| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: zero per-item info buffer before handing it to visitors
rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a
caller-allocated on-stack u64 buffer to a per-connection visitor and
then copy the full item_len bytes back to user space via
rds_info_copy() regardless of how much of the buffer the visitor
actually wrote.
rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only
write a subset of their output struct when the underlying
rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl
and the two GIDs via explicit memsets). Several u32 fields
(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,
cache_allocs) and the 2-byte alignment hole between sl and
cache_allocs remain as whatever stack contents preceded the visitor
call and are then memcpy_to_user()'d out to user space.
struct rds_info_rdma_connection and struct rds6_info_rdma_connection
are the only rds_info_* structs in include/uapi/linux/rds.h that are
not marked __attribute__((packed)), so they have a real alignment
hole. The other info visitors (rds_conn_info_visitor,
rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of
their packed output struct today and are not known to be vulnerable,
but a future visitor that adds a conditional write-path would have
the same bug.
Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:
a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,
binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on
any netdev is sufficient), sendto()'s any peer on the same subnet
(fails cleanly but installs an rds_connection in the global hash in
RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,
RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26
bytes of stack garbage including kernel text/data pointers:
0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2
8..39 00 ... gids (memset-zeroed)
40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr)
48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max)
56..59 01 00 08 00 rdma_mr_size (garbage)
60..61 00 00 tos, sl
62..63 00 00 alignment padding
64..67 18 00 00 00 cache_allocs (garbage)
Fix by zeroing the per-item buffer in both rds_for_each_conn_info()
and rds_walk_conn_path_info() before invoking the visitor. This
covers the IPv4/IPv6 IB visitors and hardens all current and future
visitors against the same class of bug.
No functional change for visitors that fully populate their output.
Changes in v2:
- retarget at the net tree (subject prefix "[PATCH net v2]",
net/rds: prefix in the title)
- pick up Reviewed-by tags from Sharath Srinivasan and
Allison Henderson |
| In the Linux kernel, the following vulnerability has been resolved:
tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: zero the whole vnet header in tun_put_user()
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
Add validation to ensure MSI is configured before accessing cdx_irqs
array in vfio_cdx_set_msi_trigger(). Without this check, userspace
can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS
with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before
ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD.
The vfio_cdx_msi_enable() function allocates the cdx_irqs array and
sets config_msi to 1 only when called through the EVENTFD path. The
trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been
done, but there was no enforcement of this call ordering.
This matches the protection used in the PCI VFIO driver where
vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: mprls0025pa: fix spi_transfer struct initialisation
Make sure that the spi_transfer struct is zeroed out before use. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure
KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE
but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated
VRAM with stale data from prior use observable by compute kernels.
The GEM ioctl path already sets VRAM_CLEARED for all userspace
allocations via amdgpu_gem_create_ioctl() and
amdgpu_mode_dumb_create(). The KFD path was missing this flag,
allowing stale page table remnants to leak into user buffers.
This causes crashes in RCCL P2P transport where non-zero data in
ptrExchange/head/tail fields corrupts the protocol handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Fix PF driver crash with kexec kernel booting
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use kzalloc to zero-initialize security descriptor buffer
Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces
to le16") split struct smb_acl's __le32 num_aces field into __le16
num_aces and __le16 reserved. The reserved field corresponds to Sbz2
in the MS-DTYP ACL wire format, which must be zero [1].
When building an ACL descriptor in build_sec_desc(), we are using a
kmalloc()'ed descriptor buffer and writing the fields explicitly using
le16() writes now. This never writes to the 2 byte reserved field,
leaving it as uninitialized heap data.
When the reserved field happens to contain non-zero slab garbage,
Samba rejects the security descriptor with "ndr_pull_security_descriptor
failed: Range Error", causing chmod to fail with EINVAL.
Change kmalloc() to kzalloc() to ensure the entire buffer is
zero-initialized.
[1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 |
| An information disclosure vulnerability exists in AMD Platform Security Processor (PSP) chipset driver. The discretionary access control list (DACL) may allow low privileged users to open a handle and send requests to the driver resulting in a potential data leak from uninitialized physical pages. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime. |
