| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Blinko is an AI-powered card note-taking project. Prior to version 1.8.4, the MCP (Model Context Protocol) server creation function allows specifying arbitrary commands and arguments, which are executed when testing the connection. This issue has been patched in version 1.8.4. |
| Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In versions prior to 3.3.12, due to vulnerabilities in TeXLive and obscure LaTeX syntax that allowed circumventing Indico's LaTeX sanitizer, it is possible to use specially-crafted LaTeX snippets which can read local files or execute code with the privileges of the user running Indico on the server. Note that if server-side LaTeX rendering is not in use (ie `XELATEX_PATH` was not set in `indico.conf`), this vulnerability does not apply. It is recommended to update to Indico 3.3.12 as soon as possible. It is also strongly recommended to enable the containerized LaTeX renderer (using `podman`), which isolates it from the rest of the system. As a workaround, remove the `XELATEX_PATH` setting from `indico.conf` (or comment it out or set it to `None`) and restart the `indico-uwsgi` and `indico-celery` services to disable LaTeX functionality. |
| Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, when serving files through Active Storage's proxy delivery mode, the proxy controller loads the entire requested byte range into memory before sending it. A request with a large or unbounded Range header (e.g. `bytes=0-`) could cause the server to allocate memory proportional to the file size, possibly resulting in a DoS vulnerability through memory exhaustion. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits
Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of
dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used,
and this macro can generate more than 2 instructions. At the same
time, the code in ftrace assumes that no more than 2 instructions can
be generated, which is why it stores them in an int[2] array. However,
as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA)
causes a buffer overflow when _mcount is beyond 32 bits. This leads to
corruption of the variables located in the __read_mostly section.
This corruption was observed because the variable
__cpu_primary_thread_mask was corrupted, causing a hang very early
during boot.
This fix prevents the corruption by avoiding the generation of
instructions if they could exceed 2 instructions in
length. Fortunately, insn_la_mcount is only used if the instrumented
code is located outside the kernel code section, so dynamic ftrace can
still be used, albeit in a more limited scope. This is still
preferable to corrupting memory and/or crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats()
Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters
update") added three new counters and placed them after
BNXT_RE_OUT_OF_SEQ_ERR.
BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware
statistics with different num_counters values on chip_gen_p5_p7 devices.
As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating
hw_stats, which leads to an out-of-bounds write in
bnxt_re_copy_err_stats().
The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and
BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not
only p5/p7 devices.
Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they
are included in the generic counter set. |
| OpenClaw versions prior to 2026.2.21 contain an authentication bypass vulnerability in the Control UI when allowInsecureAuth is explicitly enabled and the gateway is exposed over plaintext HTTP, allowing attackers to bypass device identity and pairing verification. An attacker with leaked or intercepted credentials can obtain high-privilege Control UI access by exploiting the lack of secure authentication enforcement over unencrypted HTTP connections. |
| OpenClaw versions prior to 2026.2.19 contain a command injection vulnerability in the Lobster extension tool execution that uses Windows shell fallback with shell: true after spawn failures. Attackers can inject shell metacharacters in command arguments to execute arbitrary commands when subprocess launch fails with EINVAL or ENOENT errors. |
| OpenClaw versions prior to 2026.2.19 tools.exec.safeBins contains an input validation bypass vulnerability that allows attackers to execute unintended filesystem operations through sort output flags or recursive grep flags. Attackers with command execution access can leverage sort -o flag for arbitrary file writes or grep -R flag for recursive file reads, circumventing intended stdin-only restrictions. |
| OpenClaw versions prior to 2026.2.22 contain an authorization bypass vulnerability in allow-always wrapper persistence that allows attackers to bypass approval checks by persisting wrapper-level allowlist entries instead of validating inner executable intent. Remote attackers can approve benign wrapped system.run commands and subsequently execute different payloads without approval, enabling remote code execution on gateway and node-host execution flows. |
| OpenClaw versions prior to 2026.2.22 contain an allowlist bypass vulnerability in system.run that allows attackers to execute non-allowlisted commands by splitting command substitution using shell line-continuation characters. Attackers can bypass security analysis by injecting $\\ followed by a newline and opening parenthesis inside double quotes, causing the shell to fold the line continuation into executable command substitution that circumvents approval boundaries. |
| OpenClaw versions prior to 2026.2.22 in macOS node-host system.run contain an allowlist bypass vulnerability that allows remote attackers to execute non-allowlisted commands by exploiting improper parsing of command substitution tokens. Attackers can craft shell payloads with command substitution syntax within double-quoted text to bypass security restrictions and execute arbitrary commands on the system. |
| OpenClaw versions prior to 2026.2.22 contain an allowlist bypass vulnerability in the safeBins configuration that allows attackers to invoke external helpers through the compress-program option. When sort is explicitly added to tools.exec.safeBins, remote attackers can bypass intended safe-bin approval constraints by leveraging the compress-program parameter to execute unauthorized external programs. |
| Free Float FTP 1.0 contains a buffer overflow vulnerability in the STOR command handler that allows remote attackers to execute arbitrary code by sending a crafted STOR request with an oversized payload. Attackers can authenticate with anonymous credentials and send a malicious STOR command containing 247 bytes of padding followed by a return address and shellcode to trigger code execution on the FTP server. |
| WWBN AVideo is an open source video platform. Prior to version 26.0, the `uploadVideoToLinkedIn()` method in the SocialMediaPublisher plugin constructs a shell command by directly interpolating an upload URL received from LinkedIn's API response, without sanitization via `escapeshellarg()`. If an attacker can influence the LinkedIn API response (via MITM, compromised OAuth token, or API compromise), they can inject arbitrary OS commands that execute as the web server user. Version 26.0 contains a fix for the issue. |
| Due to the improper neutralisation of special elements used in an OS command, an unauthenticated remote attacker can exploit an RCE vulnerability in the com_mb24sysapi module, resulting in full system compromise. This vulnerability is a variant attack for CVE-2020-10383. |
| NetAware 1.20 contains a buffer overflow vulnerability in the Share Name field that allows local attackers to crash the application by supplying an excessively long string. Attackers can trigger a denial of service by pasting a 1000-byte buffer into the Share Name parameter when adding a new share through the Manage Shares interface. |
| NetAware 1.20 contains a buffer overflow vulnerability in the User Blocking feature that allows local attackers to crash the application by supplying oversized input. Attackers can paste a malicious buffer of 512 bytes into the 'Add a website or keyword to be filtered' field and trigger a crash when removing the created block. |
| TwistedBrush Pro Studio 24.06 contains a denial of service vulnerability in the Resize Image function that allows local attackers to crash the application by supplying an excessively long buffer. Attackers can paste a malicious string into the New Width or New Height field to trigger a buffer overflow that causes the application to crash. |
| jetAudio 8.1.7 contains a buffer overflow vulnerability in the video converter component that allows local attackers to crash the application by supplying an oversized string in the File Naming field. Attackers can paste a malicious buffer of 512 bytes into the File Naming parameter and trigger the crash by clicking the Preview button, causing a denial of service. |
