| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix memory leak in mwifiex_histogram_read()
Always free the zeroed page on return from 'mwifiex_histogram_read()'. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: IOMMUFD_DESTROY should not increase the refcount
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-core: fix memory leak in dhchap_ctrl_secret
Free dhchap_secret in nvme_ctrl_dhchap_ctrl_secret_store() before we
return when nvme_auth_generate_key() returns error. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: don't assume adequate headroom for SDIO headers
mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and
mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that
adequate headroom will be available in the passed skb. This assumption
typically is satisfied when the skb was allocated in the net core for
transmission via the mt7921 netdev (although even that is only an
optimization and is not strictly guaranteed), but the assumption is
sometimes not satisfied when the skb originated in the receive path of
another netdev and was passed through to the mt7921, such as by the
bridge layer. Blindly prepending bytes to an skb is always wrong.
This commit introduces a call to skb_cow_head() before the call to
mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to
ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be
pushed onto the skb.
Without this fix, I can trivially cause kernel panics by bridging an
MT7921AU-based USB 802.11ax interface with an Ethernet interface on an
Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet
adapter and also on an ARM-based Raspberry Pi 1 using its onboard
SMSC9512 USB Ethernet adapter. Note that the panics do not occur in
every system configuration, as they occur only if the receiving netdev
leaves less headroom in its received skbs than the mt7921 needs for its
SDIO headers.
Here is an example stack trace of this panic on Raspberry Pi OS Lite
2023-02-21 running kernel 6.1.24+ [1]:
skb_panic from skb_push+0x44/0x48
skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common]
mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb]
mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76]
__mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76]
mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76]
mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common]
mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76]
__mt76_worker_fn [mt76] from kthread+0xbc/0xe0
kthread from ret_from_fork+0x14/0x34
After this fix, bridging the mt7921 interface works fine on both of my
previously problematic systems.
[1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Handle lock during peer_id find
ath12k_peer_find_by_id() requires that the caller hold the
ab->base_lock. Currently the WBM error path does not hold
the lock and calling that function, leads to the
following lockdep_assert()in QCN9274:
[105162.160893] ------------[ cut here ]------------
[105162.160916] WARNING: CPU: 3 PID: 0 at drivers/net/wireless/ath/ath12k/peer.c:71 ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160933] Modules linked in: ath12k(O) qrtr_mhi qrtr mac80211 cfg80211 mhi qmi_helpers libarc4 nvme nvme_core [last unloaded: ath12k(O)]
[105162.160967] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W O 6.1.0-rc2+ #3
[105162.160972] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0056.2019.0506.1527 05/06/2019
[105162.160977] RIP: 0010:ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160990] Code: 07 eb 0f 39 68 24 74 0a 48 8b 00 48 39 f8 75 f3 31 c0 5b 5d c3 48 8d bf b0 f2 00 00 be ff ff ff ff e8 22 20 c4 e2 85 c0 75 bf <0f> 0b eb bb 66 2e 0f 1f 84 00 00 00 00 00 41 54 4c 8d a7 98 f2 00
[105162.160996] RSP: 0018:ffffa223001acc60 EFLAGS: 00010246
[105162.161003] RAX: 0000000000000000 RBX: ffff9f0573940000 RCX: 0000000000000000
[105162.161008] RDX: 0000000000000001 RSI: ffffffffa3951c8e RDI: ffffffffa39a96d7
[105162.161013] RBP: 000000000000000a R08: 0000000000000000 R09: 0000000000000000
[105162.161017] R10: ffffa223001acb40 R11: ffffffffa3d57c60 R12: ffff9f057394f2e0
[105162.161022] R13: ffff9f0573940000 R14: ffff9f04ecd659c0 R15: ffff9f04d5a9b040
[105162.161026] FS: 0000000000000000(0000) GS:ffff9f0575600000(0000) knlGS:0000000000000000
[105162.161031] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105162.161036] CR2: 00001d5c8277a008 CR3: 00000001e6224006 CR4: 00000000003706e0
[105162.161041] Call Trace:
[105162.161046] <IRQ>
[105162.161051] ath12k_dp_rx_process_wbm_err+0x6da/0xaf0 [ath12k]
[105162.161072] ? ath12k_dp_rx_process_err+0x80e/0x15a0 [ath12k]
[105162.161084] ? __lock_acquire+0x4ca/0x1a60
[105162.161104] ath12k_dp_service_srng+0x263/0x310 [ath12k]
[105162.161120] ath12k_pci_ext_grp_napi_poll+0x1c/0x70 [ath12k]
[105162.161133] __napi_poll+0x22/0x260
[105162.161141] net_rx_action+0x2f8/0x380
[105162.161153] __do_softirq+0xd0/0x4c9
[105162.161162] irq_exit_rcu+0x88/0xe0
[105162.161169] common_interrupt+0xa5/0xc0
[105162.161174] </IRQ>
[105162.161179] <TASK>
[105162.161184] asm_common_interrupt+0x22/0x40
Handle spin lock/unlock in WBM error path to hold the necessary lock
expected by ath12k_peer_find_by_id().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-03171-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: deal with integer overflows in kmalloc_reserve()
Blamed commit changed:
ptr = kmalloc(size);
if (ptr)
size = ksize(ptr);
size = kmalloc_size_roundup(size);
ptr = kmalloc(size);
This allowed various crash as reported by syzbot [1]
and Kyle Zeng.
Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.
kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.
kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.
Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff
We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).
This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.
[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554
CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2. |
| In the Linux kernel, the following vulnerability has been resolved:
md: raid1: fix potential OOB in raid1_remove_disk()
If rddev->raid_disk is greater than mddev->raid_disks, there will be
an out-of-bounds in raid1_remove_disk(). We have already found
similar reports as follows:
1) commit d17f744e883b ("md-raid10: fix KASAN warning")
2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk")
Fix this bug by checking whether the "number" variable is
valid. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix use-after-free in tb_dp_dprx_work
The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(),
which does not ensure that the delayed work item tunnel->dprx_work has
fully completed if it was already running. This leads to use-after-free
scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while
tunnel->dprx_work remains active and attempts to dereference tb_tunnel
in tb_dp_dprx_work().
A typical race condition is illustrated below:
CPU 0 | CPU 1
tb_dp_tunnel_active() |
tb_deactivate_and_free_tunnel()| tb_dp_dprx_start()
tb_tunnel_deactivate() | queue_delayed_work()
tb_dp_activate() |
tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker
cancel_delayed_work() |
tb_tunnel_put(tunnel); |
| tunnel = container_of(...); //UAF
| tunnel-> //UAF
Replacing cancel_delayed_work() with cancel_delayed_work_sync() is
not feasible as it would introduce a deadlock: both tb_dp_dprx_work()
and the cleanup path acquire tb->lock, and cancel_delayed_work_sync()
would wait indefinitely for the work item that cannot proceed.
Instead, implement proper reference counting:
- If cancel_delayed_work() returns true (work is pending), we release
the reference in the stop function.
- If it returns false (work is executing or already completed), the
reference is released in delayed work function itself.
This ensures the tb_tunnel remains valid during work item execution
while preventing memory leaks.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fortify the spinlock against deadlock by interrupt
In the function ieee80211_tx_dequeue() there is a particular locking
sequence:
begin:
spin_lock(&local->queue_stop_reason_lock);
q_stopped = local->queue_stop_reasons[q];
spin_unlock(&local->queue_stop_reason_lock);
However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.
This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.
The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.
This is the probable trace of the deadlock:
kernel: ================================
kernel: WARNING: inconsistent lock state
kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G W
kernel: --------------------------------
kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes:
kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40
kernel: {IN-SOFTIRQ-W} state was registered at:
kernel: lock_acquire+0xc7/0x2d0
kernel: _raw_spin_lock+0x36/0x50
kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm]
kernel: ieee80211_queue_skb+0x450/0x730 [mac80211]
kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211]
kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211]
kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211]
kernel: dev_hard_start_xmit+0xb5/0x260
kernel: __dev_queue_xmit+0xdbe/0x1200
kernel: neigh_resolve_output+0x166/0x260
kernel: ip_finish_output2+0x216/0xb80
kernel: __ip_finish_output+0x2a4/0x4d0
kernel: ip_finish_output+0x2d/0xd0
kernel: ip_output+0x82/0x2b0
kernel: ip_local_out+0xec/0x110
kernel: igmpv3_sendpack+0x5c/0x90
kernel: igmp_ifc_timer_expire+0x26e/0x4e0
kernel: call_timer_fn+0xa5/0x230
kernel: run_timer_softirq+0x27f/0x550
kernel: __do_softirq+0xb4/0x3a4
kernel: irq_exit_rcu+0x9b/0xc0
kernel: sysvec_apic_timer_interrupt+0x80/0xa0
kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30
kernel: _raw_spin_unlock_irqrestore+0x3f/0x70
kernel: free_to_partial_list+0x3d6/0x590
kernel: __slab_free+0x1b7/0x310
kernel: kmem_cache_free+0x52d/0x550
kernel: putname+0x5d/0x70
kernel: do_sys_openat2+0x1d7/0x310
kernel: do_sys_open+0x51/0x80
kernel: __x64_sys_openat+0x24/0x30
kernel: do_syscall_64+0x5c/0x90
kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
kernel: irq event stamp: 5120729
kernel: hardirqs last enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120
kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120
kernel: softirqs last enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel:
other info that might help us debug this:
kernel: Possible unsafe locking scenario:
kernel: CPU0
kernel: ----
kernel: lock(&local->queue_stop_reason_lock);
kernel: <Interrupt>
kernel: lock(&local->queue_stop_reason_lock);
kernel:
*** DEADLOCK ***
kernel: 8 locks held by kworker/5:0/25656:
kernel: #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530
kernel: #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530
kernel: #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #3: ffff9d619
---truncated--- |
| The Qualys Cloud Agent included a bundled uninstall script (qagent_uninstall.sh), specific to Mac and Linux supported versions that invoked multiple system commands without using absolute paths and without sanitizing the $PATH environment. If the uninstall script is executed with elevated privileges (e.g., via sudo) in an environment where $PATH has been manipulated, an attacker with root/sudo privileges could cause malicious executables to be run in place of the intended system binaries. This behavior can be leveraged for local privilege escalation and arbitrary command execution under elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
tee: fix register_shm_helper()
In register_shm_helper(), fix incorrect error handling for a call to
iov_iter_extract_pages(). A case is missing for when
iov_iter_extract_pages() only got some pages and return a number larger
than 0, but not the requested amount.
