| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Fickling is a Python pickling decompiler and static analyzer. Fickling versions up to and including 0.1.6 do not treat Python’s runpy module as unsafe. Because of this, a malicious pickle that uses runpy.run_path() or runpy.run_module() is classified as SUSPICIOUS instead of OVERTLY_MALICIOUS. If a user relies on Fickling’s output to decide whether a pickle is safe to deserialize, this misclassification can lead them to execute attacker-controlled code on their system. This affects any workflow or product that uses Fickling as a security gate for pickle deserialization. This issue has been patched in version 0.1.7. |
| Fickling is a Python pickling decompiler and static analyzer. Prior to version 0.1.7, both ctypes and pydoc modules aren't explicitly blocked. Even other existing pickle scanning tools (like picklescan) do not block pydoc.locate. Chaining these two together can achieve RCE while the scanner still reports the file as LIKELY_SAFE. This issue has been patched in version 0.1.7. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, IP Restriction Middleware in Hono is vulnerable to an IP address validation bypass. The `IPV4_REGEX` pattern and `convertIPv4ToBinary` function in `src/utils/ipaddr.ts` do not properly validate that IPv4 octet values are within the valid range of 0-255, allowing attackers to craft malformed IP addresses that bypass IP-based access controls. Version 4.11.7 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member. |
| Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to 2.20.0, in litestar.middleware.allowed_hosts, allowlist entries are compiled into regex patterns in a way that allows regex metacharacters to retain special meaning (e.g., . matches any character). This enables a bypass where an attacker supplies a host that matches the regex but is not the intended literal hostname. This vulnerability is fixed in 2.20.0. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.2.11, there is a flaw in the path sanitization logic allows an authenticated attacker with administrative privileges to bypass directory traversal protections. By using nested traversal sequences (e.g., ....//), an attacker can write arbitrary files to the server filesystem, including sensitive directories like runtime/scripts. This leads to Remote Code Execution (RCE) when the server reloads the malicious scripts. This vulnerability is fixed in 1.2.11. |
| Under specific conditions when processing a maliciously crafted value of type Hash r, Mongoid::Criteria.from_hash may allow for executing arbitrary Ruby code. |
| The mongo-go-driver repository contains CGo bindings for GSSAPI (Kerberos) authentication on Linux and macOS. The C wrapper implementation contains a heap out-of-bounds read vulnerability due to incorrect assumptions about string termination in the GSSAPI standard. Since GSSAPI buffers are not guaranteed to be null-terminated or have extra padding, this results in reading one byte past the allocated heap buffer. |
| FrankenPHP is a modern application server for PHP. Prior to 1.11.2, FrankenPHP’s CGI path splitting logic improperly handles Unicode characters during case conversion. The logic computes the split index (for finding .php) on a lowercased copy of the request path but applies that byte index to the original path. Because strings.ToLower() in Go can increase the byte length of certain UTF-8 characters (e.g., Ⱥ expands when lowercased), the computed index may not align with the correct position in the original string. This results in an incorrect SCRIPT_NAME and SCRIPT_FILENAME, potentially causing FrankenPHP to execute a file other than the one intended by the URI. This vulnerability is fixed in 1.11.2. |
| A weakness has been identified in xlnt-community xlnt up to 1.6.1. Impacted is the function xlnt::detail::decode_base64 of the file source/detail/cryptography/base64.cpp of the component Encrypted XLSX File Parser. Executing a manipulation can lead to off-by-one. The attack requires local access. The exploit has been made available to the public and could be used for attacks. This patch is called f2d7bf494e5c52706843cf7eb9892821bffb0734. Applying a patch is advised to resolve this issue. |
| Beszel is a server monitoring platform. Prior to 0.18.7, some API endpoints in the Beszel hub accept a user-supplied system ID and proceed without further checks that the user should have access to that system. As a result, any authenticated user can access these routes for any system if they know the system's ID. System IDs are random 15 character alphanumeric strings, and are not exposed to all users. However, it is theoretically possible for an authenticated user to enumerate a valid system ID via web API. To use the containers endpoints, the user would also need to enumerate a container ID, which is 12 digit hexadecimal string. This vulnerability is fixed in 0.18.7. |
| Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Static determines whether a request should be served as a static file using a simple string prefix check. When configured with URL prefixes such as "/css", it matches any request path that begins with that string, including unrelated paths such as "/css-config.env" or "/css-backup.sql". As a result, files under the static root whose names merely share the configured prefix may be served unintentionally, leading to information disclosure. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6. |
| Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Static#applicable_rules evaluates several header_rules types against the raw URL-encoded PATH_INFO, while the underlying file-serving path is decoded before the file is served. As a result, a request for a URL-encoded variant of a static path can serve the same file without the headers that header_rules were intended to apply. In deployments that rely on Rack::Static to attach security-relevant response headers to static content, this can allow an attacker to bypass those headers by requesting an encoded form of the path. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6. |
| IEC 60870-5-104: Potential Denial of Service impact on reception of invalid U-format frame. Product is only affected if IEC 60870-5-104 bi-directional functionality is configured. Enabling secure communication following IEC 62351-3 does not remediate the vulnerability but mitigates the risk of exploitation. |
| Caddy is an extensible server platform that uses TLS by default. Prior to version 2.11.1, Caddy's FastCGI path splitting logic computes the split index on a lowercased copy of the request path and then uses that byte index to slice the original path. This is unsafe for Unicode because `strings.ToLower()` can change UTF-8 byte length for some characters. As a result, Caddy can derive an incorrect `SCRIPT_NAME`/`SCRIPT_FILENAME` and `PATH_INFO`, potentially causing a request that contains `.php` to execute a different on-disk file than intended (path confusion). In setups where an attacker can control file contents (e.g., upload features), this can lead to unintended PHP execution of non-.php files (potential RCE depending on deployment). Version 2.11.1 fixes the issue. |
| Craft is a content management system (CMS). Prior to 5.9.0-beta.1 and 4.17.0-beta.1, Craft CMS implements a blocklist to prevent potentially dangerous PHP functions from being called via Twig non-Closure arrow functions. In order to be able to successfully execute this attack, you need to either have allowAdminChanges enabled on production, or a compromised admin account, or an account with access to the System Messages utility. Several PHP functions are not included in the blocklist, which could allow malicious actors with the required permissions to execute various types of payloads, including RCEs, arbitrary file reads, SSRFs, and SSTIs. This vulnerability is fixed in 5.9.0-beta.1 and 4.17.0-beta.1. |
| Fastify incorrectly accepts malformed `Content-Type` headers containing trailing characters after the subtype token, in violation of RFC 9110 §8.3.1(https://httpwg.org/specs/rfc9110.html#field.content-type). For example, a request sent with Content-Type: application/json garbage passes validation and is processed normally, rather than being rejected with 415 Unsupported Media Type.
When regex-based content-type parsers are in use (a documented Fastify feature), the malformed value is matched against registered parsers using the full string including the trailing garbage. This means a request with an invalid content-type may be routed to and processed by a parser it should never have reached.
Impact:
An attacker can send requests with RFC-invalid Content-Type headers that bypass validity checks, reach content-type parser matching, and be processed by the server. Requests that should be rejected at the validation stage are instead handled as if the content-type were valid.
Workarounds:
Deploy a WAF rule to protect against this
Fix:
The fix is available starting with v5.8.1. |
| Off-by-one buffer overflow in the Instance_options::complete_initialization function in instance_options.cc in the Instance Manager in MySQL before 5.0.23 and 5.1 before 5.1.12 might allow local users to cause a denial of service (application crash) via unspecified vectors, which triggers the overflow when the convert_dirname function is called. NOTE: the vendor has disputed this issue via e-mail to CVE, saying that it is only exploitable when the user has access to the configuration file or the Instance Manager daemon. Due to intended functionality, this level of access would already allow the user to disrupt program operation, so this does not cross security boundaries and is not a vulnerability |
| Epic Games Unreal Engine 226f through 436 allows remote attackers to cause a denial of service (CPU consumption or crash) and possibly execute arbitrary code via (1) a packet with a negative size value, which is treated as a large positive number during memory allocation, or (2) a negative size value in a package file. |
| Integer underflow in Apple Quicktime before 7.0.4 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via the Color Map Entry Size in a TGA image file. |
