| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic
The decompress_io_ctx may be released asynchronously after
I/O completion. If this file is deleted immediately after read,
and the kworker of processing post_read_wq has not been executed yet
due to high workloads, It is possible that the inode(f2fs_inode_info)
is evicted and freed before it is used f2fs_free_dic.
The UAF case as below:
Thread A Thread B
- f2fs_decompress_end_io
- f2fs_put_dic
- queue_work
add free_dic work to post_read_wq
- do_unlink
- iput
- evict
- call_rcu
This file is deleted after read.
Thread C kworker to process post_read_wq
- rcu_do_batch
- f2fs_free_inode
- kmem_cache_free
inode is freed by rcu
- process_scheduled_works
- f2fs_late_free_dic
- f2fs_free_dic
- f2fs_release_decomp_mem
read (dic->inode)->i_compress_algorithm
This patch store compress_algorithm and sbi in dic to avoid inode UAF.
In addition, the previous solution is deprecated in [1] may cause system hang.
[1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix use-after free in init error and remove paths
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: efifb: Register sysfs groups through driver core
The driver core can register and cleanup sysfs groups already.
Make use of that functionality to simplify the error handling and
cleanup.
Also avoid a UAF race during unregistering where the sysctl attributes
were usable after the info struct was freed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: af_bluetooth: Fix deadlock
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
fs: dlm: fix use after free in midcomms commit
While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:
[ 151.760477] ==================================================================
[ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347
[ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014
[ 151.768726] Call Trace:
[ 151.769277] <TASK>
[ 151.769748] dump_stack_lvl+0x5b/0x86
[ 151.770556] print_report+0x180/0x4c8
[ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0
[ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.773069] kasan_report+0x93/0x1a0
[ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.774514] __asan_load4+0x7e/0xa0
[ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0
[ 151.776770] send_common+0x19f/0x1b0
[ 151.777342] ? remove_from_waiters+0x60/0x60
[ 151.778017] ? lock_downgrade+0x410/0x410
[ 151.778648] ? __this_cpu_preempt_check+0x13/0x20
[ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0
[ 151.780292] _convert_lock+0x46/0x150
[ 151.780893] convert_lock+0x7b/0xc0
[ 151.781459] dlm_lock+0x3ac/0x580
[ 151.781993] ? 0xffffffffc0540000
[ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70
[ 151.784003] ? preempt_count_sub+0xd6/0x130
[ 151.784661] ? is_module_address+0x47/0x70
[ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.786166] ? 0xffffffffc0540000
[ 151.786693] ? lockdep_init_map_type+0xc3/0x360
[ 151.787414] ? 0xffffffffc0540000
[ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.789858] ? 0xffffffffc0540000
[ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[ 151.791347] ? delay_tsc+0x94/0xc0
[ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture]
[ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0
[ 151.797152] ? mark_held_locks+0x34/0xb0
[ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70
[ 151.798581] ? __kthread_parkme+0x79/0x110
[ 151.799246] ? trace_preempt_on+0x2a/0xf0
[ 151.799902] ? __kthread_parkme+0x79/0x110
[ 151.800579] ? preempt_count_sub+0xd6/0x130
[ 151.801271] ? __kasan_check_read+0x11/0x20
[ 151.801963] ? __kthread_parkme+0xec/0x110
[ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.803569] kthread+0x192/0x1d0
[ 151.804104] ? kthread_complete_and_exit+0x30/0x30
[ 151.804881] ret_from_fork+0x1f/0x30
[ 151.805480] </TASK>
[ 151.806111] Allocated by task 1347:
[ 151.806681] kasan_save_stack+0x26/0x50
[ 151.807308] kasan_set_track+0x25/0x30
[ 151.807920] kasan_save_alloc_info+0x1e/0x30
[ 151.808609] __kasan_slab_alloc+0x63/0x80
[ 151.809263] kmem_cache_alloc+0x1ad/0x830
[ 151.809916] dlm_allocate_mhandle+0x17/0x20
[ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260
[ 151.811344] _create_message+0x95/0x180
[ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0
[ 151.812880] send_common+0x129/0x1b0
[ 151.813467] _convert_lock+0x46/0x150
[ 151.814074] convert_lock+0x7b/0xc0
[ 151.814648] dlm_lock+0x3ac/0x580
[ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.817129] lock_t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: use quiesced elevator switch when reinitializing queues
The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.
nvme nvme0: resetting controller
nvme nvme0: 32/0/0 default/read/poll queues
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
Oops: 0000 [#1] SMP PTI
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:kyber_has_work+0x29/0x70
...
Call Trace:
__blk_mq_do_dispatch_sched+0x83/0x2b0
__blk_mq_sched_dispatch_requests+0x12e/0x170
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x2b/0x50
process_one_work+0x1ef/0x380
worker_thread+0x2d/0x3e0 |
| Use after free in Views in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in SVG in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| A flaw was found in QEMU. If the QIOChannelWebsock object is freed while it is waiting to complete a handshake, a GSource is leaked. This can lead to the callback firing later on and triggering a use-after-free in the use of the channel. This can be abused by a malicious client with network access to the VNC WebSocket port to cause a denial of service during the WebSocket handshake prior to the VNC client authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
| Use after free in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in SurfaceCapture in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Bluetooth in Google Chrome on Mac prior to 148.0.7778.216 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: High) |
