| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client do not properly parse commands, which allows local users to gain privileges via unspecified vectors, aka CSCsh30624. |
| The (1) TTLS CHAP, (2) TTLS MSCHAP, (3) TTLS MSCHAPv2, (4) TTLS PAP, (5) MD5, (6) GTC, (7) LEAP, (8) PEAP MSCHAPv2, (9) PEAP GTC, and (10) FAST authentication methods in Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client store transmitted authentication credentials in plaintext log files, which allows local users to obtain sensitive information by reading these files, aka CSCsg34423. |
| The command line interface (CLI) in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier allows local users to obtain privileges or cause a denial of service via unspecified vectors. NOTE: this issue can be leveraged remotely via CVE-2007-1063. |
| The Intrusion Prevention System (IPS) feature for Cisco IOS 12.4XE to 12.3T allows remote attackers to bypass IPS signatures that use regular expressions via fragmented packets. |
| The ATOMIC.TCP signature engine in the Intrusion Prevention System (IPS) feature for Cisco IOS 12.4XA, 12.3YA, 12.3T, and other trains allows remote attackers to cause a denial of service (IPS crash and traffic loss) via unspecified manipulations that are not properly handled by the regular expression feature, as demonstrated using the 3123.0 (Netbus Pro Traffic) signature. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets. |
| Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic. |
| Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.3), when set to log at the "debug" level, allows remote attackers to cause a denial of service (device reboot) by sending packets that are not of a particular protocol such as TCP or UDP, which triggers the reboot during generation of Syslog message 710006. |
| Cisco FWSM 3.x before 3.1(3.18), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a malformed HTTPS request. |
| Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request. |
| Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.11), when the HTTPS server is enabled, allows remote attackers to cause a denial of service (device reboot) via certain HTTPS traffic. |
| Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests. |
| Unspecified vulnerability in Cisco Firewall Services Module (FWSM) before 2.3(4.7) and 3.x before 3.1(3.1) causes the access control entries (ACE) in an ACL to be improperly evaluated, which allows remote authenticated users to bypass intended certain ACL protections. |
| Cisco IOS after 12.3(14)T, 12.3(8)YC1, 12.3(8)YG, and 12.4, with voice support and without Session Initiated Protocol (SIP) configured, allows remote attackers to cause a denial of service (crash) by sending a crafted packet to port 5060/UDP. |
| The Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.3 and Adaptive Security Device Manager (ASDM) before 5.2(2.54) do not validate the SSL/TLS certificates or SSH public keys when connecting to devices, which allows remote attackers to spoof those devices to obtain sensitive information or generate incorrect information. |
| Memory leak in the TCP listener in Cisco IOS 9.x, 10.x, 11.x, and 12.x allows remote attackers to cause a denial of service by sending crafted TCP traffic to an IPv4 address on the IOS device. |
| Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet. |
| The JTapi Gateway process in Cisco Unified Contact Center Enterprise, Unified Contact Center Hosted, IP Contact Center Enterprise, and Cisco IP Contact Center Hosted 5.0 through 7.1 allows remote attackers to cause a denial of service (repeated process restart) via a certain TCP session on the JTapi server port. |