| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds check on Transfer Tag
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix use-after-free during usb config switch
In the process of switching USB config from rndis to other config,
if the hardware does not support the ->pullup callback, or the
hardware encounters a low probability fault, both of them may cause
the ->pullup callback to fail, which will then cause a system panic
(use after free).
The gadget drivers sometimes need to be unloaded regardless of the
hardware's behavior.
Analysis as follows:
=======================================================================
(1) write /config/usb_gadget/g1/UDC "none"
gether_disconnect+0x2c/0x1f8
rndis_disable+0x4c/0x74
composite_disconnect+0x74/0xb0
configfs_composite_disconnect+0x60/0x7c
usb_gadget_disconnect+0x70/0x124
usb_gadget_unregister_driver+0xc8/0x1d8
gadget_dev_desc_UDC_store+0xec/0x1e4
(2) rm /config/usb_gadget/g1/configs/b.1/f1
rndis_deregister+0x28/0x54
rndis_free+0x44/0x7c
usb_put_function+0x14/0x1c
config_usb_cfg_unlink+0xc4/0xe0
configfs_unlink+0x124/0x1c8
vfs_unlink+0x114/0x1dc
(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4
panic+0x1fc/0x3d0
do_page_fault+0xa8/0x46c
do_mem_abort+0x3c/0xac
el1_sync_handler+0x40/0x78
0xffffff801138f880
rndis_close+0x28/0x34
eth_stop+0x74/0x110
dev_close_many+0x48/0x194
rollback_registered_many+0x118/0x814
unregister_netdev+0x20/0x30
gether_cleanup+0x1c/0x38
rndis_attr_release+0xc/0x14
kref_put+0x74/0xb8
configfs_rmdir+0x314/0x374
If gadget->ops->pullup() return an error, function rndis_close() will be
called, then it will causes a use-after-free problem.
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
There are two refcount leak bugs in qcom_smsm_probe():
(1) The 'local_node' is escaped out from for_each_child_of_node() as
the break of iteration, we should call of_node_put() for it in error
path or when it is not used anymore.
(2) The 'node' is escaped out from for_each_available_child_of_node()
as the 'goto', we should call of_node_put() for it in goto target. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
[PM: wrap long BUG() output lines, tweak subject line] |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix DMA mappings leak
During reallocation of RX buffers, new DMA mappings are created for
those buffers.
steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix use after free in _ipmi_destroy_user()
The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
Testing tools/testing/selftests/timens/vfork_exec.c got below
kernel log:
[ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020
[ 6.842255] Oops [#1]
[ 6.842871] Modules linked in:
[ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8
[ 6.845861] Hardware name: riscv-virtio,qemu (DT)
[ 6.848009] epc : vdso_join_timens+0xd2/0x110
[ 6.850097] ra : vdso_join_timens+0xd2/0x110
[ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0
[ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030
[ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40
[ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c
[ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000
[ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038
[ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000
[ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38
[ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e
[ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f
[ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00
[ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d
[ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a
[ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4
[ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0
[ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214
[ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4
[ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee
[ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48
[ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2
[ 6.877484] ---[ end trace 0000000000000000 ]---
This is because the mm->context.vdso_info is NULL in vfork case. From
another side, mm->context.vdso_info either points to vdso info
for RV64 or vdso info for compat, there's no need to bloat riscv's
mm_context_t, we can handle the difference when setup the additional
page for vdso. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: restrict sockets to TCP and UDP
Recently, syzbot started to abuse NBD with all kinds of sockets.
Commit cf1b2326b734 ("nbd: verify socket is supported during setup")
made sure the socket supported a shutdown() method.
Explicitely accept TCP and UNIX stream sockets. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: Validate the return value of mnt_ns_from_dentry() before dereferencing
The function do_fanotify_mark() does not validate if
mnt_ns_from_dentry() returns NULL before dereferencing mntns->user_ns.
This causes a NULL pointer dereference in do_fanotify_mark() if the
path is not a mount namespace object.
Fix this by checking mnt_ns_from_dentry()'s return value before
dereferencing it.