This fixes a possible NULL pointer dereference following a bad input from
ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
mrp: introduce active flags to prevent UAF when applicant uninit
The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.
And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]
CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x1a8/0x4a0 mm/kasan/report.c:395
kasan_report+0x94/0xb4 mm/kasan/report.c:495
__do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
do_bad_area arch/arm64/mm/fault.c:473 [inline]
do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
hlist_add_head include/linux/list.h:929 [inline]
enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
mod_timer+0x14/0x20 kernel/time/timer.c:1161
mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
expire_timers+0x98/0xc4 kernel/time/timer.c:1519
To fix it, we can introduce a new active flags to make sure the timer will
not restart. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: Delay the unmapping of the buffer
On WCN3990, we are seeing a rare scenario where copy engine hardware is
sending a copy complete interrupt to the host driver while still
processing the buffer that the driver has sent, this is leading into an
SMMU fault triggering kernel panic. This is happening on copy engine
channel 3 (CE3) where the driver normally enqueues WMI commands to the
firmware. Upon receiving a copy complete interrupt, host driver will
immediately unmap and frees the buffer presuming that hardware has
processed the buffer. In the issue case, upon receiving copy complete
interrupt, host driver will unmap and free the buffer but since hardware
is still accessing the buffer (which in this case got unmapped in
parallel), SMMU hardware will trigger an SMMU fault resulting in a
kernel panic.
In order to avoid this, as a work around, add a delay before unmapping
the copy engine source DMA buffer. This is conditionally done for
WCN3990 and only for the CE3 channel where issue is seen.
Below is the crash signature:
wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled
context fault: fsr=0x402, iova=0x7fdfd8ac0,
fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled
context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003,
cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error
received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091:
cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149
remoteproc remoteproc0: crash detected in
4080000.remoteproc: type fatal error <3> remoteproc remoteproc0:
handling crash #1 in 4080000.remoteproc
pc : __arm_lpae_unmap+0x500/0x514
lr : __arm_lpae_unmap+0x4bc/0x514
sp : ffffffc011ffb530
x29: ffffffc011ffb590 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000004
x25: 0000000000000003 x24: ffffffc011ffb890
x23: ffffffa762ef9be0 x22: ffffffa77244ef00
x21: 0000000000000009 x20: 00000007fff7c000
x19: 0000000000000003 x18: 0000000000000000
x17: 0000000000000004 x16: ffffffd7a357d9f0
x15: 0000000000000000 x14: 00fd5d4fa7ffffff
x13: 000000000000000e x12: 0000000000000000
x11: 00000000ffffffff x10: 00000000fffffe00
x9 : 000000000000017c x8 : 000000000000000c
x7 : 0000000000000000 x6 : ffffffa762ef9000
x5 : 0000000000000003 x4 : 0000000000000004
x3 : 0000000000001000 x2 : 00000007fff7c000
x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace:
__arm_lpae_unmap+0x500/0x514
__arm_lpae_unmap+0x4bc/0x514
__arm_lpae_unmap+0x4bc/0x514
arm_lpae_unmap_pages+0x78/0xa4
arm_smmu_unmap_pages+0x78/0x104
__iommu_unmap+0xc8/0x1e4
iommu_unmap_fast+0x38/0x48
__iommu_dma_unmap+0x84/0x104
iommu_dma_free+0x34/0x50
dma_free_attrs+0xa4/0xd0
ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c
[ath10k_core]
ath10k_halt+0x11c/0x180 [ath10k_core]
ath10k_stop+0x54/0x94 [ath10k_core]
drv_stop+0x48/0x1c8 [mac80211]
ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c
[mac80211]
__dev_open+0xb4/0x174
__dev_change_flags+0xc4/0x1dc
dev_change_flags+0x3c/0x7c
devinet_ioctl+0x2b4/0x580
inet_ioctl+0xb0/0x1b4
sock_do_ioctl+0x4c/0x16c
compat_ifreq_ioctl+0x1cc/0x35c
compat_sock_ioctl+0x110/0x2ac
__arm64_compat_sys_ioctl+0xf4/0x3e0
el0_svc_common+0xb4/0x17c
el0_svc_compat_handler+0x2c/0x58
el0_svc_compat+0x8/0x2c
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
SDIO may need addtional 511 bytes to align bus operation. If the tailroom
of this skb is not big enough, we would access invalid memory region.
