| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability exists in WOSDefaultHttpModule.dll when processing a URL path starting with /woshome |
| When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0. |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow in the BGP AS_PATH attribute encoder. In src/bgp_protocol.hpp, the IPv4UnicastAnnounce::get_attributes() function computes attribute_length as 'sizeof(bgp_as_path_segment_element_t) + this->as_path_asns.size() * sizeof(uint32_t)' and stores it in a uint8_t field (line 600-605). Since uint8_t can only hold values 0-255, an AS_PATH containing more than 63 ASNs (2 + 64*4 = 258 > 255) causes silent truncation. The truncated length is used for buffer sizing, while the actual data written is the full untruncated amount, resulting in a heap buffer overflow. Similarly, the path_segment_length field at line 621 is also uint8_t, truncating with more than 255 ASNs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| FastNetMon Community Edition through 1.2.9 contains an OS command injection vulnerability in the Juniper router integration plugin. The _log() function in src/juniper_plugin/fastnetmon_juniper.php (lines 117-118) constructs shell commands by concatenating the $msg parameter directly into exec() calls: exec("echo `date` \"- {FASTNETMON] - " . $msg . " \" >> " . $FILE_LOG_TMP). The $msg variable contains unsanitized data derived from command-line arguments argv[1] through argv[3], which represent the attack IP address, direction, and power. While FastNetMon's C++ core currently passes IP addresses via inet_ntoa() (which only produces safe dotted-decimal notation), the PHP script performs no input validation or shell escaping. If the script is invoked directly, by another orchestration system, or if future code changes pass string-sourced IPs, arbitrary commands can be injected. The correct fix is to replace exec() with file_put_contents() or use escapeshellarg() on all parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, alloc_frozen_pages_nolock() called from NMI context can
re-enter rmqueue() and acquire the zone lock that the interrupted
context is already holding, corrupting the freelists.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
rmqueue.isra.0+0x2a9/0xa70
get_page_from_freelist+0xeb/0x450
alloc_frozen_pages_nolock_noprof+0x111/0x1e0
allocate_slab+0x42a/0x500
___slab_alloc+0xa7/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deferred split queue races during migration
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: Validate SQE128 flag before accessing the cmd
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't cache extent during splitting extent
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split. |
| FastNetMon Community Edition through 1.2.9 contains a configuration injection vulnerability in the Juniper router integration plugin. In src/juniper_plugin/fastnetmon_juniper.php, the $IP_ATTACK variable (received from argv[1]) is directly interpolated into Juniper NETCONF set-configuration commands at lines 69 and 90 without any validation or sanitization. Line 69: $conn->load_set_configuration("set routing-options static route {$IP_ATTACK} community 65535:666 discard"). Line 90: $conn->load_set_configuration("delete routing-options static route {$IP_ATTACK}/32"). An attacker who can control the IP address string can inject additional Juniper CLI configuration commands by embedding newline characters followed by arbitrary set/delete commands. This could modify the router's routing table, firewall filters, user accounts, or any other configuration element accessible via NETCONF. The impact is full router compromise. |
| IO::Compress versions before 2.220 for Perl can execute arbitrary code in File::GlobMapper via an attacker-controlled output glob.
_parseOutputGlob() wraps the caller-supplied output glob string in double quotes and stores it in the parser state; _getFiles() then runs the stored expression through eval STRING. A literal double quote in the output glob closes the dquote wrapper, and the characters that follow are evaluated as Perl.
Arbitrary Perl in the output glob executes at the calling process's privilege. |
| Improper Isolation or Compartmentalization vulnerability in Apache Syncope.
An administrator with adequate entitlements for Implementations can create a malicious Groovy class containing untrusted code reaching a non-sandboxed execution path via the class static initializer.
This issue affects Apache Syncope: 3.0 through 3.0.16, 4.0 through 4.0.5, 4.1.0.
Users are recommended to upgrade to version 4.0.6 / 4.1.1, which fix this issue by forcing even the static initializer in Groovy code to run in a sandbox. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.8 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that, under certain conditions, could have allowed an authenticated user to cause specific Duo AI workflows to run under another user's identity due to improper user identity resolution when triggering Duo AI workflow runners. |
| Home Assistant Community Store (HACS) prior to 1.10.0 contains a path traversal vulnerability that allows unauthenticated attackers to read sensitive files by traversing directories via the /hacsfiles/ endpoint. Attackers can retrieve the .storage/auth file containing user credentials and refresh tokens, then craft valid JWT tokens to gain administrative access to Home Assistant instances. |
| CWE-312: Cleartext Storage of Sensitive Information vulnerability exists that could cause the disclosure of a sensitive information which could result in revealing protected source code and loss of confidentiality, When an authorized attacker accesses the source code for editing or compiling it. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26. A malicious app may be able to gain root privileges. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| A vulnerability was found in Edimax EW-7438RPn up to 1.31. Affected by this vulnerability is an unknown functionality of the file /goform/mp of the component webs. The manipulation of the argument webs results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Due to a lack of user account state validation during authentication, locked user accounts can be successfully authenticated using Magic Link or Pass Key methods. This bypasses the intended security control that should prevent access to accounts that have been locked.
This vulnerability may allow unauthorized access to applications and sensitive data associated with accounts that should have been restricted via the account lock mechanism. It also undermines the effectiveness of the account lock mechanism intended to prevent further login attempts. |
