| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Handle cameras with invalid descriptors
If the source entity does not contain any pads, do not create a link. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_dsp_rproc: Add custom memory copy implementation for i.MX DSP Cores
The IRAM is part of the HiFi DSP.
According to hardware specification only 32-bits write are allowed
otherwise we get a Kernel panic.
Therefore add a custom memory copy and memset functions to deal with
the above restriction. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't check PageError in __extent_writepage
__extent_writepage currenly sets PageError whenever any error happens,
and the also checks for PageError to decide if to call error handling.
This leads to very unclear responsibility for cleaning up on errors.
In the VM and generic writeback helpers the basic idea is that once
I/O is fired off all error handling responsibility is delegated to the
end I/O handler. But if that end I/O handler sets the PageError bit,
and the submitter checks it, the bit could in some cases leak into the
submission context for fast enough I/O.
Fix this by simply not checking PageError and just using the local
ret variable to check for submission errors. This also fundamentally
solves the long problem documented in a comment in __extent_writepage
by never leaking the error bit into the submission context. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Put the cdns set active part outside the spin lock
The device may be scheduled during the resume process,
so this cannot appear in atomic operations. Since
pm_runtime_set_active will resume suppliers, put set
active outside the spin lock, which is only used to
protect the struct cdns data structure, otherwise the
kernel will report the following warning:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1
Hardware name: Freescale i.MX8QM MEK (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x64/0x80
dump_stack+0x1c/0x38
__might_resched+0x1fc/0x240
__might_sleep+0x68/0xc0
__pm_runtime_resume+0x9c/0xe0
rpm_get_suppliers+0x68/0x1b0
__pm_runtime_set_status+0x298/0x560
cdns_resume+0xb0/0x1c0
cdns3_controller_resume.isra.0+0x1e0/0x250
cdns3_plat_resume+0x28/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
Commit 56124d6c87fd ("fsverity: support enabling with tree block size <
PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read
the file's data, instead of direct pagecache accesses.
An unintended consequence of this is that the
'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became
reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called
on a fd opened with access mode 3, which means "ioctl access only".
Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But
ioctl-only fds are a weird Linux extension that is rarely used and that
few people even know about. (The documentation for FS_IOC_ENABLE_VERITY
even specifically says it requires O_RDONLY.) It's probably not
worthwhile to make the ioctl internally open a new fd just to handle
this case. Thus, just reject the ioctl on such fds for now. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: Do not broadcast to other cpus when starting a counter
This command:
$ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000
gives rise to this kernel warning:
[ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436
[ 444.364515] Modules linked in:
[ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73
[ 444.364771] Hardware name: riscv-virtio,qemu (DT)
[ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436
[ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32
[ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800
[ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0
[ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0
[ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000
[ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100
[ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000
[ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98
[ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000
[ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001
[ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6
[ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0
[ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436
[ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32
[ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa
[ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66
[ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac
[ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c
[ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e
[ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96
[ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52
[ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98
[ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a
[ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da
[ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a
[ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114
[ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a
[ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46
[ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74
[ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e
[ 444.365796] ---[ end trace 0000000000000000 ]---
That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic
in riscv SBI mmap support") was wrong since there is no need to broadcast
to other cpus when starting a counter, that's only needed in mmap when
the counters could have already been started on other cpus, so simply
remove this broadcast. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp : ffff800013f0bac0
[ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed! |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix SError of kernel panic when closed
SError of kernel panic rarely happened while testing fluster.
The root cause was to enter suspend mode because timeout of autosuspend
delay happened.
[ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834495] sp : ffff8000856e3a30
[ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130
[ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80
[ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000
[ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000
[ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618
[ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000
[ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028
[ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000
[ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000
[ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000
[ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834556] Call trace:
[ 48.834559] dump_backtrace+0x94/0xec
[ 48.834574] show_stack+0x18/0x24
[ 48.834579] dump_stack_lvl+0x38/0x90
[ 48.834585] dump_stack+0x18/0x24
[ 48.834588] panic+0x35c/0x3e0
[ 48.834592] nmi_panic+0x40/0x8c
[ 48.834595] arm64_serror_panic+0x64/0x70
[ 48.834598] do_serror+0x3c/0x78
[ 48.834601] el1h_64_error_handler+0x34/0x4c
[ 48.834605] el1h_64_error+0x64/0x68
[ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5]
[ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5]
[ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common]
[ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common]
[ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2]
[ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem]
[ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem]
[ 48.834673] v4l_qbuf+0x48/0x5c [videodev]
[ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev]
[ 48.834725] video_usercopy+0x2ec/0x68c [videodev]
[ 48.834745] video_ioctl2+0x18/0x24 [videodev]
[ 48.834766] v4l2_ioctl+0x40/0x60 [videodev]
[ 48.834786] __arm64_sys_ioctl+0xa8/0xec
[ 48.834793] invoke_syscall+0x44/0x100
[ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0
[ 48.834804] do_el0_svc+0x1c/0x28
[ 48.834809] el0_svc+0x30/0xd0
[ 48.834813] el0t_64_sync_handler+0xc0/0xc4
[ 48.834816] el0t_64_sync+0x190/0x194
[ 48.834820] SMP: stopping secondary CPUs
[ 48.834831] Kernel Offset: disabled
[ 48.834833] CPU features: 0x08,00002002,80200000,4200421b
[ 48.834837] Memory Limit: none
[ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src
Trying to access link enc on a dpia link will cause a crash otherwise |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| In the Linux kernel, the following vulnerability has been resolved:
net: lapbether: handle NETDEV_PRE_TYPE_CHANGE
lapbeth_data_transmit() expects the underlying device type
to be ARPHRD_ETHER.
Returning NOTIFY_BAD from lapbeth_device_event() makes sure
bonding driver can not break this expectation. |
| A remote denial-of-service vulnerability exists in the ZTE Cloud PC client uSmartview, which may lead to memory corruption and remote denial of service. |
| Vulnerability on the external sharing feature in Cryptobox allows an attacker knowing a sharing link URL to retrieve information from the server allowing an offline brute-force attack of the access code associated to this sharing link. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, Thunderbird 140.10.1, and Firefox ESR 115.35.2. |
| Samsung Print Service Plugin for Android is potentially vulnerable to information disclosure when using an outdated version of the application via mobile devices. HP is releasing updates to mitigate these potential vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
