Search Results (5478 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-31414 1 Linux 1 Linux Kernel 2026-04-29 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb.
CVE-2026-23443 1 Linux 1 Linux Kernel 2026-04-29 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set.
CVE-2026-0918 1 Tp-link 7 Tapo, Tapo C220, Tapo C220 Firmware and 4 more 2026-04-29 7.5 High
The Tapo C100 v5, C220 v1 and C520WS v2 cameras’ HTTP service does not safely handle POST requests containing an excessively large Content-Length header. The resulting failed memory allocation triggers a NULL pointer dereference, causing the main service process to crash. An unauthenticated attacker can repeatedly crash the service, causing temporary denial of service. The device restarts automatically, and repeated requests can keep it unavailable.
CVE-2026-20064 1 Cisco 2 Firepower Threat Defense Software, Secure Firewall Threat Defense 2026-04-28 6.5 Medium
A vulnerability in of Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
CVE-2026-31546 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave.
CVE-2026-31519 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---
CVE-2026-31592 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage.
CVE-2025-31202 1 Apple 5 Ipados, Iphone Os, Macos and 2 more 2026-04-28 5.5 Medium
A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, tvOS 18.4, visionOS 2.4. An attacker on the local network may be able to cause a denial-of-service.
CVE-2025-24179 1 Apple 5 Ipados, Iphone Os, Macos and 2 more 2026-04-28 5.7 Medium
A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.6, macOS Sequoia 15.3, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.3, visionOS 2.3. An attacker on the local network may be able to cause a denial-of-service.
CVE-2026-31540 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Check set_default_submission() before deferencing When the i915 driver firmware binaries are not present, the set_default_submission pointer is not set. This pointer is dereferenced during suspend anyways. Add a check to make sure it is set before dereferencing. [ 23.289926] PM: suspend entry (deep) [ 23.293558] Filesystems sync: 0.000 seconds [ 23.298010] Freezing user space processes [ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds) [ 23.309766] OOM killer disabled. [ 23.313027] Freezing remaining freezable tasks [ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 23.342038] serial 00:05: disabled [ 23.345719] serial 00:02: disabled [ 23.349342] serial 00:01: disabled [ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 23.361635] ata1.00: Entering standby power mode [ 23.368863] ata2.00: Entering standby power mode [ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.452194] #PF: supervisor instruction fetch in kernel mode [ 23.457896] #PF: error_code(0x0010) - not-present page [ 23.463065] PGD 0 P4D 0 [ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI [ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary) [ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 23.496511] Workqueue: async async_run_entry_fn [ 23.501087] RIP: 0010:0x0 [ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246 [ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f [ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000 [ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff [ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8 [ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68 [ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000 [ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0 [ 23.572539] PKRU: 55555554 [ 23.575281] Call Trace: [ 23.577770] <TASK> [ 23.579905] intel_engines_reset_default_submission+0x42/0x60 [ 23.585695] __intel_gt_unset_wedged+0x191/0x200 [ 23.590360] intel_gt_unset_wedged+0x20/0x40 [ 23.594675] gt_sanitize+0x15e/0x170 [ 23.598290] i915_gem_suspend_late+0x6b/0x180 [ 23.602692] i915_drm_suspend_late+0x35/0xf0 [ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10 [ 23.611843] dpm_run_callback+0x78/0x1c0 [ 23.615817] device_suspend_late+0xde/0x2e0 [ 23.620037] async_suspend_late+0x18/0x30 [ 23.624082] async_run_entry_fn+0x25/0xa0 [ 23.628129] process_one_work+0x15b/0x380 [ 23.632182] worker_thread+0x2a5/0x3c0 [ 23.635973] ? __pfx_worker_thread+0x10/0x10 [ 23.640279] kthread+0xf6/0x1f0 [ 23.643464] ? __pfx_kthread+0x10/0x10 [ 23.647263] ? __pfx_kthread+0x10/0x10 [ 23.651045] ret_from_fork+0x131/0x190 [ 23.654837] ? __pfx_kthread+0x10/0x10 [ 23.658634] ret_from_fork_asm+0x1a/0x30 [ 23.662597] </TASK> [ 23.664826] Modules linked in: [ 23.667914] CR2: 0000000000000000 [ 23.671271] ------------[ cut here ]------------ (cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)
CVE-2026-31544 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix NULL dereference on notify error path Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier registration for unsupported events") the call chains leading to the helper __scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to get an handler for the requested event key, while the current helper can still return a NULL when no handler could be found or created. Fix by forcing an ERR_PTR return value when the handler reference is NULL.
CVE-2026-31615 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: renesas_usb3: validate endpoint index in standard request handlers The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint number from the host-supplied wIndex without any sort of validation. Fix this up by validating the number of endpoints actually match up with the number the device has before attempting to dereference a pointer based on this math. This is just like what was done in commit ee0d382feb44 ("usb: gadget: aspeed_udc: validate endpoint index for ast udc") for the aspeed driver.
CVE-2026-31515 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: af_key: validate families in pfkey_send_migrate() syzbot was able to trigger a crash in skb_put() [1] Issue is that pfkey_send_migrate() does not check old/new families, and that set_ipsecrequest() @family argument was truncated, thus possibly overfilling the skb. Validate families early, do not wait set_ipsecrequest(). [1] skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL> kernel BUG at net/core/skbuff.c:214 ! Call Trace: <TASK> skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150
CVE-2016-10708 5 Canonical, Debian, Netapp and 2 more 13 Ubuntu Linux, Debian Linux, Cloud Backup and 10 more 2026-04-28 7.5 High
sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c.
CVE-2026-31510 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb Before using sk pointer, check if it is null. Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: <TASK> __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? __pfx___mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception
CVE-2026-31620 1 Linux 1 Linux Kernel 2026-04-28 4.6 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0 A malicious USB device with the TASCAM US-144MKII device id can have a configuration containing bInterfaceNumber=1 but no interface 0. USB configuration descriptors are not required to assign interface numbers sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will then be dereferenced directly. Fix this up by checking the return value properly.
CVE-2026-31621 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bnge: return after auxiliary_device_uninit() in error path When auxiliary_device_add() fails, the error block calls auxiliary_device_uninit() but does not return. The uninit drops the last reference and synchronously runs bnge_aux_dev_release(), which sets bd->auxr_dev = NULL and frees the underlying object. The subsequent bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a good thing to have happen when trying to clean up from an error. Add the missing return, as the auxiliary bus documentation states is a requirement (seems that LLM tools read documentation better than humans do...)
CVE-2026-40355 1 Mit 1 Kerberos 5 2026-04-28 5.9 Medium
In MIT Kerberos 5 (aka krb5) before 1.22.3, there is a NULL pointer dereference if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, causing the process to terminate in parse_nego_message.
CVE-2026-31481 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either.
CVE-2025-24251 1 Apple 6 Ipados, Iphone Os, Macos and 3 more 2026-04-28 6.5 Medium
The issue was addressed with improved checks. This issue is fixed in iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.4, visionOS 2.4, watchOS 11.4. An attacker on the local network may cause an unexpected app termination.