a power-mgt DT node),
cpuidle may register only a single idle state. In cases where that
single state is a polling state (state 0), the ladder governor may
incorrectly treat state 1 as the first usable state and pass an
out-of-bounds index. This can lead to a NULL enter callback being
invoked, ultimately resulting in a system crash.
[ 13.342636] cpuidle-powernv : Only Snooze is available
[ 13.351854] Faulting instruction address: 0x00000000
[ 13.376489] NIP [0000000000000000] 0x0
[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668
Fix this by adding a bail-out in cpuidle_select() that returns state 0
directly when state_count <= 1, bypassing the governor and keeping the
tick running. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC has an out-of-bounds memory access vulnerability that could be triggered on the client side when sending data from the server, which could result in a Denial-of-Service condition. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC has an out-of-bounds memory access vulnerability that could be triggered on the server side when sending data from the client, which could result in a Denial-of-Service condition. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has an out-of-bounds memory access vulnerability in the device layout handler, represented by a binary data stream on client side, which can potentially result in code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Limit PTP to a single page
Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256
playback streams, but the additional pages are not used by the card
correctly. The CT20K2 hardware already has multiple VMEM_PTPAL
registers, but using them separately would require refactoring the
entire virtual memory allocation logic.
ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of
CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When
aggregate memory allocations exceed this limit, ct_vm_map() tries to
access beyond the allocated space and causes a page fault:
BUG: unable to handle page fault for address: ffffd4ae8a10a000
Oops: Oops: 0002 [#1] SMP PTI
RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi]
Call Trace:
atc_pcm_playback_prepare+0x225/0x3b0
ct_pcm_playback_prepare+0x38/0x60
snd_pcm_do_prepare+0x2f/0x50
snd_pcm_action_single+0x36/0x90
snd_pcm_action_nonatomic+0xbf/0xd0
snd_pcm_ioctl+0x28/0x40
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count
remain unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix side-effect bug in match_char() macro usage
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser
The Information Element (IE) parser rtw_get_ie() trusted the length
byte of each IE without validating that the IE body (len bytes after
the 2-byte header) fits inside the remaining frame buffer. A malformed
frame can advertise an IE length larger than the available data, causing
the parser to increment its pointer beyond the buffer end. This results
in out-of-bounds reads or, depending on the pattern, an infinite loop.
Fix by validating that (offset + 2 + len) does not exceed the limit
before accepting the IE or advancing to the next element.
This prevents OOB reads and ensures the parser terminates safely on
malformed frames. |
| Insufficient checks of the RMP on host buffer access in IOMMU may allow an attacker with privileges and a compromised hypervisor to trigger an out of bounds condition without RMP checks, resulting in a potential loss of confidential guest integrity. |
| Audition versions 25.3 and earlier are affected by an Access of Memory Location After End of Buffer vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to cause the application to crash or become unresponsive. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
