| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server.
If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer.
This issue affects Apache HTTP Server: through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the response
buffer and expose adjacent kernel heap to userspace.
Guard the QUERY_INFO copy with a bounds check on the actual Buffer
payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length)
rather than an open-coded addition so the guard cannot overflow on
32-bit builds. |
| A security vulnerability has been detected in TRENDnet TEW-821DAP 1.12B01. Impacted is the function auto_update_firmware of the component Firmware Udpate. The manipulation of the argument str leads to buffer overflow. The attack may be initiated remotely. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| An authorization flaw in the user management command could allow an authenticated user to make limited changes to authentication-related data associated with another user account. This could affect how authentication is performed for the impacted account. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| A type confusion vulnerability in Qt SVG allows an attacker to cause an application crash via a crafted SVG image.
When processing SVG marker references, the renderer retrieves a node by its id attribute and casts it to QSvgMarker* without verifying the node type. A non-marker element (such as a <line> element) that references itself as a marker triggers an out-of-bounds heap read due to the object size difference between QSvgLine and QSvgMarker,
followed by an endless recursion that bypasses the marker recursion
guard through incorrect virtual dispatch. The result is an application
crash (denial of service).
This issue affects Qt SVG:
from 6.7.0 before 6.8.8, from 6.9.0 before 6.11.1. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject oversized dirents in page cache
fuse_add_dirent_to_cache() computes a serialized dirent size from the
server-controlled namelen field and copies the dirent into a single
page-cache page. The existing logic only checks whether the dirent fits
in the remaining space of the current page and advances to a fresh page
if not. It never checks whether the dirent itself exceeds PAGE_SIZE.
As a result, a malicious FUSE server can return a dirent with
namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB
page systems this causes memcpy() to overflow the cache page by 24 bytes
into the following kernel page.
Reject dirents that cannot fit in a single page before copying them into
the readdir cache. |
| Transient DOS when processing target power rate tables during channel configuration. |
| Transient DOS when processing a malformed Fast Transition response frame with an invalid header structure during wireless roaming. |
| Memory corruption when dynamically changing the size of a previously allocated buffer while its contents are being modified. |
| Information Disclosure while processing IOCTL handler callbacks without verifying buffer size. |
| A vulnerability was identified in D-Link DI-8100 16.07.26A1. This affects the function sprintf of the file yyxz.asp. The manipulation of the argument ID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. |
| A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability has been found in D-Link DI-8100 16.07.26A1. This vulnerability affects the function sprintf of the file /user_group.asp of the component CGI Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Redis is an in-memory data structure store. In versions of redis-server up to 8.6.3, the RESTORE command does not properly validate serialized values. An authenticated attacker with permission to execute RESTORE can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This is patched in version 8.6.3. |
