| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The default JVM can access files and directories under `/tmp/` including the `$TemporaryDirectory` of other users on the same cloud instance (`/tmp/UserTemporaryFiles/`). The `-init` file for the the JVM initialization exists in the vulnerable directory during the startup of the JVM. An attacker with access to the shared `/tmp/` space can preemptively create or replace `.jar` files or directories (via the `-init` file) that the victim JVM will resolve first in its classpath. By strategically placing a malicious version of a commonly used library (e.g., `commons-io`) in a location that is included in the classpath before the legitimate version, an attacker can cause the JVM to load the malicious class during startup, thereby executing the attacker's code. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
During wait-requeue-pi (task A) and requeue-PI (task B) the following
race can happen:
Task A Task B
futex_wait_requeue_pi()
futex_setup_timer()
futex_do_wait()
futex_requeue()
CLASS(hb, hb1)(&key1);
CLASS(hb, hb2)(&key2);
*timeout*
futex_requeue_pi_wakeup_sync()
requeue_state = Q_REQUEUE_PI_IGNORE
*blocks on hb->lock*
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_IGNORE => -EAGAIN
double_unlock_hb(hb1, hb2)
*retry*
Task B acquires both hb locks and attempts to acquire the PI-lock of the
top most waiter (task B). Task A is leaving early due to a signal/
timeout and started removing itself from the queue. It updates its
requeue_state but can not remove it from the list because this requires
the hb lock which is owned by task B.
Usually task A is able to swoop the lock after task B unlocked it.
However if task B is of higher priority then task A may not be able to
wake up in time and acquire the lock before task B gets it again.
Especially on a UP system where A is never scheduled.
As a result task A blocks on the lock and task B busy loops, trying to
make progress but live locks the system instead. Tragic.
This can be fixed by removing the top most waiter from the list in this
case. This allows task B to grab the next top waiter (if any) in the
next iteration and make progress.
Remove the top most waiter if futex_requeue_pi_prepare() fails.
Let the waiter conditionally remove itself from the list in
handle_early_requeue_pi_wakeup(). |
| Jenkins Script Security Plugin 1402.v94c9ce464861 and earlier does not reject Groovy AST transformation annotations carrying an extensions member, allowing attackers able to run sandboxed Groovy scripts to execute code outside the sandbox if a suitable script is present on the classpath of the component that evaluates the script. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to 0.6.5 and 0.5.15, several Net::IMAP commands accept a "raw data" argument that is sent verbatim after validation to prevent command injection. However, if a server does not support non-synchronizing literals, it may still be possible to inject arbitrary IMAP commands inside non-synchronizing literals. A server without support for non-synchronizing literals may interpret the "+}\r\n" as the end of a malformed command line and respond with a tagged BAD. In that case, the contents of the literal will be interpreted as one or more new pipelined commands, allowing a CRLF command injection attack to succeed. This affects criteria for #search and #uid_search; search_keys for #sort, #thread, #uid_sort, and #uid_thread; and attr for #fetch and #uid_fetch. This vulnerability is fixed in 0.6.5 and 0.5.15. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to 0.6.5 and 0.5.15, when Net::IMAP#id is called with a hash argument, although the ID field value strings are correctly quoted (escaping quoted specials), they were not validated to prohibit CRLF sequences. While Net::IMAP#enable does process its arguments for aliases, it does not validate them as valid atoms (or as a list of valid atoms). The #to_s value is sent verbatim. Arguments to either command could be used by an attacker to inject arbitrary IMAP commands. This vulnerability is fixed in 0.6.5 and 0.5.15. |
| guzzlehttp/psr7 is a PSR-7 HTTP message library implementation in PHP. Prior to 2.12.1, guzzlehttp/psr7 did not reject CR/LF characters in certain first-party HTTP start-line fields: the request method, protocol version, and response reason phrase. If an application placed attacker-controlled data into one of those fields and later serialized the PSR-7 message as raw HTTP/1.x, for example with Message::toString() or an equivalent serializer, the serialized message could contain attacker-controlled header lines. The issue can also be reached through Message::parseRequest() or Message::parseResponse() when malformed raw messages are parsed into first-party PSR-7 objects and then serialized again. Creating or modifying a Request, Response, or other PSR-7 object alone is not sufficient. The issue requires the malformed message to be serialized and written to the network, forwarded, replayed, or otherwise processed by software that does not independently reject the malformed start line. This vulnerability is fixed in 2.12.1. |
| When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value. |
| A flaw has been found in Moovit Bus & Public Transit App 1.18 on Android. This affects an unknown part of the component com.tranzmate. Executing a manipulation can lead to improper authorization in handler for custom url scheme. The attack can only be executed locally. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Net::Statsite::Client versions through 1.1.0 for Perl allow metric injections.
