| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper validation in Power Management Firmware (PMFW) may allow an attacker with privileges to pass malformed workload arguments when exporting table data from SMU to DRAM potentially resulting in a loss of confidentiality and/or availability. |
| Improper verification of cryptographic signature in the Radeon RGB tool could allow a malicious file placed in the installation directory to be run with elevated privileges potentially leading to arbitrary code execution. |
| Out of bounds write in Fonts in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose internal Docker containers through the gw Docker instance. The gateway publishes a /meta endpoint which lists every micro‑service container together with version information. These containers are reachable directly over HTTP/HTTPS without any access‑control list (ACL), authentication or rate‑limiting. Consequently, any attacker on the LAN or the Internet can enumerate all internal services and their versions, interact with the exposed APIs of each microservice as an unauthenticated user, or issue malicious requests that may lead to information disclosure, privilege escalation within the container, or denial‑of‑service of the entire appliance. The root cause is the absence of authentication and network‑level restrictions on the API‑gateway’s proxy to internal Docker containers, effectively turning the internal service mesh into a public attack surface. This vulnerability has been identified by the vendor as: V-2024-030 — Exposed Internal Docker Instance (LAN). |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, jpeg2000input.cpp:395 computes buffer size as const int bufsize = w * h * ch * buffer_bpp using signed 32-bit arithmetic. When the product exceeds INT_MAX, the result wraps to 0 or a small value. m_buf.resize() allocates an undersized buffer, and subsequent pixel write loops cause heap overflow. Conditional on USE_OPENJPH build flag. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, softimageinput.cpp:469 (mixed RLE) and :345 (pure RLE) do not clamp the run length to remaining scanline width before writing pixels. The raw packet path (line 403) correctly clamps with std::min, but RLE paths skip this check. A crafted .pic file causes heap overflow up to 65535 bytes. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, sgiinput.cpp:265,274 use OIIO_DASSERT for bounds checking in the RLE decode loop. In release builds, OIIO_DASSERT compiles to ((void)sizeof(x)) (dassert.h:210), making all bounds checks no-ops. A crafted .sgi file with RLE count exceeding scanline width causes heap buffer overflow and crash. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| Rapid7 Metasploit Pro is vulnerable to a local privilege escalation attack that allows users to gain SYSTEM level control of a Windows host. Upon startup the metasploitPostgreSQL service the subsequent postgres.exe service attempts to load an OpenSSL configuration file from a non-existent directory that is writable by standard users. By planting a crafted openssl.cnf file an attacker can trick the high-privilege service into executing arbitrary commands. This effectively permits an unprivileged user to bypass security controls and achieve a full host compromise under the agent's SYSTEM level access. |
| A race condition in the MxGPU-Virtualization driver’s ioctl path caused by concurrent unsynchronized access to the global variable amdgv_cmd in an unlocked ioctl handler could be exploited by an attacker to trigger a heap-based buffer overflow, potentially resulting in denial-of-service within the vulnerable system context. |
| An out of bounds read in the remote management firmware could allow a privileged attacker read a limited section of memory outside of established bounds potentially resulting in loss of confidentiality or availability. |
| Unrestricted IP address binding in the AMD Device Metrics Exporter (ROCm ecosystem) could allow a remote attacker to perform unauthorized changes to the GPU configuration, potentially resulting in loss of availability |
| Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation. |
| The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'table' parameter in all versions up to, and including, 9.1.12 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.843 and Application prior to 20.0.1923 (VA and SaaS deployments) contains dangerous PHP dead code present in multiple Docker-hosted PHP instances. A script named /var/www/app/resetroot.php (found in several containers) lacks authentication checks and, when executed, performs a SQL update that sets the database administrator username to 'root' and its password hash to the SHA-512 hash of the string 'password'. Separately, commented-out code in /var/www/app/lib/common/oses.php would unserialize session data (unserialize($_SESSION['osdata']))—a pattern that can enable remote code execution if re-enabled or reached with attacker-controlled serialized data. An attacker able to reach the resetroot.php endpoint can trivially reset the MySQL root password and obtain full database control; combined with deserialization issues this can lead to full remote code execution and system compromise. This vulnerability has been identified by the vendor as: V-2023-003 — Dead / Insecure PHP Code. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.843 and Application prior to 20.0.1923 (macOS/Linux client deployments) contain an arbitrary file write vulnerability via the response file handling. When tasks produce output the service writes response data into files under /opt/PrinterInstallerClient/tmp/responses/ reusing the requested filename. The service follows symbolic links in the responses directory and writes as the service user (typically root), allowing a local, unprivileged user to cause the service to overwrite or create arbitrary files on the filesystem as root. This can be used to modify configuration files, replace or inject binaries or drivers, and otherwise achieve local privilege escalation and full system compromise. This vulnerability has been identified by the vendor as: V-2023-019 — Arbitrary File Write as Root. |
| Cross-site scripting vulnerability exists in Musetheque V4 Information Disclosure for IPKNOWLEDGE V4L1 rev2203.0 and earlier. If a file containing malicious contents is uploaded, an arbitrary script may be executed on a user's web browser when viewing the administration page showing the information of the file. |
| Cross-site request forgery vulnerability exists in Musetheque V4 Information Disclosure for IPKNOWLEDGE V4L1 rev2203.0 and earlier. If a user views a malicious page while logged-in to the affected product, unexpected operations may be done. |
| Improper input validation in Delphix Continuous Data connectors allows an authenticated user to execute arbitrary operating system commands on the staging or target host. |
| SzafirHost verifies the signature of the downloaded JAR file using class JarInputStream (reading from the beginning of the file), but loads classes using class JarFile/URLClassLoader (reading the Central Directory from the end). It can lead to remote code execution by allowing an attacker to combine a genuine, signed JAR file with a malicious ZIP file, causing the verification to pass but the malicious class to be loaded.
This issue was fixed in version 1.2.1. |
