| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as critical, was found in JoeyBling SpringBoot_MyBatisPlus up to a6a825513bd688f717dbae3a196bc9c9622fea26. This affects the function SysFileController of the file /file/upload. The manipulation of the argument portraitFile leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. |
| Certain ASUS router models have authentication bypass vulnerability, allowing unauthenticated remote attackers to log in the device. |
| A vulnerability was found in rowboatlabs rowboat up to 8096eaf63b5a0732edd8f812bee05b78e214ee97. It has been rated as critical. Affected by this issue is the function PUT of the file apps/rowboat/app/api/uploads/[fileId]/route.ts of the component Session Handler. The manipulation of the argument params leads to missing authentication. The attack may be launched remotely. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. It is expected that this issue will be fixed in the near future. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| Improper Authentication vulnerability in Wikimedia Foundation Mediawiki - CentralAuth Extension allows : Bypass Authentication.This issue affects Mediawiki - CentralAuth Extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| theshit is a command-line utility that automatically detects and fixes common mistakes in shell commands. Prior to version 0.1.1, the application loads custom Python rules and configuration files from user-writable locations (e.g., `~/.config/theshit/`) without validating ownership or permissions when executed with elevated privileges. If the tool is invoked with `sudo` or otherwise runs with an effective UID of root, it continues to trust configuration files originating from the unprivileged user's environment. This allows a local attacker to inject arbitrary Python code via a malicious rule or configuration file, which is then executed with root privileges. Any system where this tool is executed with elevated privileges is affected. In environments where the tool is permitted to run via `sudo` without a password (`NOPASSWD`), a local unprivileged user can escalate privileges to root without additional interaction. The issue has been fixed in version 0.1.1. The patch introduces strict ownership and permission checks for all configuration files and custom rules. The application now enforces that rules are only loaded if they are owned by the effective user executing the tool. When executed with elevated privileges (`EUID=0`), the application refuses to load any files that are not owned by root or that are writable by non-root users. When executed as a non-root user, it similarly refuses to load rules owned by other users. This prevents both vertical and horizontal privilege escalation via execution of untrusted code. If upgrading is not possible, users should avoid executing the application with `sudo` or as the root user. As a temporary mitigation, ensure that directories containing custom rules and configuration files are owned by root and are not writable by non-root users. Administrators may also audit existing custom rules before running the tool with elevated privileges. |
| DCIM dcTrack allows an attacker to misuse certain remote access features. An authenticated user with access to the appliance's virtual console could exploit these features to redirect network traffic, potentially accessing restricted services or data on the host machine. |
| OpenObserve is a cloud-native observability platform. Prior to version 0.16.0, organization invitation tokens do not expire once issued, remain valid even after the invited user is removed from the organization, and allow multiple invitations to the same email with different roles where all issued links remain valid simultaneously. This results in broken access control where a removed or demoted user can regain access or escalate privileges. This issue has been patched in version 0.16.0. |
| A missing authentication mechanism in the web management API components of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows unauthenticated attackers on the local network to modify router and network configurations. By invoking operations whose names end with "*_nocommit" and supplying the parameters expected by the invoked function, an attacker can change configuration data, including SSID, Wi-Fi credentials, and administrative passwords, without authentication or an existing session. |
| A lack of session validation in the web API component of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows remote unauthenticated attackers to access administrative information-retrieval functions intended for authenticated users. By invoking "get_*" operations, attackers can obtain device configuration data, including plaintext credentials, without authentication or an existing session. |
| Apollo Federation is an architecture for declaratively composing APIs into a unified graph. A vulnerability in versions of Apollo Federation's composition logic prior to 2.9.5, 2.10.4, 2.11.5, and 2.12.1 allowed some queries to Apollo Router to improperly bypass access controls on types/fields. Apollo Federation incorrectly allowed user-defined access control directives on interface types/fields, which could be bypassed by instead querying the implementing object types/fields in Apollo Router via inline fragments, for example. A fix to versions 2.9.5, 2.10.4, 2.11.5, and 2.12.1 of composition logic in Federation now disallows interfaces types and fields to contain user-defined access control directives. Some workarounds are available. Users of Apollo Rover with an unpatched composition version or are using the Apollo Studio build pipeline with Federation version 2.8 or below should manually copy the access control requirements on interface types/fields to each implementing object type/field where appropriate. Do not remove those access control requirements from the interface types/fields, as unpatched Apollo Composition will not automatically generate them in the supergraph schema. Customers not using Apollo Router access control features (`@authenticated`, `@requiresScopes`, or `@policy` directives) or not specifying access control requirements on interface types/fields are not affected and do not need to take action. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. |
| Wazuh is a security detection, visibility, and compliance open source project. From version 4.9.0 to before 4.13.0, the Wazuh API – Agent Configuration in certain configurations allows authenticated users with read-only API roles to retrieve agent enrollment credentials through the /utils/configuration endpoint. These credentials can be used to register new agents within the same Wazuh tenant without requiring elevated permissions through the UI. This issue has been patched in version 4.13.0. |
| Kottster is a self hosted Node.js admin panel. From versions 3.2.0 to before 3.3.2, Kottster contains a pre-authentication remote code execution (RCE) vulnerability when running in development mode. This affects development mode only, production deployments were never affected. This issue has been fixed in version 3.3.2. |
| A local privilege escalation vulnerability exists during the installation of Epic Games Store via the Microsoft Store. A low-privilege user can replace a DLL file during the installation process, which may result in unintended elevation of privileges. |
| Permission vulnerability in the mobile application (com.afmobi.boomplayer) may lead to the risk of unauthorized operation. |
| Anyquery is an SQL query engine built on top of SQLite. Versions 0.4.3 and below allow attackers who have already gained access to localhost, even with low privileges, to use the http server through the port unauthenticated, and access private integration data like emails, without any warning of a foreign login from the provider. This issue is fixed in version 0.4.4. |
| Karapace is an open-source implementation of Kafka REST and Schema Registry. Versions 5.0.0 and 5.0.1 contain an authentication bypass vulnerability when configured to use OAuth 2.0 Bearer Token authentication. If a request is sent without an Authorization header, the token validation logic is skipped entirely, allowing an unauthenticated user to read and write to Schema Registry endpoints that should otherwise be protected. This effectively renders the OAuth authentication mechanism ineffective. This issue is fixed in version 5.0.2. |
