| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up). |
| OpenClaw versions prior to 2026.2.26 contain an approval bypass vulnerability in system.run execution that allows attackers to execute commands from unintended filesystem locations by rebinding writable parent symlinks in the current working directory after approval. An attacker can modify mutable parent symlink path components between approval and execution time to redirect command execution to a different location while preserving the visible working directory string. |
| In the Linux kernel, the following vulnerability has been resolved:
md: suspend array while updating raid_disks via sysfs
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too. |
| Time-of-check time-of-use race condition in the WheaERST SMM module for some Intel(R) reference platforms may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Time-of-check time-of-use race condition in the UEFI PdaSmm module for some Intel(R) reference platforms may allow an information disclosure. System software adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| filelock is a platform-independent file lock for Python. In versions prior to 3.20.1, a Time-of-Check-Time-of-Use (TOCTOU) race condition allows local attackers to corrupt or truncate arbitrary user files through symlink attacks. The vulnerability exists in both Unix and Windows lock file creation where filelock checks if a file exists before opening it with O_TRUNC. An attacker can create a symlink pointing to a victim file in the time gap between the check and open, causing os.open() to follow the symlink and truncate the target file. All users of filelock on Unix, Linux, macOS, and Windows systems are impacted. The vulnerability cascades to dependent libraries. The attack requires local filesystem access and ability to create symlinks (standard user permissions on Unix; Developer Mode on Windows 10+). Exploitation succeeds within 1-3 attempts when lock file paths are predictable. The issue is fixed in version 3.20.1. If immediate upgrade is not possible, use SoftFileLock instead of UnixFileLock/WindowsFileLock (note: different locking semantics, may not be suitable for all use cases); ensure lock file directories have restrictive permissions (chmod 0700) to prevent untrusted users from creating symlinks; and/or monitor lock file directories for suspicious symlinks before running trusted applications. These workarounds provide only partial mitigation. The race condition remains exploitable. Upgrading to version 3.20.1 is strongly recommended. |
| A Time-of-check time-of-use (TOCTOU) race condition in the AMD Secure Processor (ASP) could allow an attacker to modify External Global Memory Interconnect Trusted Agent (XGMI TA) commands as they are processed potentially resulting in loss of confidentiality, integrity, or availability. |
| A Time-of-check time-of-use (TOCTOU) race condition in the AMD Secure Processor (ASP) could allow an attacker to corrupt memory resulting in loss of integrity, confidentiality, or availability. |
| Anti-tampering protection of the Zscaler Client Connector can be bypassed under certain conditions when running the Repair App functionality. This affects Zscaler Client Connector on Windows prior to 4.2.1
|
| Memory corruption may occur while processing message from frontend during allocation. |
| Memory corruption may occur in keyboard virtual device due to guest VM interaction. |
| VMware ESXi, and Workstation contain a TOCTOU (Time-of-Check Time-of-Use) vulnerability that leads to an out-of-bounds write. A malicious actor with local administrative privileges on a virtual machine may exploit this issue to execute code as the virtual machine's VMX process running on the host. |
| Microsoft AutoUpdate (MAU) Elevation of Privilege Vulnerability |
| Memory corruption when blob structure is modified by user-space after kernel verification. |
| Memory corruption occurs during the copying of read data from the EEPROM because the IO configuration is exposed as shared memory. |
| Time-of-check time-of-use (toctou) race condition in Windows Fundamentals allows an authorized attacker to execute code over a network. |
| Time-of-check time-of-use (toctou) race condition in Windows Virtual Machine Bus allows an unauthorized attacker to execute code locally. |
| Time-of-check time-of-use race condition in some Zoom Workplace Apps may allow an authenticated user to conduct an escalation of privilege via local access. |
| Memory corruption while processing INIT and multimode invoke IOCTL calls on FastRPC. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case. |
