| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: explicitly disallow disconnect
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
Call Trace:
<TASK>
tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
sock_recvmsg_nosec net/socket.c:1023 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1045
__sys_recvfrom+0x202/0x380 net/socket.c:2237 |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix negative array index read
Avoid using the negative values
for clk_idex as an index into an array pptable->DpmDescriptor.
V2: fix clk_index return check (Tim Huang) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration
[Why]
Coverity reports Memory - illegal accesses.
[How]
Skip inactive planes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: axg-card: fix 'use-after-free'
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: heaps: Fix off-by-one in CMA heap fault handler
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX
[Why & How]
It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller
number to create array dmub_callback & dmub_thread_offload has potential to access
item out of array bound. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==============================================================
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==================================================================
[ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh]
[ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3
[ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479
[ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0
[ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024
[ 13.067860] Call Trace:
[ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 13.071486] <TASK>
[ 13.071492] dump_stack_lvl+0x5d/0x80
[ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002)
[ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.082199] print_report+0x174/0x505
[ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.097464] kasan_report+0xc8/0x150
[ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082]
[ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0
[ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b]
[ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.150446] ? __devm_add_action+0x167/0x1d0
[ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.161814] platform_probe+0xa2/0x150
[ 13.165029] really_probe+0x1e3/0x8a0
[ 13.168243] __driver_probe_device+0x18c/0x370
[ 13.171500] driver_probe_device+0x4a/0x120
[ 13.175000] __driver_attach+0x190/0x4a0
[ 13.178521] ? __pfx___driver_attach+0x10/0x10
[ 13.181771] bus_for_each_dev+0x106/0x180
[ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10
[ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10
[ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.194382] bus_add_driver+0x29e/0x4d0
[ 13.197328] driver_register+0x1a5/0x360
[ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.203362] do_one_initcall+0xa7/0x380
[ 13.206432] ? __pfx_do_one_initcall+0x10/0x10
[ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.213211] ? kasan_unpoison+0x44/0x70
[ 13.216688] do_init_module+0x238/0x750
[ 13.2196
---truncated--- |
| The ABI in the Linux kernel 2.6.28 and earlier on s390, powerpc, sparc64, and mips 64-bit platforms requires that a 32-bit argument in a 64-bit register was properly sign extended when sent from a user-mode application, but cannot verify this, which allows local users to cause a denial of service (crash) or possibly gain privileges via a crafted system call. |
| Array index error in arch/mips/kernel/scall64-o32.S in the Linux kernel before 2.6.28-rc8 on 64-bit MIPS platforms allows local users to cause a denial of service (system crash) via an o32 syscall with a small syscall number, which leads to an attempted read operation outside the bounds of the syscall table. |
| nsFrameManager in Firefox 3.x before 3.0.4, Firefox 2.x before 2.0.0.18, Thunderbird 2.x before 2.0.0.18, and SeaMonkey 1.x before 1.1.13 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by modifying properties of a file input element while it is still being initialized, then using the blur method to access uninitialized memory. |
| The _gnutls_x509_verify_certificate function in lib/x509/verify.c in libgnutls in GnuTLS before 2.6.1 trusts certificate chains in which the last certificate is an arbitrary trusted, self-signed certificate, which allows man-in-the-middle attackers to insert a spoofed certificate for any Distinguished Name (DN). |
| The hfsplus_block_allocate function in fs/hfsplus/bitmap.c in the Linux kernel before 2.6.28-rc1 does not check a certain return value from the read_mapping_page function before calling kmap, which allows attackers to cause a denial of service (system crash) via a crafted hfsplus filesystem image. |
| fs/splice.c in the splice subsystem in the Linux kernel before 2.6.22.2 does not properly handle a failure of the add_to_page_cache_lru function, and subsequently attempts to unlock a page that was not locked, which allows local users to cause a denial of service (kernel BUG and system crash), as demonstrated by the fio I/O tool. |
| PyDNS (aka python-dns) before 2.3.1-5 in Debian GNU/Linux does not use random source ports for DNS requests and does not use random transaction IDs for DNS retries, which makes it easier for remote attackers to spoof DNS responses, a different vulnerability than CVE-2008-1447. NOTE: this vulnerability exists because of an incomplete fix for CVE-2008-4099. |
| A certain Debian patch for OpenSSH before 4.3p2-9etch3 on etch; before 4.6p1-1 on sid and lenny; and on other distributions such as SUSE uses functions that are not async-signal-safe in the signal handler for login timeouts, which allows remote attackers to cause a denial of service (connection slot exhaustion) via multiple login attempts. NOTE: this issue exists because of an incorrect fix for CVE-2006-5051. |
| PyDNS (aka python-dns) before 2.3.1-4 in Debian GNU/Linux does not use random source ports or transaction IDs for DNS requests, which makes it easier for remote attackers to spoof DNS responses, a different vulnerability than CVE-2008-1447. |
