| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient validation of untrusted input in Chrome for iOS in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in Speech in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. |
| Cross-Site request forgery (CSRF) vulnerability in The Wikimedia Foundation Mediawiki - RedirectManager Extension allows Cross Site Request Forgery.
This issue affects Mediawiki - RedirectManager Extension: from * before 1.3.3. |
| D-Link DIR-823-Pro 1.02 has improper permission control, allowing unauthorized users to turn on and access Telnet services. |
| Insufficient validation of untrusted input in HTML in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
.... |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: call pagetable dtor when freeing hot-removed page tables
Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in
__create_pgd_mapping()") page-table allocation on ARM64 always calls
pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to
PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However
the matching pagetable_dtor() calls were never added.
With DEBUG_VM enabled on kernel versions prior to v6.17 without
2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type")
this leads to the following warning when freeing these pages due to
page->page_type sharing page->_mapcount:
BUG: Bad page state in process ... pfn:284fbb
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb
flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff)
page_type: f2(table)
page dumped because: nonzero mapcount
Call trace:
bad_page+0x13c/0x160
__free_frozen_pages+0x6cc/0x860
___free_pages+0xf4/0x180
free_pages+0x54/0x80
free_hotplug_page_range.part.0+0x58/0x90
free_empty_tables+0x438/0x500
__remove_pgd_mapping.constprop.0+0x60/0xa8
arch_remove_memory+0x48/0x80
try_remove_memory+0x158/0x1d8
offline_and_remove_memory+0x138/0x180
It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is
defined and incorrect NR_PAGETABLE stats. Fix this by calling
pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page
to undo the effects of calling pagetable_*_ctor(). |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init
Regmap initialization triggers regcache_maple_populate() which attempts
SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to
be set, without them, NULL pointer dereference occurs during probe.
Move initialization before mcp23s08_spi_regmap_init() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: fix NULL pointer dereference in sdca_dev_unregister_functions
sdca_dev_unregister_functions() iterates over all SDCA function
descriptors and calls sdca_dev_unregister() on each func_dev without
checking for NULL. When a function registration has failed partway
through, or the device cleanup races with probe deferral, func_dev
entries may be NULL, leading to a kernel oops:
BUG: kernel NULL pointer dereference, address: 0000000000000040
RIP: 0010:device_del+0x1e/0x3e0
Call Trace:
sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca]
release_nodes+0x35/0xb0
devres_release_all+0x90/0x100
device_unbind_cleanup+0xe/0x80
device_release_driver_internal+0x1c1/0x200
bus_remove_device+0xc6/0x130
device_del+0x161/0x3e0
device_unregister+0x17/0x60
sdw_delete_slave+0xb6/0xd0 [soundwire_bus]
sdw_bus_master_delete+0x1e/0x50 [soundwire_bus]
...
sof_probe_work+0x19/0x30 [snd_sof]
This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake)
with the SOF audio driver probe failing due to missing Panther Lake
firmware, causing the subsequent cleanup of SoundWire devices to
trigger the crash.
Fix this with three changes:
1) Add a NULL guard in sdca_dev_unregister() so that callers do not
need to pre-validate the pointer (defense in depth).
2) In sdca_dev_unregister_functions(), skip NULL func_dev entries
and clear func_dev to NULL after unregistration, making the
function idempotent and safe against double-invocation.
3) In sdca_dev_register_functions(), roll back all previously
registered functions when a later one fails, so the function
array is never left in a partially-populated state. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: wm_adsp: Fix NULL dereference when removing firmware controls
In wm_adsp_control_remove() check that the priv pointer is not NULL
before attempting to cleanup what it points to.
When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that
wm_adsp can create its own private control data. There are two cases
where private data is not created:
1. The control is a SYSTEM control, so an ALSA control is not created.
2. The codec driver has registered a control_add() callback that
hides the control, so wm_adsp_control_add() is not called.
When cs_dsp_remove destroys its control list it calls
wm_adsp_control_remove() for each control. But wm_adsp_control_remove()
was attempting to cleanup the private data pointed to by cs_ctl->priv
without checking the pointer for NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI
Fixes a warning while dumping core:
[54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
| Guardian language-system passes the id GET parameter directly into an unsanitized SQL query in media.php (line 17): SELECT id, filename, extension, type, duration, owner, private FROM files where id = '\".$_GET['id'].\"'. An authenticated attacker can perform error-based SQL injection to extract database contents. |
| Guardian language-system passes the id GET parameter directly into a PHP exec() call in subtitles.php (line 19) without sanitization: exec(\"php jobs/subtitle_rendering.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to the id parameter to execute arbitrary OS commands on the server. |
| We found a chain of combining multiple weaknesses in the product that could allow an attacker to become any user in the backend and access any data:
*
The payment integration plugins Stripe (included in the core system), pretix-mollie, pretix-oppwa, pretix-bitpay, pretix-payone, pretix-secuconnect, pretix-sofort, and pretix-saferpay
contain a code path that is intended for the transport of session
parameters from a tab with isolated cookies (e.g. in the pretix widget)
to a new tab. For this purpose, a set of session parameters is
cryptographically signed and then passed to the new tab as a URL
parameter. The plugins perform no further validation of the session
parameters, other than the cryptographic signature being valid. This is
fixed with the releases issued today by strictly validating that no
session parameters outside of the scope of the respective plugin may be
set.
*
An unrelated feature in the core system is used to generate redirect links that obfuscate any Referer
headers for outgoing links to prevent leakage of secrets in URLs. This
redirect page also requires cryptographically signed parameters.
Unfortunately, it uses the same key and salt for the signature as the
previously mentioned feature in the payment integration plugins. A
motivated attacker with access to at least one event in the backend can
trick the system into cryptographically signing arbitrary content using
specially crafted links. In combination with the previous issue, the
attacker could use this to set and modify arbitrary parameters on their
user session by injecting the signed parameters into the feature of the
payment providers. This is fixed with the releases issued today by using
different salts for the signature for each plugin and feature.
*
A third, unrelated feature in the core system is used for admin users
to act on behalf of another user, mostly for debugging purposes. With
being able to insert arbitrary parameters into a session, an attacker
can abuse this feature to change their session from their actual user to
any user in the system by guessing a valid user ID. This is fixed with
the release today by requiring unguessable information to be contained
in the session of the user to switch to. |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| Use after free in IME in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in Glic in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
