Export limit exceeded: 361482 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20006 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40194 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request() The cpufreq_cpu_put() call in update_qos_request() takes place too early because the latter subsequently calls freq_qos_update_request() that indirectly accesses the policy object in question through the QoS request object passed to it. Fortunately, update_qos_request() is called under intel_pstate_driver_lock, so this issue does not matter for changing the intel_pstate operation mode, but it theoretically can cause a crash to occur on CPU device hot removal (which currently can only happen in virt, but it is formally supported nevertheless). Address this issue by modifying update_qos_request() to drop the reference to the policy later. | ||||
| CVE-2025-40073 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Do not validate SSPP when it is not ready Current code will validate current plane and previous plane to confirm they can share a SSPP with multi-rect mode. The SSPP is already allocated for previous plane, while current plane is not associated with any SSPP yet. Null pointer is referenced when validating the SSPP of current plane. Skip SSPP validation for current plane. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: SM8650 EV1 rev1 4slam 2et (DT) pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : dpu_plane_is_multirect_capable+0x68/0x90 lr : dpu_assign_plane_resources+0x288/0x410 sp : ffff800093dcb770 x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000 x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800 x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080 x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200 x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000 x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950 x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438 x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000 Call trace: dpu_plane_is_multirect_capable+0x68/0x90 (P) dpu_crtc_atomic_check+0x5bc/0x650 drm_atomic_helper_check_planes+0x13c/0x220 drm_atomic_helper_check+0x58/0xb8 msm_atomic_check+0xd8/0xf0 drm_atomic_check_only+0x4a8/0x968 drm_atomic_commit+0x50/0xd8 drm_atomic_helper_update_plane+0x140/0x188 __setplane_atomic+0xfc/0x148 drm_mode_setplane+0x164/0x378 drm_ioctl_kernel+0xc0/0x140 drm_ioctl+0x20c/0x500 __arm64_sys_ioctl+0xbc/0xf8 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x48/0xf8 do_el0_svc+0x28/0x40 el0_svc+0x30/0xd0 el0t_64_sync_handler+0x144/0x168 el0t_64_sync+0x198/0x1a0 Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1) ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/patch/669224/ | ||||
| CVE-2025-40189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom Syzbot reported read of uninitialized variable BUG with following call stack. lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout ===================================================== BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707 Local variable sig.i.i created at: lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM read timeout errors (-ETIMEDOUT). In the fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error. As a result, callers could mistakenly treat the data buffer as valid even though the EEPROM read had actually timed out with no data or partial data. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM timeout error correctly to the caller. | ||||
| CVE-2025-25273 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-40193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xtensa: simdisk: add input size check in proc_write_simdisk A malicious user could pass an arbitrarily bad value to memdup_user_nul(), potentially causing kernel crash. This follows the same pattern as commit ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") | ||||
| CVE-2025-40180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop The cleanup loop was starting at the wrong array index, causing out-of-bounds access. Start the loop at the correct index for zero-indexed arrays to prevent accessing memory beyond the allocated array bounds. | ||||
| CVE-2025-40088 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp() The hfsplus_strcasecmp() logic can trigger the issue: [ 117.317703][ T9855] ================================================================== [ 117.318353][ T9855] BUG: KASAN: slab-out-of-bounds in hfsplus_strcasecmp+0x1bc/0x490 [ 117.318991][ T9855] Read of size 2 at addr ffff88802160f40c by task repro/9855 [ 117.319577][ T9855] [ 117.319773][ T9855] CPU: 0 UID: 0 PID: 9855 Comm: repro Not tainted 6.17.0-rc6 #33 PREEMPT(full) [ 117.319780][ T9855] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 117.319783][ T9855] Call Trace: [ 117.319785][ T9855] <TASK> [ 117.319788][ T9855] dump_stack_lvl+0x1c1/0x2a0 [ 117.319795][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319803][ T9855] ? __pfx_dump_stack_lvl+0x10/0x10 [ 117.319808][ T9855] ? rcu_is_watching+0x15/0xb0 [ 117.319816][ T9855] ? lock_release+0x4b/0x3e0 [ 117.319821][ T9855] ? __kasan_check_byte+0x12/0x40 [ 117.319828][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319835][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319842][ T9855] print_report+0x17e/0x7e0 [ 117.319848][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319855][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319862][ T9855] ? __phys_addr+0xd3/0x180 [ 117.319869][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319876][ T9855] kasan_report+0x147/0x180 [ 117.319882][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319891][ T9855] hfsplus_strcasecmp+0x1bc/0x490 [ 117.319900][ T9855] ? __pfx_hfsplus_cat_case_cmp_key+0x10/0x10 [ 117.319906][ T9855] hfs_find_rec_by_key+0xa9/0x1e0 [ 117.319913][ T9855] __hfsplus_brec_find+0x18e/0x470 [ 117.319920][ T9855] ? __pfx_hfsplus_bnode_find+0x10/0x10 [ 117.319926][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319933][ T9855] ? __pfx___hfsplus_brec_find+0x10/0x10 [ 117.319942][ T9855] hfsplus_brec_find+0x28f/0x510 [ 117.319949][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319956][ T9855] ? __pfx_hfsplus_brec_find+0x10/0x10 [ 117.319963][ T9855] ? __kmalloc_noprof+0x2a9/0x510 [ 117.319969][ T9855] ? hfsplus_find_init+0x8c/0x1d0 [ 117.319976][ T9855] hfsplus_brec_read+0x2b/0x120 [ 117.319983][ T9855] hfsplus_lookup+0x2aa/0x890 [ 117.319990][ T9855] ? __pfx_hfsplus_lookup+0x10/0x10 [ 117.320003][ T9855] ? d_alloc_parallel+0x2f0/0x15e0 [ 117.320008][ T9855] ? __lock_acquire+0xaec/0xd80 [ 117.320013][ T9855] ? __pfx_d_alloc_parallel+0x10/0x10 [ 117.320019][ T9855] ? __raw_spin_lock_init+0x45/0x100 [ 117.320026][ T9855] ? __init_waitqueue_head+0xa9/0x150 [ 117.320034][ T9855] __lookup_slow+0x297/0x3d0 [ 117.320039][ T9855] ? __pfx___lookup_slow+0x10/0x10 [ 117.320045][ T9855] ? down_read+0x1ad/0x2e0 [ 117.320055][ T9855] lookup_slow+0x53/0x70 [ 117.320065][ T9855] walk_component+0x2f0/0x430 [ 117.320073][ T9855] path_lookupat+0x169/0x440 [ 117.320081][ T9855] filename_lookup+0x212/0x590 [ 117.320089][ T9855] ? __pfx_filename_lookup+0x10/0x10 [ 117.320098][ T9855] ? strncpy_from_user+0x150/0x290 [ 117.320105][ T9855] ? getname_flags+0x1e5/0x540 [ 117.320112][ T9855] user_path_at+0x3a/0x60 [ 117.320117][ T9855] __x64_sys_umount+0xee/0x160 [ 117.320123][ T9855] ? __pfx___x64_sys_umount+0x10/0x10 [ 117.320129][ T9855] ? do_syscall_64+0xb7/0x3a0 [ 117.320135][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320141][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320145][ T9855] do_syscall_64+0xf3/0x3a0 [ 117.320150][ T9855] ? exc_page_fault+0x9f/0xf0 [ 117.320154][ T9855] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320158][ T9855] RIP: 0033:0x7f7dd7908b07 [ 117.320163][ T9855] Code: 23 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 08 [ 117.320167][ T9855] RSP: 002b:00007ffd5ebd9698 EFLAGS: 00000202 ---truncated--- | ||||
| CVE-2025-40084 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: transport_ipc: validate payload size before reading handle handle_response() dereferences the payload as a 4-byte handle without verifying that the declared payload size is at least 4 bytes. A malformed or truncated message from ksmbd.mountd can lead to a 4-byte read past the declared payload size. Validate the size before dereferencing. This is a minimal fix to guard the initial handle read. | ||||
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-40017 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix memory leak by freeing untracked persist buffer One internal buffer which is allocated only once per session was not being freed during session close because it was not being tracked as part of internal buffer list which resulted in a memory leak. Add the necessary logic to explicitly free the untracked internal buffer during session close to ensure all allocated memory is released properly. | ||||
| CVE-2025-40015 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-csi: Fix dereference before NULL check In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while assigning a value to the 'src_pad'. However the same value is being checked against NULL at a later point of time indicating that there are chances that the value can be NULL. Move the dereference after the NULL check. | ||||
| CVE-2025-22836 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-40013 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: audioreach: fix potential null pointer dereference It is possible that the topology parsing function audioreach_widget_load_module_common() could return NULL or an error pointer. Add missing NULL check so that we do not dereference it. | ||||
