| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
debugfs: fix wait/cancellation handling during remove
Ben Greear further reports deadlocks during concurrent debugfs
remove while files are being accessed, even though the code in
question now uses debugfs cancellations. Turns out that despite
all the review on the locking, we missed completely that the
logic is wrong: if the refcount hits zero we can finish (and
need not wait for the completion), but if it doesn't we have
to trigger all the cancellations. As written, we can _never_
get into the loop triggering the cancellations. Fix this, and
explain it better while at it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Defer work in bpf_timer_cancel_and_free
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
There is a comment in qdisc_create() about us not calling ops->reset()
in some cases.
err_out4:
/*
* Any broken qdiscs that would require a ops->reset() here?
* The qdisc was never in action so it shouldn't be necessary.
*/
As taprio sets a timer before actually receiving a packet, we need
to cancel it from ops->destroy, just in case ops->reset has not
been called.
syzbot reported:
ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22
WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000130f330 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020
R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000
FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__debug_check_no_obj_freed lib/debugobjects.c:987 [inline]
debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018
slab_free_hook mm/slub.c:1603 [inline]
slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653
slab_free mm/slub.c:3213 [inline]
kfree+0xe4/0x540 mm/slub.c:4267
qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299
tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2403
___sys_sendmsg+0xf3/0x170 net/socket.c:2457
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 |
| In the Linux kernel, the following vulnerability has been resolved:
stackdepot: fix stack_depot_save_flags() in NMI context
Per documentation, stack_depot_save_flags() was meant to be usable from
NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still
would try to take the pool_lock in an attempt to save a stack trace in the
current pool (if space is available).
This could result in deadlock if an NMI is handled while pool_lock is
already held. To avoid deadlock, only try to take the lock in NMI context
and give up if unsuccessful.
The documentation is fixed to clearly convey this. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tailcall infinite loop caused by freplace
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix possible stall on recvmsg()
recvmsg() can enter an infinite loop if the caller provides the
MSG_WAITALL, the data present in the receive queue is not sufficient to
fulfill the request, and no more data is received by the peer.
When the above happens, mptcp_wait_data() will always return with
no wait, as the MPTCP_DATA_READY flag checked by such function is
set and never cleared in such code path.
Leveraging the above syzbot was able to trigger an RCU stall:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1
(t=10500 jiffies g=13089 q=109)
rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
context_switch kernel/sched/core.c:4955 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6236
schedule+0xd3/0x270 kernel/sched/core.c:6315
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189
Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00
RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283
RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870
RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877
R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000
R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000
FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline]
mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016
release_sock+0xb4/0x1b0 net/core/sock.c:3204
mptcp_wait_data net/mptcp/protocol.c:1770 [inline]
mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080
inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659
sock_recvmsg_nosec net/socket.c:944 [inline]
____sys_recvmsg+0x527/0x600 net/socket.c:2626
___sys_recvmsg+0x127/0x200 net/socket.c:2670
do_recvmmsg+0x24d/0x6d0 net/socket.c:2764
__sys_recvmmsg net/socket.c:2843 [inline]
__do_sys_recvmmsg net/socket.c:2866 [inline]
__se_sys_recvmmsg net/socket.c:2859 [inline]
__x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc200d2
---truncated--- |
| copyparty, a portable file server, has a DOM-based cross-site scripting vulnerability in versions prior to 1.16.15. The vulnerability is considered low-risk. By handing someone a maliciously-named file, and then tricking them into dragging the file into copyparty's Web-UI, an attacker could execute arbitrary javascript with the same privileges as that user. For example, this could give unintended read-access to files owned by that user. The bug is triggered by the drag-drop action itself; it is not necessary to actually initiate the upload. The file must be empty (zero bytes). Note that, as a general-purpose webserver, it is intentionally possible to upload HTML-files with arbitrary javascript in `<script>` tags, which will execute when the file is opened. The difference is that this vulnerability would trigger execution of javascript during the act of uploading, and not when the uploaded file was opened. Version 1.16.15 contains a fix. |
| Copyparty is a portable file server. Versions prior to 1.18.9, the filter parameter for the "Recent Uploads" page allows arbitrary RegExes. If this feature is enabled (which is the default), an attacker can craft a filter which deadlocks the server. This is fixed in version 1.18.9. |
| hutool-core v5.8.23 was discovered to contain an infinite loop in the StrSplitter.splitByRegex function. This vulnerability allows attackers to cause a Denial of Service (DoS) via manipulation of the first two parameters. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made. |
| A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.15), Teamcenter V13.0 (All versions < V13.0.0.10), Teamcenter V13.1 (All versions < V13.1.0.10), Teamcenter V13.2 (All versions < V13.2.0.9), Teamcenter V13.3 (All versions < V13.3.0.5), Teamcenter V14.0 (All versions < V14.0.0.2). File Server Cache service in Teamcenter is vulnerable to denial of service by entering infinite loops and using up CPU cycles. This could allow an attacker to cause denial of service condition. |
| GeoServer is an open source server that allows users to share and edit geospatial data. Malicious Jiffle scripts can be executed by GeoServer, either as a rendering transformation in WMS dynamic styles or as a WPS process, that can enter an infinite loop to trigger denial of service. This vulnerability is fixed in 2.27.0, 2.26.3, and 2.25.7. This vulnerability can be mitigated by disabling WMS dynamic styling and the Jiffle process. |
| Deadlock in PAM automatic check-in feature in Devolutions Server allows a password to remain valid beyond the end of its intended check-out period due to a deadlock occurring in the scheduling service.This issue affects the following version(s) :
*
Devolutions Server 2025.2.2.0 through 2025.2.5.0
* Devolutions Server 2025.1.12.0 and earlier |
| Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers.
An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5. |
| OctoPrint versions up until and including 1.11.1 contain a vulnerability that allows any unauthenticated attacker to send a manipulated broken multipart/form-data request to OctoPrint and through that make the web server component become unresponsive. The issue can be triggered by a broken multipart/form-data request lacking an end boundary to any of OctoPrint's endpoints implemented through the octoprint.server.util.tornado.UploadStorageFallbackHandler request handler. The request handler will get stuck in an endless busy loop, looking for a part of the request that will never come. As Tornado is single-threaded, that will effectively block the whole web server. The vulnerability has been patched in version 1.11.2. |
| Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header. |
| An issue has been discovered in GitLab CE/EE affecting all versions from 17.7 before 17.10.8, 17.11 before 17.11.4, and 18.0 before 18.0.2, allow an attacker to trigger an infinite redirect loop, potentially leading to a denial of service condition. |
| Silicon Labs Gecko OS DNS Response Processing Infinite Loop Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the processing of DNS responses. The issue results from a logic error that can lead to an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-23392. |
| 7-Zip CopyCoder Infinite Loop Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of 7-Zip. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the processing of streams. The issue results from a logic error that can lead to an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-24307. |
| The sequoia-openpgp crate 1.13.0 before 1.21.0 for Rust allows an infinite loop of "Reading a cert: Invalid operation: Not a Key packet" messages for RawCertParser operations that encounter an unsupported primary key type. |
