| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: Fix potential block overflow that cause system hang
When a user executes the FITRIM command, an underflow can occur when
calculating nblocks if end_block is too small. Since nblocks is of
type sector_t, which is u64, a negative nblocks value will become a
very large positive integer. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time to
process the bio chain, and the ns_segctor_sem lock remains held for a
long period. This prevents other tasks from acquiring the ns_segctor_sem
lock, resulting in the hang reported by syzbot in [1].
If the ending block is too small, typically if it is smaller than 4KiB
range, depending on the usage of the segment 0, it may be possible to
attempt a discard request beyond the device size causing the hang.
Exiting successfully and assign the discarded size (0 in this case)
to range->len.
Although the start and len values in the user input range are too small,
a conservative strategy is adopted here to safely ignore them, which is
equivalent to a no-op; it will not perform any trimming and will not
throw an error.
[1]
task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000
Call Trace:
rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272
nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline]
nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684
[ryusuke: corrected part of the commit message about the consequences] |
| FFmpeg before 8.1 has an integer overflow and resultant out-of-bounds write via CENC (Common Encryption) subsample data to libavformat/mov.c. |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. |
| A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition. |
| An integer overflow was present in `OrderedHashTable` used by the JavaScript engine. This vulnerability was fixed in Firefox 139.0.4. |
| Integer overflow in the SVG component. This vulnerability was fixed in Firefox 143, Firefox ESR 115.28, Firefox ESR 140.3, Thunderbird 143, and Thunderbird 140.3. |
| Sandbox escape due to integer overflow in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 143.0.3. |
| WARNING:
Users of 6.x should upgrade to 6.2.4 or later as the fix was missed in previous 6.x releases.
See the following for more details:
https://activemq.apache.org/security-advisories.data/CVE-2026-40046-announcement.txt
https://www.cve.org/CVERecord?id=CVE-2026-40046
Original Report:
Apache ActiveMQ does not properly validate the remaining length field which may lead to an overflow during the decoding of malformed packets. When this integer overflow occurs, ActiveMQ may incorrectly compute the total Remaining Length and subsequently misinterpret the payload as multiple MQTT control packets which makes the broker susceptible to unexpected behavior when interacting with non-compliant clients. This behavior violates the MQTT v3.1.1 specification, which restricts Remaining Length to a maximum of 4 bytes. The scenario occurs on established connections after the authentication process. Brokers that are not enabling mqtt transport connectors are not impacted.
This issue affects Apache ActiveMQ: before 5.19.2, 6.0.0 to 6.1.8, and 6.2.0
Users are recommended to upgrade to version 5.19.2, 6.1.9, or 6.2.1, which fixes the issue. |
| There exists a vulnerability in SQLite versions before 3.50.2 where the number of aggregate terms could exceed the number of columns available. This could lead to a memory corruption issue. We recommend upgrading to version 3.50.2 or above. |
| Integer overflow or wraparound in Windows Projected File System allows an authorized attacker to elevate privileges locally. |
| eprosima Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Prior to 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS.
If the fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length field in readBinaryPropertySeq— are modified, an integer overflow occurs, leading to an OOM during the resize operation. This vulnerability is fixed in 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1. |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. |
| Integer underflow (wrap or wraparound) in Windows Hyper-V allows an authorized attacker to deny service over a network. |
| A flaw was identified in the X.Org X server’s X Keyboard (Xkb) extension where improper bounds checking in the XkbSetCompatMap() function can cause an unsigned short overflow. If an attacker sends specially crafted input data, the value calculation may overflow, leading to memory corruption or a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: add seqadj extension for natted connections
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1.1 and below are prone to have Undefined Behavior (UB) and Out of Memory errors. This issue is fixed in version 2.3.1.2. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. A vulnerability present in versions prior to 2.3.1.2 affects users of the iccDEV library who process ICC color profiles. It results in heap buffer overflow in `CIccTagLut16::Validate()`. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| SumatraPDF is a multi-format reader for Windows. All versions contain an off-by-one error in the validation code that only triggers with exactly 2 records, causing an integer underflow in the size calculation. This bug exists in PalmDbReader::GetRecord when opening a crafted Mobi file, resulting in an out-of-bounds heap read that crashes the app. There are no published fixes at the time of publication. |
| Integer Overflow or Wraparound vulnerability in MuntashirAkon AppManager (app/src/main/java/org/apache/commons/compress/archivers/tar modules). This vulnerability is associated with program files TarUtils.Java.
This issue affects AppManager: before 4.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