| CVE-2025-40041 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Sign-extend struct ops return values properly The ns_bpf_qdisc selftest triggers a kernel panic: Oops[#1]: CPU 0 Unable to handle kernel paging request at virtual address 0000000000741d58, era == 90000000851b5ac0, ra == 90000000851b5aa4 CPU: 0 UID: 0 PID: 449 Comm: test_progs Tainted: G OE 6.16.0+ #3 PREEMPT(full) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000851b5ac0 ra 90000000851b5aa4 tp 90000001076b8000 sp 90000001076bb600 a0 0000000000741ce8 a1 0000000000000001 a2 90000001076bb5c0 a3 0000000000000008 a4 90000001004c4620 a5 9000000100741ce8 a6 0000000000000000 a7 0100000000000000 t0 0000000000000010 t1 0000000000000000 t2 9000000104d24d30 t3 0000000000000001 t4 4f2317da8a7e08c4 t5 fffffefffc002f00 t6 90000001004c4620 t7 ffffffffc61c5b3d t8 0000000000000000 u0 0000000000000001 s9 0000000000000050 s0 90000001075bc800 s1 0000000000000040 s2 900000010597c400 s3 0000000000000008 s4 90000001075bc880 s5 90000001075bc8f0 s6 0000000000000000 s7 0000000000741ce8 s8 0000000000000000 ra: 90000000851b5aa4 __qdisc_run+0xac/0x8d8 ERA: 90000000851b5ac0 __qdisc_run+0xc8/0x8d8 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000741d58 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)] Process test_progs (pid: 449, threadinfo=000000009af02b3a, task=00000000e9ba4956) Stack : 0000000000000000 90000001075bc8ac 90000000869524a8 9000000100741ce8 90000001075bc800 9000000100415300 90000001075bc8ac 0000000000000000 900000010597c400 900000008694a000 0000000000000000 9000000105b59000 90000001075bc800 9000000100741ce8 0000000000000050 900000008513000c 9000000086936000 0000000100094d4c fffffff400676208 0000000000000000 9000000105b59000 900000008694a000 9000000086bf0dc0 9000000105b59000 9000000086bf0d68 9000000085147010 90000001075be788 0000000000000000 9000000086bf0f98 0000000000000001 0000000000000010 9000000006015840 0000000000000000 9000000086be6c40 0000000000000000 0000000000000000 0000000000000000 4f2317da8a7e08c4 0000000000000101 4f2317da8a7e08c4 ... Call Trace: [<90000000851b5ac0>] __qdisc_run+0xc8/0x8d8 [<9000000085130008>] __dev_queue_xmit+0x578/0x10f0 [<90000000853701c0>] ip6_finish_output2+0x2f0/0x950 [<9000000085374bc8>] ip6_finish_output+0x2b8/0x448 [<9000000085370b24>] ip6_xmit+0x304/0x858 [<90000000853c4438>] inet6_csk_xmit+0x100/0x170 [<90000000852b32f0>] __tcp_transmit_skb+0x490/0xdd0 [<90000000852b47fc>] tcp_connect+0xbcc/0x1168 [<90000000853b9088>] tcp_v6_connect+0x580/0x8a0 [<90000000852e7738>] __inet_stream_connect+0x170/0x480 [<90000000852e7a98>] inet_stream_connect+0x50/0x88 [<90000000850f2814>] __sys_connect+0xe4/0x110 [<90000000850f2858>] sys_connect+0x18/0x28 [<9000000085520c94>] do_syscall+0x94/0x1a0 [<9000000083df1fb8>] handle_syscall+0xb8/0x158 Code: 4001ad80 2400873f 2400832d <240073cc> 001137ff 001133ff 6407b41f 001503cc 0280041d ---[ end trace 0000000000000000 ]--- The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer is treated as a 32bit value and sign extend to 64bit in epilogue. This behavior is right for most bpf prog types but wrong for struct ops which requires LoongArch ABI. So let's sign extend struct ops return values according to the LoongArch ABI ([1]) and return value spec in function model. [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html | ||||
| CVE-2025-68371 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix device resources accessed after device removal Correct possible race conditions during device removal. Previously, a scheduled work item to reset a LUN could still execute after the device was removed, leading to use-after-free and other resource access issues. This race condition occurs because the abort handler may schedule a LUN reset concurrently with device removal via sdev_destroy(), leading to use-after-free and improper access to freed resources. - Check in the device reset handler if the device is still present in the controller's SCSI device list before running; if not, the reset is skipped. - Cancel any pending TMF work that has not started in sdev_destroy(). - Ensure device freeing in sdev_destroy() is done while holding the LUN reset mutex to avoid races with ongoing resets. | ||||
| CVE-2025-40165 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: m2m: Fix streaming cleanup on release If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. | ||||
| CVE-2025-24484 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-68255 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing The Supported Rates IE length from an incoming Association Request frame was used directly as the memcpy() length when copying into a fixed-size 16-byte stack buffer (supportRate). A malicious station can advertise an IE length larger than 16 bytes, causing a stack buffer overflow. Clamp ie_len to the buffer size before copying the Supported Rates IE, and correct the bounds check when merging Extended Supported Rates to prevent a second potential overflow. This prevents kernel stack corruption triggered by malformed association requests. | ||||
| CVE-2025-68257 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: check device's attached status in compat ioctls Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||