| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: reject DMA commands with uninitialized length
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: keep err zero after successful ovl_cache_get()
ovl_iterate_merged() stores PTR_ERR(cache) in err before checking
IS_ERR(cache). On success err holds the truncated cache pointer and
can be returned as a bogus non-zero error.
The syzbot reproducer reaches this through overlay-on-overlay readdir:
getdents64
iterate_dir(outer overlay file)
ovl_iterate_merged()
ovl_cache_get()
ovl_dir_read_merged()
ovl_dir_read()
iterate_dir(inner overlay file)
ovl_iterate_merged()
Only compute PTR_ERR(cache) on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock
that the timer callback also acquires, leading to an ABBA deadlock on
SMP systems.
For the output timer (iptfs_timer):
- iptfs_destroy_state() holds x->lock, calls hrtimer_cancel()
- iptfs_delay_timer() callback takes x->lock
For the drop timer (drop_timer):
- iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel()
- iptfs_drop_timer() callback takes drop_lock
Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq
context. When hrtimer_cancel() is called for a soft timer that is
currently executing on another CPU, hrtimer_cancel_wait_running() spins
on softirq_expiry_lock -- the same lock held by the softirq running the
callback. If the callback is blocked waiting for the spinlock held by
the caller of hrtimer_cancel(), a circular dependency forms:
CPU 0: holds lock_A -> waits for softirq_expiry_lock
CPU 1: holds softirq_expiry_lock -> waits for lock_A
Fix by calling hrtimer_cancel() before acquiring the respective locks.
hrtimer_cancel() is safe to call without holding any lock and will wait
for any in-progress callback to complete. For the output timer, the
lock is still acquired afterwards to drain the packet queue. For the
drop timer, the lock/unlock pair is removed entirely since it only
existed to serialize with the timer callback, which hrtimer_cancel()
already guarantees.
Found by source code audit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: fix krealloc() memory leak
Don't just overwrite the original pointer passed to krealloc()
with its return value without checking latter:
MEM = krealloc(MEM, SZ, GFP);
If krealloc() returns NULL, that erases the pointer
to the still allocated memory, hence leaks this memory.
Instead, use a temporary variable, check it's not NULL
and only then assign it to the original pointer:
TMP = krealloc(MEM, SZ, GFP);
if (!TMP) return;
MEM = TMP;
While on it, use krealloc_array(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix possible kfree_skb of ERR_PTR
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling. |
| Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| In JetBrains YouTrack before 2026.2.16593 improper access control allowed reading users' private data via the comment templates endpoint |
| In JetBrains YouTrack before 2026.2.16593 improper authorisation in the app configurations endpoint allowed modifying project settings |
| In JetBrains YouTrack before 2026.2.16593 default role configuration exposed excessive user profile details |
| In JetBrains YouTrack before 2026.2.16593 the websandbox bridge was vulnerable to a prototype pollution attack |
| In JetBrains Kotlin before 2.4.20 code execution was possible via unsafe deserialization in the build cache metadata |
| libnfs through 6.0.2 before 935b8db has an xid integer underflow in READ_IOVEC in rpc_read_from_socket in lib/socket.c during a connection to a crafted NFS server, when the expected pdu size exceeds the absolute pdu size from the xid/record-marker. |
| Zed Attack Proxy (ZAP) ViewState add-on before version 4 contains an insecure deserialization vulnerability that allows attackers who control a proxied web server to achieve arbitrary code execution by embedding a malicious serialized Java object in the javax.faces.ViewState HTTP response parameter. The JSFViewState.decode() method base64-decodes the ViewState value and passes it directly to ObjectInputStream.readObject() without a deserialization filter, allowlist, or type restriction, causing the malicious object to be deserialized within the ZAP JVM when the Desktop UI renders the ViewState panel. |
| The Mattermost Go module github.com/mattermost/mattermost/server/public versions < v0.1.22 fail to validate path parameters when constructing API route paths which allows an attacker to redirect API calls to unintended endpoints via crafted IDs containing path traversal components. Mattermost Advisory ID: MMSA-2025-00532 |
| Teable's v2 REST API controller lacks @Permissions metadata on ORPC endpoints, allowing any authenticated user to bypass authorization checks. Attackers can read table schemas, create tables, and modify or delete records across bases and tables via endpoints like GET /api/v2/tables/get and POST /api/v2/tables/updateRecords. |
| It is possible to bypass the Kerberos pre-authentication check in Apache Kerby by sending a PA-DATA with an unrecognized or unsupported type. Users are recommended to upgrade to version 2.1.2, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/display: fix oops in suspend/shutdown without display
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b95
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display
suspend/resume work on discrete").
(cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) |