Net::Statsite::Client is a client for the statsite protocol, which is a variant of statsd.
Newlines are not removed from metric names, allowing metric injections.
Values are not sanitised for newlines or other protocol control characters such as colons or pipes, allowing metric injections. |
| aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. Improper validation makes it possible for an attacker to modify the HTTP request (e.g. insert a new header) or even create a new HTTP request if the attacker controls the HTTP method. The vulnerability occurs only if the attacker can control the HTTP method (GET, POST etc.) of the request. If the attacker can control the HTTP version of the request it will be able to modify the request (request smuggling). This issue has been patched in version 3.9.0. |
| Impact:
undici's cookie parser in parseSetCookie percent-decodes cookie values via qsUnescape, turning encoded sequences like %0D%0A, %00, %3B, and %3D into their literal byte equivalents. RFC 6265 ยง5.4 does not specify any decoding and browsers do not decode either.
Applications that parse a Set-Cookie header and then forward the parsed value into a response header (proxies, middleware, SSR frameworks) become vulnerable to HTTP response header injection: an attacker-controlled upstream can inject arbitrary Set-Cookie, Location, or Cache-Control headers into the application's downstream response, enabling session fixation, open redirect, or cache poisoning.
Affected applications are those that use undici's cookie parsing (parseSetCookie, parseCookie, getSetCookies) and forward the parsed cookie value into a response header.
This was introduced in undici 7.0.0 via PR #3789.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, do not forward values returned by parseSetCookie/parseCookie/getSetCookies directly into response headers; sanitize the value first to strip or reject CR, LF, NUL, ;, and = bytes. |
| http-proxy-middleware is node.js http-proxy middleware. From 3.0.4 until 3.0.7 and 4.1.1, fixRequestBody() is the library's documented helper for re-emitting a request body that was already consumed by a body parser. When the outgoing Content-Type is multipart/form-data, it rebuilds the body with handlerFormDataBodyData(), which interpolates each req.body key and value directly into the multipart wire format without neutralizing CR/LF. A \r\n inside a value (or key) lets an attacker close the current part and inject an entirely new form part. Because the proxy's own body parser saw a single opaque value, any gateway-side policy or validation performed on req.body is evaluated against a different set of fields than the upstream backend ultimately parses a request/parameter desynchronization across the trust boundary. This vulnerability is fixed in 3.0.7 and 4.1.1. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.0, attacker-controlled input included into multipart/payload headers can be used to modify a request to inject additional headers or similar. In the unlikely situation that an application is passing user-controlled strings into MultipartWriter.append(headers=...) or Payload.headers, then an attacker may be able to modify the request to inject headers or change the contents of the request. This vulnerability is fixed in 3.14.0. |
| Net::Statsd::Lite versions through 0.10.0 for Perl allowed metric injections.
The values from the set_add method were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Note that version 0.9.0 fixed a similar issue CVE-2026-46719 for metric names. |
| Net::Async::Statsd::Client versions through 0.005 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Metrics::Any::Adapter::SignalFx versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::SignalFx which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _labels function does not check tags labels newlines or statsd control characters. The labels can be used for metric injections. |
| Metrics::Any::Adapter::DogStatsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::DogStatsd which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _tags function does not check tags for newlines or statsd control characters. The tags can be used for metric injections. |
| Metrics::Any::Adapter::Statsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions) allow mutiple metrics, separated by newlines, to be sent per packet.
The send method does not validate the contents of the metric names or values. If the names have newlines and statsd control characters (colon, pipe) then metric injections are possible.
Version 0.04 fixed this by modifying the _make method to block metric names with characters below ASCII 32 (which includes the newline), or colons or pipes. |
| Etsy::StatsD versions through 1.002002 for Perl allow metric injections.
The metric names and values are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Note that the git repository contains an unreleased version with the gauge and set methods that also do not check for potential metric injections. |
| Mojolicious::Plugin::Statsd versions through 0.04 for Perl allowed metric injections.
The metric names and set values were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Version 0.06 changes the module from being a statsd client to using a separate statsd client. It defaults to using a version of Net::Statsd::Tiny that fixes a similar issue (CVE-2026-46720). |
