| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-net: fix OOB access in ULE extension header tables
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally. |
| An out-of-bounds read in the read_global_param() function (libavcodec/av1dec.c) of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A possible security vulnerability has been identified in Apache Kafka.
By default, the broker property `sasl.oauthbearer.jwt.validator.class` is set to `org.apache.kafka.common.security.oauthbearer.DefaultJwtValidator`. It accepts any JWT token without validating its signature, issuer, or audience. An attacker can generate a JWT token from any issuer with the `preferred_username` set to any user, and the broker will accept it.
We advise the Kafka users using kafka v4.1.0 or v4.1.1 to set the config `sasl.oauthbearer.jwt.validator.class` to `org.apache.kafka.common.security.oauthbearer.BrokerJwtValidator` explicitly to avoid this vulnerability. Since Kafka v4.1.2 and v4.2.0 and later, the issue is fixed and will correctly validate the JWT token. |
| The 'zipfile' module would not check the validity of the ZIP64 End of
Central Directory (EOCD) Locator record offset value would not be used to
locate the ZIP64 EOCD record, instead the ZIP64 EOCD record would be
assumed to be the previous record in the ZIP archive. This could be abused
to create ZIP archives that are handled differently by the 'zipfile' module
compared to other ZIP implementations.
Remediation maintains this behavior, but checks that the offset specified
in the ZIP64 EOCD Locator record matches the expected value. |
| A maliciously crafted TIFF file can cause image decoding to attempt to allocate up 4GiB of memory, causing either excessive resource consumption or an out-of-memory error. |
| The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.22.0, The URBDRC client uses server-supplied interface numbers as array indices without bounds checks, causing an out-of-bounds read in libusb_udev_select_interface. This vulnerability is fixed in 3.22.0. |
| jsPDF is a library to generate PDFs in JavaScript. Prior to 4.1.0, user control of the first argument of the addImage method results in denial of service. If given the possibility to pass unsanitized image data or URLs to the addImage method, a user can provide a harmful BMP file that results in out of memory errors and denial of service. Harmful BMP files have large width and/or height entries in their headers, which lead to excessive memory allocation. The html method is also affected. The vulnerability has been fixed in jsPDF@4.1.0. |
| cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates. In versions from 1.18.0 to before 1.18.5 and from 1.19.0 to before 1.19.3, the cert-manager-controller performs DNS lookups during ACME DNS-01 processing (for zone discovery and propagation self-checks). By default, these lookups use standard unencrypted DNS. An attacker who can intercept and modify DNS traffic from the cert-manager-controller pod can insert a crafted entry into cert-manager's DNS cache. Accessing this entry will trigger a panic, resulting in denial‑of‑service (DoS) of the cert-manager controller. The issue can also be exploited if the authoritative DNS server for the domain being validated is controlled by a malicious actor. This issue has been patched in versions 1.18.5 and 1.19.3. |
