| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabidHamster R4 v1.25 contains a stack-based buffer overflow vulnerability due to unsafe use of sprintf() when logging malformed HTTP requests. A remote attacker can exploit this flaw by sending a specially crafted URI, resulting in arbitrary code execution under the context of the web server process. |
| Improper input validation in IOMMU could allow a malicious hypervisor to reconfigure IOMMU registers resulting in loss of guest data integrity. |
| Buffer Overflow vulnerability in PyPXE v.1.8.4 allows a remote attacker to cause a denial of service via the handle function in the tftp module. |
| libarchive through 3.7.7 has a heap-based buffer over-read in header_gnu_longlink in archive_read_support_format_tar.c via a TAR archive because it mishandles truncation in the middle of a GNU long linkname. |
| A malformed packet can cause a buffer overflow in the APS layer of the Ember ZNet stack and lead to an assert |
| There is a buffer overflow vulnerability in the underlying Utility daemon that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
|
| Certain software builds for the BLU View 2 and Sharp Rouvo V Android devices contain a vulnerable pre-installed app with a package name of com.evenwell.fqc (versionCode='9020801', versionName='9.0208.01' ; versionCode='9020913', versionName='9.0209.13' ; versionCode='9021203', versionName='9.0212.03') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.evenwell.fqc app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user's apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1663816427:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1656476696:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1647856638:user/release-keys) and Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_460:user/release-keys and SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys). This malicious app starts an exported activity named com.evenwell.fqc/.activity.ClickTest, crashes the com.evenwell.fqc app by sending an empty Intent (i.e., having not extras) to the com.evenwell.fqc/.FQCBroadcastReceiver receiver component, and then it sends command arbitrary shell commands to the com.evenwell.fqc/.FQCService service component which executes them with "system" privileges. |
| An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE). |
| lua-shmem v1.0-1 was discovered to contain a buffer overflow via the shmem_write function. |
| Improper input validation in AMD Crash Defender could allow an attacker to provide the Windows® system process ID to a kernel-mode driver, resulting in an operating system crash, potentially leading to denial of service. |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. |
| A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x IP6 (All versions), Cerberus PRO EN Fire Panel FC72x IP7 (All versions), Cerberus PRO EN Fire Panel FC72x IP8 (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.3.5617), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions), Sinteso FS20 EN Fire Panel FC20 MP8 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems insufficiently validates HMAC values which might result in a buffer overread.
This could allow an unauthenticated remote attacker to crash the network service. |
| A vulnerability was discovered in DI_8200-16.07.26A1, There is a buffer overflow in the dbsrv_asp function; The strcpy function is executed without checking the length of the string, leading to a buffer overflow. |
| dataSIMS Avionics ARINC 664-1 version 4.5.3 contains a local buffer overflow vulnerability that allows attackers to overwrite memory by manipulating the milstd1553result.txt file. Attackers can craft a malicious file with carefully constructed payload and alignment sections to potentially execute arbitrary code on the Windows system. |
| Incorrect Access Control in GStreamer RTSP server 1.25.0 in gst-rtsp-server/rtsp-media.c allows remote attackers to cause a denial of service via a series of specially crafted hexstream requests. |
| Heap-based Buffer Overflow vulnerability in Samsung Open Source Escargot JavaScript engine allows Overflow Buffers.This issue affects Escargot: 4.0.0. |
| A CSV injection vulnerability in Taiga v6.8.1 allows attackers to execute arbitrary code via uploading a crafted CSV file. |
| Stack-based Buffer Overflow vulnerability in ZkTeco-based OEM devices allows, in some cases, the execution of arbitrary code. Due to the lack of protection mechanisms such as stack canaries and PIE, it is possible to successfully execute code even under restrictive conditions.
This issue affects
ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others)
with firmware
ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly others. |
| GNU objdump 2.43 is vulnerable to Buffer Overflow in the BFD (Binary File Descriptor) library's handling of tekhex format files. |
| A buffer overflow in the formSetCfm() function of Tenda AC1206 1200M 11ac US_AC1206V1.0RTL_V15.03.06.23_multi_TD01 allows attackers to cause a Denial of Service (DoS) via a crafted POST request. |
