Export limit exceeded: 357475 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (83333 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45985 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-46021 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. | ||||
| CVE-2026-46028 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state. | ||||
| CVE-2026-48153 | 1 Budibase | 1 Budibase | 2026-05-28 | 8.5 High |
| Budibase is an open-source low-code platform. Prior to 3.39.0, fetchToken in the OAuth2 SDK makes a POST to a builder-supplied URL with plain node-fetch, skipping the blacklist.isBlacklisted check that every other outbound fetch path in the codebase uses. The Joi schema for the OAuth2 URL has no scheme or host restriction. This vulnerability is fixed in 3.39.0. | ||||
| CVE-2026-46032 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit() returns an error code that is ignored by most callers, and continues to run L1 with corrupted state. A sane recovery is not possible in this case, and HW behavior is to cause a shutdown. Inject a triple fault instead, and do not return early from nested_svm_vmexit(). Continue cleaning up the vCPU state (e.g. clear pending exceptions), to handle the failure as gracefully as possible. From the APM: Upon #VMEXIT, the processor performs the following actions in order to return to the host execution context: ... if (illegal host state loaded, or exception while loading host state) shutdown else execute first host instruction following the VMRUN Remove the return value of nested_svm_vmexit(), which is mostly unchecked anyway. | ||||
| CVE-2026-46045 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data. | ||||
| CVE-2026-45717 | 1 Budibase | 1 Budibase | 2026-05-28 | 8.8 High |
| Budibase is an open-source low-code platform. Prior to 3.38.1, Budibase exposes a REST API for datasource management. The route PUT /api/datasources/:datasourceId is registered in the authorizedRoutes group with TABLE/READ permission. This is the same authorization level as the read endpoint (GET /api/datasources/:datasourceId). Every authenticated Budibase app user with the BASIC built-in role or higher carries TABLE/WRITE (and therefore TABLE/READ) permissions, and the datasource update controller performs no additional builder check. As a result, any authenticated non-builder app user can submit a PUT request to rewrite a datasource's config object — including the connection host, port, database credentials, or the base url of a REST datasource. Because no network-level SSRF protection is applied to SQL driver connections, redirecting a PostgreSQL/MySQL/MongoDB datasource to an internal IP address succeeds and the attacker can probe or interact with internal services on arbitrary ports. This vulnerability is fixed in 3.38.1. | ||||
| CVE-2026-45548 | 1 Budibase | 1 Budibase | 2026-05-28 | 7.7 High |
| Budibase is an open-source low-code platform. Prior to 3.34.8, the processUrlFile function in packages/server/src/automations/steps/ai/extract.ts uses fetch(fileUrl) directly without the IP blacklist validation that is consistently applied to all other automation steps. This allows an authenticated user to trigger server-side requests to internal network addresses. This vulnerability is fixed in 3.34.8. | ||||
| CVE-2026-31266 | 1 Craftcms | 1 Craft Cms | 2026-05-28 | 7.3 High |
| Craft CMS 5.9.5 and earlier contains a Missing Authorization vulnerability in the migrate endpoint (/actions/app/migrate). | ||||
| CVE-2026-8360 | 1 Gladinet | 1 Triofox | 2026-05-28 | 7.5 High |
| Function calls to WOSCommonUtil.dll!WOSSysInfoGetDeviceInterface() in various DLLs (i.e., WOSProfileMgrModule.dll, WOSWebDavModule.dll) can return a NULL pointer (i.e., when no user is logged into the Triofox Server Agent Management Console). The returned NULL pointer is not checked before being dereferenced. | ||||
| CVE-2026-45983 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: never defer requests during idmap lookup During v4 request compound arg decoding, some ops (e.g. SETATTR) can trigger idmap lookup upcalls. When those upcall responses get delayed beyond the allowed time limit, cache_check() will mark the request for deferral and cause it to be dropped. This prevents nfs4svc_encode_compoundres from being executed, and thus the session slot flag NFSD4_SLOT_INUSE never gets cleared. Subsequent client requests will fail with NFSERR_JUKEBOX, given that the slot will be marked as in-use, making the SEQUENCE op fail. Fix this by making sure that the RQ_USEDEFERRAL flag is always clear during nfs4svc_decode_compoundargs(), since no v4 request should ever be deferred. | ||||
