| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| The issue was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing maliciously crafted web content may prevent Content Security Policy from being enforced. |
| Remote Code Execution Vulnerability in Hitachi Storage Navigator and the maintenance console in Hitachi Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28.
This issue affects Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28 : before DKCMAIN Ver. 88-08-16-xx/00, SVP Ver. 88-08-18-xx/00, before DKCMAIN Ver. 93-07-26-xx/00, SVP Ver. 93-07-26-xx/00, before DKCMAIN Ver. A3-04-02-xx/00, MPC Ver. A3-04-02-xx/00, before DKCMAIN Ver. A3-03-41-xx/00, MPC Ver. A3-03-41-xx/00, before DKCMAIN Ver. A3-03-03-xx/00, MPC Ver. A3-03-03-xx/00. |
| libcurl might in some circumstances reuse the wrong connection for SMB(S)
transfers.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a network transfer operation that was requested by an
application could wrongfully reuse an existing SMB connection to the same
server that was using a different 'share' than the new subsequent transfer
should.
This could in unlucky situations lead to the download of the wrong file or the
upload of a file to the wrong place. When this happens, the same credentials
are used and the server name is the same. |
| A logging issue was addressed with improved data redaction. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. An app may be able to determine kernel memory layout. |
| This issue was addressed with additional entitlement checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4. An app may be able to circumvent App Privacy Report logging. |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 150.0.3. |
| A vulnerability in a network management service of AOS-8 Operating System could allow an unauthenticated remote attacker to exploit this vulnerability by sending specially crafted network packets to the affected device, potentially resulting in a denial-of-service condition. Successful exploitation could cause the affected service process to terminate unexpectedly, disrupting normal device operations. |
| Next.js is a React framework for building full-stack web applications. From 12.2.0 to before 15.5.16 and 16.2.5, Applications using the Pages Router with i18n configured and middleware/proxy-based authorization can allow unauthorized access to protected page data through locale-less /_next/data/<buildId>/<page>.json requests. In affected configurations, middleware does not run for the unprefixed data route, allowing an attacker to retrieve SSR JSON for protected pages without passing the intended authorization checks. This vulnerability is fixed in 15.5.16 and 16.2.5. |
| When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Grav is a file-based Web platform. Prior to 2.0.0-rc.2, the Twig sandbox allow-list permits any user with the admin.pages role to call config.toArray() from within a page body, dumping the entire merged site configuration — including all plugin secrets (SMTP passwords, AWS keys, OAuth client secrets, API tokens) — into the rendered HTML. No administrator privileges are required. This vulnerability is fixed in 2.0.0-rc.2. |
| A heap-based buffer overflow vulnerability exists in a Network management service of AOS-8 and AOS-10 that could allow an unauthenticated remote attacker to achieve remote code execution. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code as a privileged user on the underlying operating system, potentially leading to a system compromise. Exploitation may also result in a denial-of-service (DoS) condition affecting the impacted system process. |
| Command injection vulnerabilities exist in the command line interface (CLI) service accessed by the PAPI protocol of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| Loop with unreachable exit condition ('infinite loop') in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. |
| Joomla com_fabrik 3.9.11 contains a directory traversal vulnerability that allows unauthenticated attackers to list arbitrary files by manipulating the folder parameter. Attackers can send GET requests to the onAjax_files method with path traversal sequences to enumerate files in system directories outside the intended web root. |
| A parsing issue in the handling of directory paths was addressed with improved path validation. This issue is fixed in macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5. An app may be able to gain root privileges. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.5. An app may be able to access protected user data. |
| The superduper project thru v0.10.0 contains a critical remote code execution vulnerability in its query parsing component. The _parse_op_part() function in query.py uses the unsafe eval() function to dynamically evaluate user-supplied query operands without proper sanitization or restriction. Although the function attempts to limit the execution context by providing a restricted global namespace, it does not block access to dangerous built-in functions. A remote attacker can exploit this by submitting a specially crafted query string containing Python code that imports modules (e.g., os) and executes arbitrary system commands, leading to complete compromise of the server. |
