| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Incorrect Privilege Assignment issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. A built-in user account has been granted a sensitive privilege that may allow a user to elevate to administrative privileges. |
| Firejail before 0.9.44.6 and 0.9.38.x LTS before 0.9.38.10 LTS does not comprehensively address dotfile cases during its attempt to prevent accessing user files with an euid of zero, which allows local users to conduct sandbox-escape attacks via vectors involving a symlink and the --private option. NOTE: this vulnerability exists because of an incomplete fix for CVE-2017-5180. |
| A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219. |
| A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853. |
| A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976. |
| An Improper Privilege Management issue was discovered in Cambium Networks ePMP. The privileges for SNMP community strings are not properly restricted, which may allow an attacker to gain access to sensitive information and possibly allow for configuration changes. |
| An error was found in the permission model used by X-Pack Alerting 5.0.0 to 5.6.0 whereby users mapped to certain built-in roles could create a watch that results in that user gaining elevated privileges. |
| In version 3.5 and prior of Cambium Networks ePMP firmware, the non-administrative users 'installer' and 'home' have the capability of changing passwords for other accounts, including admin, after disabling a client-side protection mechanism. |
| EMC Mainframe Enablers ResourcePak Base versions 7.6.0, 8.0.0, and 8.1.0 contains a fix for a privilege management vulnerability that could potentially be exploited by malicious users to compromise the affected system. |
| Foreman since version 1.5 is vulnerable to an incorrect authorization check due to which users with user management permission who are assigned to some organization(s) can do all operations granted by these permissions on all administrator user object outside of their scope, such as editing global admin accounts including changing their passwords. |
| An issue was discovered in OxygenOS before 4.1.0 on OnePlus 3 and 3T devices. The attacker can change the bootmode of the device by issuing the 'fastboot oem boot_mode {rf/wlan/ftm/normal} command' in contradiction to the threat model of Android where the bootloader MUST NOT allow any security-sensitive operation to be run unless the bootloader is unlocked. |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. |
| A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198. |
| A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| In Cloud Foundry cf-release versions prior to v264; UAA release all versions of UAA v2.x.x, 3.6.x versions prior to v3.6.13, 3.9.x versions prior to v3.9.15, 3.20.x versions prior to v3.20.0, and other versions prior to v4.4.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.17, 24.x versions prior to v24.12. 30.x versions prior to 30.5, and other versions prior to v41, zone administrators are allowed to escalate their privileges when mapping permissions for an external provider. |
| A Password in Configuration File issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The password in configuration file vulnerability could allow a malicious user to escalate privileges or assume the identity of another user and access sensitive information. |
| mediaserver in Android 4.0.3 through 5.x before 5.1 allows attackers to gain privileges. NOTE: This is a different vulnerability than CVE-2014-7920. |
| The Hyper Module Management (HMM) software of Huawei Tecal E9000 Chassis V100R001C00SPC160 and earlier versions allows the operator to modify the user configuration of iMana through privilege escalation. |
| The pre-install script in texlive 3.1.20140525_r34255.fc21 as packaged in Fedora 21 and rpm, and texlive 6.20131226_r32488.fc20 and rpm allows local users to delete arbitrary files via a crafted file in the user's home directory. |
| Thales nShield Connect hardware models 500, 1500, 6000, 500+, 1500+, and 6000+ before 11.72 allows physically proximate attackers to sign arbitrary data with previously loaded signing keys, extract the device identification key [KNETI] and impersonate the nShield Connect device on a network, affect the integrity and confidentiality of newly created keys, and potentially cause other unspecified impacts using previously loaded keys by connecting to the USB port on the front panel. |