| CVE-2026-45837 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in arena_vm_close on fork arena_vm_open() only bumps vml->mmap_count but never registers the child VMA in arena->vma_list. The vml->vma always points at the parent VMA, so after parent munmap the pointer dangles. If the child then calls bpf_arena_free_pages(), zap_pages() reads the stale vml->vma triggering use-after-free. Fix this by preventing the arena VMA from being inherited across fork with VM_DONTCOPY, and preventing VMA splits via the may_split callback. Also reject mremap with a .mremap callback returning -EINVAL. A same-size mremap(MREMAP_FIXED) on the full arena VMA reaches copy_vma() through the following path: check_prep_vma() - returns 0 early: new_len == old_len skips VM_DONTEXPAND check prep_move_vma() - vm_start == old_addr and vm_end == old_addr + old_len so may_split is never called move_vma() copy_vma_and_data() copy_vma() vm_area_dup() - copies vm_private_data (vml pointer) vm_ops->open() - bumps vml->mmap_count vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA The refcount ensures the rollback's arena_vm_close does not free the vml shared with the original VMA. | ||||
| CVE-2026-48152 | 1 Budibase | 1 Budibase | 2026-05-28 | 8.1 High |
| Budibase is an open-source low-code platform. Prior to 3.39.0, the single-datasource GET and PUT routes are guarded by generic TABLE READ, not by Builder/Admin permission or datasource-specific ownership/resource checks. The built-in Basic app user role maps to the WRITE permission set, which includes table read/write and query write. A Basic user can therefore read an existing REST datasource, receive redacted authConfigs values, submit an update that changes only config.url while keeping the redacted placeholders, and trigger an existing saved relative-path REST query. During update, mergeConfigs() restores the old stored secret when it sees the redaction placeholder. During query execution, Budibase prefixes the attacker-controlled datasource config.url to the relative query path and applies the resolved stored auth headers. The result is server-side disclosure of the builder-configured REST Authorization secret to an attacker-controlled listener. This vulnerability is fixed in 3.39.0. | ||||
| CVE-2026-45716 | 1 Budibase | 1 Budibase | 2026-05-28 | 8.8 High |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the POST /api/global/users/onboard endpoint is protected by workspaceBuilderOrAdmin middleware, allowing any user with builder permissions to access it. When SMTP email is not configured (the default for self-hosted Budibase instances), this endpoint bypasses the admin-restricted invite flow and directly creates users via bulkCreate, accepting arbitrary admin and builder role assignments from the request body. A builder-level user can create a new global admin account and receive the generated password in the response, achieving full privilege escalation. This vulnerability is fixed in 3.38.1. | ||||
| CVE-2026-8361 | 1 Gladinet | 1 Triofox | 2026-05-28 | 7.5 High |
| A path traversal vulnerability exists in WOSDefaultHttpModule.dll when processing a URL path starting with /woshome | ||||
| CVE-2026-8359 | 1 Gladinet | 1 Triofox | 2026-05-28 | 7.5 High |
| When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0. | ||||
| CVE-2026-48691 | 1 Pavel-odintsov | 1 Fastnetmon | 2026-05-28 | 7.3 High |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow in the BGP AS_PATH attribute encoder. In src/bgp_protocol.hpp, the IPv4UnicastAnnounce::get_attributes() function computes attribute_length as 'sizeof(bgp_as_path_segment_element_t) + this->as_path_asns.size() * sizeof(uint32_t)' and stores it in a uint8_t field (line 600-605). Since uint8_t can only hold values 0-255, an AS_PATH containing more than 63 ASNs (2 + 64*4 = 258 > 255) causes silent truncation. The truncated length is used for buffer sizing, while the actual data written is the full untruncated amount, resulting in a heap buffer overflow. Similarly, the path_segment_length field at line 621 is also uint8_t, truncating with more than 255 ASNs. | ||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-48687 | 1 Pavel-odintsov | 1 Fastnetmon | 2026-05-27 | 8.1 High |
| FastNetMon Community Edition through 1.2.9 contains an OS command injection vulnerability in the Juniper router integration plugin. The _log() function in src/juniper_plugin/fastnetmon_juniper.php (lines 117-118) constructs shell commands by concatenating the $msg parameter directly into exec() calls: exec("echo `date` \"- {FASTNETMON] - " . $msg . " \" >> " . $FILE_LOG_TMP). The $msg variable contains unsanitized data derived from command-line arguments argv[1] through argv[3], which represent the attack IP address, direction, and power. While FastNetMon's C++ core currently passes IP addresses via inet_ntoa() (which only produces safe dotted-decimal notation), the PHP script performs no input validation or shell escaping. If the script is invoked directly, by another orchestration system, or if future code changes pass string-sourced IPs, arbitrary commands can be injected. The correct fix is to replace exec() with file_put_contents() or use escapeshellarg() on all parameters. | ||||