| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during later parameter handling (e.g. STATE_COOKIE
processing and kmemdup() copies).
Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT
chunk length does not exceed the available data in the COOKIE_ECHO
buffer before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
VFS: fix possible failure to unlock in nfsd4_create_file()
atomic_create() in fs/namei.c drops the reference to the dentry
when it returns an error.
This behaviour was imported into dentry_create() so that it
will drop the reference if an error is returned from atomic_create(),
though not if vfs_create() returns an error (in the case where
->atomic_create is not supported).
The caller - nfsd4_create_file() - is made aware of this by checking
path->dentry, which will either be a counted reference to a dentry, or
an error pointer.
However the change to use start_creating()/end_creating() (which landed
shortly before the dentry_create() change landed, though was likely
developed around the same time) means that nfsd4_create_file() *needs* a
valid dentry so that it can unlock the parent.
The net result is that if NFSD exports a filesystem which uses
->atomic_create, and if a call to ->atomic_create returns an error, then
nfsd4_create_file() will pass an error pointer to end_creating()
and the parent will not be unlocked.
Fix this by changing dentry_create() to make sure path->dentry is always
a valid dentry, never an error-pointer. The actual error is already
returned a different way.
Note that if ->atomic_create() returns a different dentry (which may not
be possible in practice) we are guaranteed (because it is only ever
provided by d_spliace_alias()) that it will have the same d_parent and
so it will have the same effect when passed to end_creating(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
__input_process_payload() stores first_skb into xtfs->ra_newskb under
drop_lock when starting partial reassembly, then unlocks and breaks out
of the processing loop. The post-loop check reads xtfs->ra_newskb
without the lock to decide whether first_skb is still owned:
if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb)
Between spin_unlock and this read, a concurrent CPU running
iptfs_reassem_cont() (or the drop_timer hrtimer) can complete
reassembly, NULL xtfs->ra_newskb, and free the skb. The check then
evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb
operate on the freed skb — a use-after-free in skbuff_head_cache.
Replace the unlocked read with a local bool that records whether
first_skb was handed to the reassembly state in the current call. The
flag is set after the existing spin_unlock, before the break, using the
pointer equality that is stable at that point (first_skb == skb iff
first_skb was stored in ra_newskb). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: sync RX data at the hardware packet offset
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware. |
