| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Networking). Supported versions that are affected are Oracle Java SE: 11.0.16.1, 17.0.4.1, 19; Oracle GraalVM Enterprise Edition: 20.3.7, 21.3.3 and 22.2.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| A flaw was found in Corosync. A remote unauthenticated attacker can exploit a wrong return value vulnerability in the Corosync membership commit token sanity check by sending a specially crafted User Datagram Protocol (UDP) packet. This can lead to an out-of-bounds read, causing a denial of service (DoS) and potentially disclosing limited memory contents |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: prevent derefencing NULL ptr in pfn_section_valid()
Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing
memory_section->usage") changed pfn_section_valid() to add a READ_ONCE()
call around "ms->usage" to fix a race with section_deactivate() where
ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough
to prevent NULL pointer dereference. We need to check its value before
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
filelock: fix potential use-after-free in posix_lock_inode
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen. |
| JMSSink in all versions of Log4j 1.x is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration or if the configuration references an LDAP service the attacker has access to. The attacker can provide a TopicConnectionFactoryBindingName configuration causing JMSSink to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-4104. Note this issue only affects Log4j 1.x when specifically configured to use JMSSink, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions. |
| By design, the JDBCAppender in Log4j 1.2.x accepts an SQL statement as a configuration parameter where the values to be inserted are converters from PatternLayout. The message converter, %m, is likely to always be included. This allows attackers to manipulate the SQL by entering crafted strings into input fields or headers of an application that are logged allowing unintended SQL queries to be executed. Note this issue only affects Log4j 1.x when specifically configured to use the JDBCAppender, which is not the default. Beginning in version 2.0-beta8, the JDBCAppender was re-introduced with proper support for parameterized SQL queries and further customization over the columns written to in logs. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions. |
| CVE-2020-9493 identified a deserialization issue that was present in Apache Chainsaw. Prior to Chainsaw V2.0 Chainsaw was a component of Apache Log4j 1.2.x where the same issue exists. |
| The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call the security_mmap_file() LSM hook in remap_file_pages()
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
[PM: subject line tweaks] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: zero-initialize the report buffer
Since the report buffer is used by all kinds of drivers in various ways, let's
zero-initialize it during allocation to make sure that it can't be ever used
to leak kernel memory via specially-crafted report. |
| A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges. |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| This issue was addressed with improved memory handling. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. |
| The net/http package improperly accepts a bare LF as a line terminator in chunked data chunk-size lines. This can permit request smuggling if a net/http server is used in conjunction with a server that incorrectly accepts a bare LF as part of a chunk-ext. |
| In the Linux kernel, the following vulnerability has been resolved:
ndisc: use RCU protection in ndisc_alloc_skb()
ndisc_alloc_skb() can be called without RTNL or RCU being held.
Add RCU protection to avoid possible UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Keep the binding until socket destruction
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| When the assert() function in the GNU C Library versions 2.13 to 2.40 fails, it does not allocate enough space for the assertion failure message string and size information, which may lead to a buffer overflow if the message string size aligns to page size. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds write in trie_get_next_key()
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8. |