Before the patch
$ gcc fanotify_nullptr.c -o fanotify_nullptr
$ mkdir A
$ ./fanotify_nullptr
Fanotify fd: 3
fanotify_mark: Operation not permitted
$ unshare -Urm
Fanotify fd: 3
Killed
int main(void){
int ffd;
ffd = fanotify_init(FAN_CLASS_NOTIF | FAN_REPORT_MNT, 0);
if(ffd < 0){
perror("fanotify_init");
exit(EXIT_FAILURE);
}
printf("Fanotify fd: %d\n",ffd);
if(fanotify_mark(ffd, FAN_MARK_ADD | FAN_MARK_MNTNS,
FAN_MNT_ATTACH, AT_FDCWD, "A") < 0){
perror("fanotify_mark");
exit(EXIT_FAILURE);
}
return 0;
}
After the patch
$ gcc fanotify_nullptr.c -o fanotify_nullptr
$ mkdir A
$ ./fanotify_nullptr
Fanotify fd: 3
fanotify_mark: Operation not permitted
$ unshare -Urm
Fanotify fd: 3
fanotify_mark: Invalid argument
[ 25.694973] BUG: kernel NULL pointer dereference, address: 0000000000000038
[ 25.695006] #PF: supervisor read access in kernel mode
[ 25.695012] #PF: error_code(0x0000) - not-present page
[ 25.695017] PGD 109a30067 P4D 109a30067 PUD 142b46067 PMD 0
[ 25.695025] Oops: Oops: 0000 [#1] SMP NOPTI
[ 25.695032] CPU: 4 UID: 1000 PID: 1478 Comm: fanotify_nullpt Not
tainted 6.17.0-rc4 #1 PREEMPT(lazy)
[ 25.695040] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[ 25.695049] RIP: 0010:do_fanotify_mark+0x817/0x950
[ 25.695066] Code: 04 00 00 e9 45 fd ff ff 48 8b 7c 24 48 4c 89 54
24 18 4c 89 5c 24 10 4c 89 0c 24 e8 b3 11 fc ff 4c 8b 54 24 18 4c 8b
5c 24 10 <48> 8b 78 38 4c 8b 0c 24 49 89 c4 e9 13 fd ff ff 8b 4c 24 28
85 c9
[ 25.695081] RSP: 0018:ffffd31c469e3c08 EFLAGS: 00010203
[ 25.695104] RAX: 0000000000000000 RBX: 0000000001000000 RCX: ffff8eb48aebd220
[ 25.695110] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8eb4835e8180
[ 25.695115] RBP: 0000000000000111 R08: 0000000000000000 R09: 0000000000000000
[ 25.695142] R10: ffff8eb48a7d56c0 R11: ffff8eb482bede00 R12: 00000000004012a7
[ 25.695148] R13: 0000000000000110 R14: 0000000000000001 R15: ffff8eb48a7d56c0
[ 25.695154] FS: 00007f8733bda740(0000) GS:ffff8eb61ce5f000(0000)
knlGS:0000000000000000
[ 25.695162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.695170] CR2: 0000000000000038 CR3: 0000000136994006 CR4: 00000000003706f0
[ 25.695201] Call Trace:
[ 25.695209] <TASK>
[ 25.695215] __x64_sys_fanotify_mark+0x1f/0x30
[ 25.695222] do_syscall_64+0x82/0x2c0
... |
| In the Linux kernel, the following vulnerability has been resolved:
pps: fix warning in pps_register_cdev when register device fail
Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: comp - Use same definition of context alloc and free ops
In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation
code into acomp"), the crypto_acomp_streams struct was made to rely on
having the alloc_ctx and free_ctx operations defined in the same order
as the scomp_alg struct. But in that same commit, the alloc_ctx and
free_ctx members of scomp_alg may be randomized by structure layout
randomization, since they are contained in a pure ops structure
(containing only function pointers). If the pointers within scomp_alg
are randomized, but those in crypto_acomp_streams are not, then
the order may no longer match. This fixes the problem by removing the
union from scomp_alg so that both crypto_acomp_streams and scomp_alg
will share the same definition of alloc_ctx and free_ctx, ensuring
they will always have the same layout. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: trbe: Return NULL pointer for allocation failures
When the TRBE driver fails to allocate a buffer, it currently returns
the error code "-ENOMEM". However, the caller etm_setup_aux() only
checks for a NULL pointer, so it misses the error. As a result, the
driver continues and eventually causes a kernel panic.
Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on
allocation failures. This allows that the callers can properly handle
the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Disallow dirty tracking if incoherent page walk
Dirty page tracking relies on the IOMMU atomically updating the dirty bit
in the paging-structure entry. For this operation to succeed, the paging-
structure memory must be coherent between the IOMMU and the CPU. In
another word, if the iommu page walk is incoherent, dirty page tracking
doesn't work.
The Intel VT-d specification, Section 3.10 "Snoop Behavior" states:
"Remapping hardware encountering the need to atomically update A/EA/D bits
in a paging-structure entry that is not snooped will result in a non-
recoverable fault."
To prevent an IOMMU from being incorrectly configured for dirty page
tracking when it is operating in an incoherent mode, mark SSADS as
supported only when both ecap_slads and ecap_smpwc are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Modify the return value check
The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: fix uninit-value in squashfs_get_parent
Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.
This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number. In particular the inode number
is that of a symbolic link, rather than a directory.
Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.
unsigned int parent_ino = squashfs_i(inode)->parent;
Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.
The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.
Regular inodes used to share the parent field with the block_list_start
field. This is removed in this commit to enable the parent field to
contain the invalid inode number 0. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: check the return value of pinmux_ops::get_function_name()
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
Fix the below kernel panic due to null pointer access:
[ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[ 18.513464] Mem abort info:
[ 18.516346] ESR = 0x0000000096000005
[ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 18.525706] SET = 0, FnV = 0
[ 18.528878] EA = 0, S1PTW = 0
[ 18.532117] FSC = 0x05: level 1 translation fault
[ 18.537138] Data abort info:
[ 18.540110] ISV = 0, ISS = 0x00000005
[ 18.544060] CM = 0, WnR = 0
[ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[ 18.696758] Call trace:
[ 18.699278] adreno_gpu_cleanup+0x30/0x88
[ 18.703396] a6xx_destroy+0xc0/0x130
[ 18.707066] a6xx_gpu_init+0x308/0x424
[ 18.710921] adreno_bind+0x178/0x288
[ 18.714590] component_bind_all+0xe0/0x214
[ 18.718797] msm_drm_bind+0x1d4/0x614
[ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8
[ 18.728105] __component_add+0xa0/0x158
[ 18.732048] component_add+0x20/0x2c
[ 18.735719] adreno_probe+0x40/0xc0
[ 18.739300] platform_probe+0xb4/0xd4
[ 18.743068] really_probe+0xfc/0x284
[ 18.746738] __driver_probe_device+0xc0/0xec
[ 18.751129] driver_probe_device+0x48/0x110
[ 18.755421] __device_attach_driver+0xa8/0xd0
[ 18.759900] bus_for_each_drv+0x90/0xdc
[ 18.763843] __device_attach+0xfc/0x174
[ 18.767786] device_initial_probe+0x20/0x2c
[ 18.772090] bus_probe_device+0x40/0xa0
[ 18.776032] deferred_probe_work_func+0x94/0xd0
[ 18.780686] process_one_work+0x190/0x3d0
[ 18.784805] worker_thread+0x280/0x3d4
[ 18.788659] kthread+0x104/0x1c0
[ 18.791981] ret_from_fork+0x10/0x20
[ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[ 18.801913] ---[ end trace 0000000000000000 ]---
[ 18.809039] Kernel panic - not syncing: Oops: Fatal exception
Patchwork: https://patchwork.freedesktop.org/patch/515605/ |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability in a video decoder, where an attacker might cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic
The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.
A panic was reported on arm64:
[ 60.137988] ------------[ cut here ]------------
[ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[ 60.213149] lr : swiotlb_map+0x88/0x1f0
[ 60.216982] sp : ffff80000a883bc0
[ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[ 60.291658] Call trace:
[ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590
[ 60.298629] swiotlb_map+0x88/0x1f0
[ 60.302115] dma_map_page_attrs+0x188/0x230
[ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[ 60.312660] __arm64_sys_ioctl+0xa8/0xf0
[ 60.316583] invoke_syscall+0x44/0x108
[ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0
[ 60.325038] do_el0_svc+0x2c/0xb8
[ 60.328351] el0_svc+0x2c/0x88
[ 60.331406] el0t_64_sync_handler+0xb8/0xc0
[ 60.335587] el0t_64_sync+0x18c/0x190
[ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[ 60.345344] ---[ end trace 0000000000000000 ]---
To fix it, this patch adds a checking the payload length if it is zero. |
