| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| A vulnerability has been found in code-projects Project Management System 1.0. This vulnerability affects unknown code of the file /mail.php of the component Mail Compose Page. Such manipulation leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| A flaw has been found in antlr ANTLR4 up to 4.13.2. This affects the function ObjectInputStream.readObject of the file antlr4-maven-plugin/src/main/java/org/antlr/mojo/antlr4/GrammarDependencies.java of the component Maven Plugin. This manipulation causes time-of-check time-of-use. The attack is restricted to local execution. A high degree of complexity is needed for the attack. It is indicated that the exploitability is difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject oversized EMA RNR lists
nl80211_parse_rnr_elems() stores the parsed element count in a
u8-backed cfg80211_rnr_elems::cnt field and uses that count to size
the flexible array allocation.
Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches
255, before incrementing it again. This keeps the parser aligned with
the data structure it fills and matches the existing bound check used
by nl80211_parse_mbssid_elems(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix potential unbounded skb queue
virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc.
virtio_transport_recv_enqueue() skips coalescing for packets
with VIRTIO_VSOCK_SEQ_EOM.
If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM,
a very large number of packets can be queued
because vvs->rx_bytes stays at 0.
Fix this by estimating the skb metadata size:
(Number of skbs in the queue) * SKB_TRUESIZE(0) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during later parameter handling (e.g. STATE_COOKIE
processing and kmemdup() copies).
Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT
chunk length does not exceed the available data in the COOKIE_ECHO
buffer before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: check allocation under invalidate lock
commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START
omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE),
but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440).
Later, omfs_make_empty() uses
sbi->s_sys_blocksize - OMFS_DIR_START
as the length argument to memset(). Since s_sys_blocksize is u32,
a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes
an unsigned underflow there, wrapping to a value near 2^32. That drives
a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel
memory far beyond the backing block buffer.
Add the corresponding lower-bound check alongside the existing upper-bound
check in omfs_fill_super(), so that malformed images are rejected during
superblock validation before any filesystem data is processed. |
| A vulnerability was identified in yashpokharna2555 restaurent-management-system. This affects an unknown function of the file /forgotpassword.php of the component POST Parameter Handler. Such manipulation of the argument email leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
