| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix accept queue count leak on transport mismatch
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
On SP804, the delay timer shares the same clkevt instance with
sched_clock. On some platforms, when
sp804_clocksource_and_sched_clock_init is called with use_sched_clock
not set to 1, sched_clkevt is not properly initialized. However,
sp804_register_delay_timer is invoked unconditionally, and
read_current_timer() subsequently calls sp804_read on an uninitialized
sched_clkevt, leading to a kernel Oops when accessing
sched_clkevt->value.
Declare a dedicated clkevt instance exclusively for delay timer,
instead of sharing the same clkevt with sched_clock. This ensures
that read_current_timer continues to work correctly regardless of
whether SP804 is selected as the sched_clock. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| A path handling issue in mod_dav_fs in Apache 2.4.67 and earlier allows a WebDAV content author to directly manipulate trusted DAV property databases, potentially causing child process crashes.
Users are recommended to upgrade to version 2.4.68, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/efi: Fix graceful fault handling after FPU softirq changes
Since commit d02198550423 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.
The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.
Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
window where a softirq may be taken before fpregs_lock() is
called, but after efi_rts_work.efi_rts_id has been assigned,
and any page faults occurring in that window will then be
misidentified as having been caused by the firmware. Instead,
use !in_task(), which incorporates in_serving_softirq(). ] |
| OpenStack Ironic before 35.0.2 allows a malicious authenticated project admin or manager to read local files on the Ironic conductor via a pxe_template. |
| Dräger Zeus Infinity Empowered (Zeus IE) and Zeus RS C500 anesthesia workstations contain a local security vulnerability that allows unauthorized individuals with physical access to compromise software integrity via USB interface manipulation. Attackers can exploit the unprotected USB interfaces to impair therapy functions, manipulate device-processed data, or leverage the device as a pivot point for broader network-based attacks when connected to a network or Dräger Service Connect. |
| A race condition in Grafana Live allows authenticated users with Viewer role to trigger a server crash by sending concurrent requests that cause a fatal map access error. This results in complete service unavailability requiring restart of the Grafana server. |
| Improper Resource Locking vulnerability in Mitsubishi Electric MELSEC iQ-R Series R12CCPU-V firmware versions "16" and prior, Mitsubishi Electric MELSEC-Q Series Q03UDECPU the first 5 digits of serial No. "24061" and prior, Mitsubishi Electric MELSEC-Q Series Q04/06/10/13/20/26/50/100UDEHCPU the first 5 digits of serial No. "24061" and prior, Mitsubishi Electric MELSEC-Q Series Q03/04/06/13/26UDVCPU the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-Q Series Q04/06/13/26UDPVCPU the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-Q Series Q12DCCPU-V all versions, Mitsubishi Electric MELSEC-Q Series Q24DHCCPU-V(G) all versions, Mitsubishi Electric MELSEC-Q Series Q24/26DHCCPU-LS all versions, Mitsubishi Electric MELSEC-L series L02/06/26CPU(-P) the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-L series L26CPU-(P)BT the first 5 digits of serial number "24051" and prior and Mitsubishi Electric MELIPC Series MI5122-VW firmware versions "05" and prior allows a remote unauthenticated attacker to cause a denial of service (DoS) condition in Ethernet communications by sending specially crafted packets. A system reset of the products is required for recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spidev: fix lock inversion between spi_lock and buf_lock
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not strictly require dirty metadata threshold for metadata writepages
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix deadlock when reading partition table
When one process(such as udev) opens ublk block device (e.g., to read
the partition table via bdev_open()), a deadlock[1] can occur:
1. bdev_open() grabs disk->open_mutex
2. The process issues read I/O to ublk backend to read partition table
3. In __ublk_complete_rq(), blk_update_request() or blk_mq_end_request()
runs bio->bi_end_io() callbacks
4. If this triggers fput() on file descriptor of ublk block device, the
work may be deferred to current task's task work (see fput() implementation)
5. This eventually calls blkdev_release() from the same context
6. blkdev_release() tries to grab disk->open_mutex again
7. Deadlock: same task waiting for a mutex it already holds
The fix is to run blk_update_request() and blk_mq_end_request() with bottom
halves disabled. This forces blkdev_release() to run in kernel work-queue
context instead of current task work context, and allows ublk server to make
forward progress, and avoids the deadlock.
[axboe: rewrite comment in ublk] |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler
Naresh Kamboju reported a "Bad frame pointer" kernel warning while
running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the
same issue with the following command:
```
$ cd /sys/kernel/debug/tracing
$ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events
$ echo 1 > events/fprobes/enable
$ echo 1 > tracing_on
$ sleep 1
```
And we can get the following kernel warning:
[ 127.692888] ------------[ cut here ]------------
[ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000
[ 127.693755] from func do_nanosleep return to ffffffff800ccb16
[ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be
[ 127.699894] Modules linked in:
[ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32
[ 127.701453] Hardware name: riscv-virtio,qemu (DT)
[ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be
[ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be
[ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10
[ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000
[ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80
[ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20
[ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000
[ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038
[ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0
[ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068
[ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001
[ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e
[ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18
[ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
[ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be
[ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26
[ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26
[ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54
[ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a
[ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218
[ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156
[ 127.705436] ---[ end trace 0000000000000000 ]---
The reason is that the stack layout for constructing argument for the
ftrace_return_to_handler in the return_to_handler does not match the
__arch_ftrace_regs structure of riscv, leading to unexpected results. |
