| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| Server-side request forgery (ssrf) in Microsoft Purview allows an unauthorized attacker to elevate privileges over a network. |
| Hidden functionality in the /goform/setSysTools endpoint in Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 allows remote enablement of a Telnet service. By sending a crafted POST request with parameters such as telnetManageEn=true and telnetPwd, an authenticated attacker can activate a Telnet service on port 23. This exposes a privileged diagnostic interface that is not intended for external access and can be used to interact with the underlying system. |
| Snap One WattBox 800 and 820 series firmware versions prior to 2.10.0.0 contain undisclosed diagnostic HTTP endpoints that require only the device MAC address and service tag for authentication, both of which are printed in plaintext on the physical device label. Attackers with access to the device label or documentation containing these values can authenticate to the several endpoints and execute arbitrary commands as root on the device. |
| Server-Side Request Forgery (SSRF) vulnerability in ILLID Share This Image share-this-image allows Server Side Request Forgery.This issue affects Share This Image: from n/a through <= 2.14. |
| OpenClaw before 2026.3.28 contains an SSRF guard bypass vulnerability that fails to block four IPv6 special-use ranges. Attackers can exploit this by crafting URLs targeting internal or non-routable IPv6 addresses to bypass SSRF protections. |
| Dell Disk Library for Mainframe, version(s) DLm 8700/2700 contain(s) a Server-Side Request Forgery (SSRF) vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Server-side request forgery. |
| A weakness has been identified in Xuxueli xxl-job up to 3.3.2. The affected element is the function triggerJob of the file xxl-job-admin/src/main/java/com/xxl/job/admin/service/impl/XxlJobServiceImpl.java of the component trigger Endpoint. This manipulation of the argument addressList causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. There is ongoing doubt regarding the real existence of this vulnerability. The project maintainer explains (translated from Chinese): "Triggers are manually activated and involve login and access control, thus requiring management." The pull request by the researcher got rejected because of that. |
| A weakness has been identified in o2oa up to 10.0. This affects the function FileAction of the file FileAction.java of the component URL Fetching. Executing a manipulation of the argument fileUrl can lead to server-side request forgery. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix leak of kobject name for sub-group space_info
When create_space_info_sub_group() allocates elements of
space_info->sub_group[], kobject_init_and_add() is called for each
element via btrfs_sysfs_add_space_info_type(). However, when
check_removing_space_info() frees these elements, it does not call
btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is
not called and the associated kobj->name objects are leaked.
This memory leak is reproduced by running the blktests test case
zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak
feature reports the following error:
unreferenced object 0xffff888112877d40 (size 16):
comm "mount", pid 1244, jiffies 4294996972
hex dump (first 16 bytes):
64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc......
backtrace (crc 53ffde4d):
__kmalloc_node_track_caller_noprof+0x619/0x870
kstrdup+0x42/0xc0
kobject_set_name_vargs+0x44/0x110
kobject_init_and_add+0xcf/0x150
btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs]
create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs]
create_space_info+0x211/0x320 [btrfs]
btrfs_init_space_info+0x15a/0x1b0 [btrfs]
open_ctree+0x33c7/0x4a50 [btrfs]
btrfs_get_tree.cold+0x9f/0x1ee [btrfs]
vfs_get_tree+0x87/0x2f0
vfs_cmd_create+0xbd/0x280
__do_sys_fsconfig+0x3df/0x990
do_syscall_64+0x136/0x1540
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid the leak, call btrfs_sysfs_remove_space_info() instead of
kfree() for the elements. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix nfeeds state corruption on start_streaming failure
syzbot reported a memory leak in vidtv_psi_service_desc_init [1].
When vidtv_start_streaming() fails inside vidtv_start_feed(), the
nfeeds counter is left incremented even though no feed was actually
started. This corrupts the driver state: subsequent start_feed calls
see nfeeds > 1 and skip starting the mux, while stop_feed calls
eventually try to stop a non-existent stream.
This state corruption can also lead to memory leaks, since the mux
and channel resources may be partially allocated during a failed
start_streaming but never cleaned up, as the stop path finds
dvb->streaming == false and returns early.
Fix by decrementing nfeeds back when start_streaming fails, keeping
the counter in sync with the actual number of active feeds.
[1]
BUG: memory leak
unreferenced object 0xffff888145b50820 (size 32):
comm "syz.0.17", pid 6068, jiffies 4294944486
backtrace (crc 90a0c7d4):
vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288
vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83
vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524
vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| A server-side request forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an attacker to extract sensitive environment variables from the instance through a timing side-channel attack against the notebook rendering service. When private mode was disabled, the notebook viewer followed HTTP redirects without revalidating the destination host, enabling an unauthenticated SSRF to internal services. By chaining this with regex filter queries against an internal API and measuring response time differences, an attacker could infer secret values character by character. Exploitation required that private mode be disabled and that the attacker be able to chain the instance's open redirect endpoint through an external redirect to reach internal services. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.14.26, 3.15.21, 3.16.17, 3.17.14, 3.18.8, 3.19.5, and 3.20.1. This vulnerability was reported via the GitHub Bug Bounty program. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Apache ActiveMQ, Apache ActiveMQ Web.
An authenticated attacker can show malicious content when browsing queues in the web console by overriding the content type to be HTML (instead of XML) and by injecting HTML into a JMS selector field.
This issue affects Apache ActiveMQ: before 5.19.6, from 6.0.0 before 6.2.5; Apache ActiveMQ Web: before 5.19.6, from 6.0.0 before 6.2.5.
Users are recommended to upgrade to version 6.2.5 or 5.19.6, which fixes the issue. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, when Object.prototype has been polluted by any co-dependency with keys that axios reads without a hasOwnProperty guard, an attacker can (a) silently intercept and modify every JSON response before the application sees it, or (b) fully hijack the underlying HTTP transport, gaining access to request credentials, headers, and body. The precondition is prototype pollution from a separate source in the same process. This vulnerability is fixed in 1.15.1 and 0.31.1. |
| Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component.
Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec)
The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy.
Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all.
As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process.
The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration.
Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply.
This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0.
Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue. |
| Server-Side Request Forgery (SSRF) vulnerability in ThimPress WP Pipes allows Server Side Request Forgery. This issue affects WP Pipes: from n/a through 1.4.2. |
| Server-Side Request Forgery (SSRF) vulnerability in Faizaan Gagan Course Migration for LearnDash allows Server Side Request Forgery.This issue affects Course Migration for LearnDash: from 1.0.2 through n/a. |
| Server-Side Request Forgery (SSRF) vulnerability in Envato Envato Elements allows Server Side Request Forgery.This issue affects Envato Elements: from n/a through 2.0.14. |
| Server-Side Request Forgery (SSRF) vulnerability in Foliovision FV Flowplayer Video Player.This issue affects FV Flowplayer Video Player: from n/a through 7.5.43.7212. |
| Server-Side Request Forgery (SSRF) vulnerability in Brave Brave Popup Builder.This issue affects Brave Popup Builder: from n/a through 0.6.5. |
