| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01753620; Issue ID: MSV-6100. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| Crash in sharkd 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| Assertion failure vulnerability in the PCO (Protocol Configuration Options) parser in the SMF (Session Management Function) component of Open5GS before v2.7.5 allows remote attackers to cause denial of service via specially crafted NGAP messages containing malformed length fields in protocol configuration data. |
| An issue in Assimp v.6.0.2 allows a remote attacker to cause a denial of service via the FBXMeshGeometry.cpp, MeshGeometry::MeshGeometry() |
| RTSP protocol dissector crash in Wireshark 4.6.0 to 4.6.4 |
| BT-DHT protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| HTTP protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4. |
| ZigBee protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
[ rjw: Subject tweak ] |
| Nimiq's network-libp2p is a Nimiq network implementation based on libp2p. Prior to version 1.3.0, `network-libp2p` discovery uses a libp2p `ConnectionHandler` state machine. the handler assumes there is at most one inbound and one outbound discovery substream per connection. if a remote peer opens/negotiate the discovery protocol substream a second time on the same connection, the handler hits a `panic!(\"Inbound already connected\")` / `panic!(\"Outbound already connected\")` path instead of failing closed. This causes a remote crash of the networking task (swarm), taking the node's p2p networking offline until restart. The patch for this vulnerability is formally released as part of v1.3.0. No known workarounds are available. |
| nimiq-blockchain provides persistent block storage for Nimiq's Rust implementation. Prior to version 1.3.0, `HistoryStore::put_historic_txns` uses an `assert!` to enforce invariants about `HistoricTransaction.block_number` (must be within the macro block being pushed and within the same epoch). During history sync, a peer can influence the `history: &[HistoricTransaction]` input passed into `Blockchain::push_history_sync`, and a malformed history list can violate these invariants and trigger a panic. `extend_history_sync` calls `this.history_store.add_to_history(..)` before comparing the computed history root against the macro block header (`block.history_root()`), so the panic can happen before later rejection checks run. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| nimiq-transaction provides the transaction primitive to be used in Nimiq's Rust implementation. Prior to version 1.3.0, `HistoryTreeProof::verify` panics on a malformed proof where `history.len() != positions.len()` due to `assert_eq!(history.len(), positions.len())`. The proof object is derived from untrusted p2p responses (`ResponseTransactionsProof.proof`) and is therefore attacker-controlled at the network boundary until validated. A malicious peer could trigger a crash by returning a crafted inclusion proof with a length mismatch. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| In systemd 258 before 260, a local unprivileged user can trigger an assert when a Delegate=yes and User=<unset> unit exists and is running. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.17.2 and 1.16.4, an unchecked type assertion in the `forEach` mutation handler allows any user with permission to create a `Policy` or `ClusterPolicy` to crash the cluster-wide background controller into a persistent CrashLoopBackOff. The same bug also causes the admission controller to drop connections and block all matching resource operations. The crash loop persists until the policy is deleted. The vulnerability is confined to the legacy engine, and CEL-based policies are unaffected. Versions 1.17.2 and 1.16.4 fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: replace overzealous BUG_ON in osdmap_apply_incremental()
If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG. Instead, just declare the incremental osdmap to be invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock()
Even though we check that we "should" be able to do lc_get_cumulative()
while holding the device->al_lock spinlock, it may still fail,
if some other code path decided to do lc_try_lock() with bad timing.
If that happened, we logged "LOGIC BUG for enr=...",
but still did not return an error.
The rest of the code now assumed that this request has references
for the relevant activity log extents.
The implcations are that during an active resync, mutual exclusivity of
resync versus application IO is not guaranteed. And a potential crash
at this point may not realizs that these extents could have been target
of in-flight IO and would need to be resynced just in case.
Also, once the request completes, it will give up activity log references it
does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put().
Fix:
Do not crash the kernel for a condition that is harmless during normal
operation: also catch "e->refcnt == 0", not only "e == NULL"
when being noisy about "al_complete_io() called on inactive extent %u\n".
And do not try to be smart and "guess" whether something will work, then
be surprised when it does not.
Deal with the fact that it may or may not work. If it does not, remember a
possible "partially in activity log" state (only possible for requests that
cross extent boundaries), and return an error code from
drbd_al_begin_io_nonblock().
A latter call for the same request will then resume from where we left off. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. In versions 1.2.2 and below, an unauthenticated p2p peer can cause the RequestMacroChain message handler task to panic. Sending a RequestMacroChain message where the first locator hash on the victim’s main chain is a micro block hash (not a macro block hash) causes said panic. The RequestMacroChain::handle handler selects the locator based only on "is on main chain", then calls get_macro_blocks() and panics via .unwrap() when the selected hash is not a macro block (BlockchainError::BlockIsNotMacro). This issue has been fixed in version 1.3.0. |