For low level operation, increase skb size to keep valid memory access in
SDIO host.
Error message:
[69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0
[69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451
[69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W OE 6.1.0-rc5 #1
[69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[69.951] Call Trace:
[69.951] <TASK>
[69.952] dump_stack_lvl+0x49/0x63
[69.952] print_report+0x171/0x4a8
[69.952] kasan_report+0xb4/0x130
[69.952] kasan_check_range+0x149/0x1e0
[69.952] memcpy+0x24/0x70
[69.952] sg_copy_buffer+0xe9/0x1a0
[69.952] sg_copy_to_buffer+0x12/0x20
[69.952] __command_write_data.isra.0+0x23c/0xbf0 [vub300]
[69.952] vub300_cmndwork_thread+0x17f3/0x58b0 [vub300]
[69.952] process_one_work+0x7ee/0x1320
[69.952] worker_thread+0x53c/0x1240
[69.952] kthread+0x2b8/0x370
[69.952] ret_from_fork+0x1f/0x30
[69.952] </TASK>
[69.952] Allocated by task 854:
[69.952] kasan_save_stack+0x26/0x50
[69.952] kasan_set_track+0x25/0x30
[69.952] kasan_save_alloc_info+0x1b/0x30
[69.952] __kasan_kmalloc+0x87/0xa0
[69.952] __kmalloc_node_track_caller+0x63/0x150
[69.952] kmalloc_reserve+0x31/0xd0
[69.952] __alloc_skb+0xfc/0x2b0
[69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76]
[69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76]
[69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76]
[69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib]
[69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib]
[69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common]
[69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s]
[69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common]
[69.953] process_one_work+0x7ee/0x1320
[69.953] worker_thread+0x53c/0x1240
[69.953] kthread+0x2b8/0x370
[69.953] ret_from_fork+0x1f/0x30
[69.953] The buggy address belongs to the object at ffff88811c9ce800
which belongs to the cache kmalloc-2k of size 2048
[69.953] The buggy address is located 0 bytes to the right of
2048-byte region [ffff88811c9ce800, ffff88811c9cf000)
[69.953] Memory state around the buggy address:
[69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ^
[69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: hold region lock when flushing snapshots
Netdevsim triggers a splat on reload, when it destroys regions
with snapshots pending:
WARNING: CPU: 1 PID: 787 at net/core/devlink.c:6291 devlink_region_snapshot_del+0x12e/0x140
CPU: 1 PID: 787 Comm: devlink Not tainted 6.1.0-07460-g7ae9888d6e1c #580
RIP: 0010:devlink_region_snapshot_del+0x12e/0x140
Call Trace:
<TASK>
devl_region_destroy+0x70/0x140
nsim_dev_reload_down+0x2f/0x60 [netdevsim]
devlink_reload+0x1f7/0x360
devlink_nl_cmd_reload+0x6ce/0x860
genl_family_rcv_msg_doit.isra.0+0x145/0x1c0
This is the locking assert in devlink_region_snapshot_del(),
we're supposed to be holding the region->snapshot_lock here. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921e: fix rmmod crash in driver reload test
In insmod/rmmod stress test, the following crash dump shows up immediately.
The problem is caused by missing mt76_dev in mt7921_pci_remove(). We
should make sure the drvdata is ready before probe() finished.
[168.862789] ==================================================================
[168.862797] BUG: KASAN: user-memory-access in try_to_grab_pending+0x59/0x480
[168.862805] Write of size 8 at addr 0000000000006df0 by task rmmod/5361
[168.862812] CPU: 7 PID: 5361 Comm: rmmod Tainted: G OE 5.19.0-rc6 #1
[168.862816] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, 05/04/2020
[168.862820] Call Trace:
[168.862822] <TASK>
[168.862825] dump_stack_lvl+0x49/0x63
[168.862832] print_report.cold+0x493/0x6b7
[168.862845] kasan_report+0xa7/0x120
[168.862857] kasan_check_range+0x163/0x200
[168.862861] __kasan_check_write+0x14/0x20
[168.862866] try_to_grab_pending+0x59/0x480
[168.862870] __cancel_work_timer+0xbb/0x340
[168.862898] cancel_work_sync+0x10/0x20
[168.862902] mt7921_pci_remove+0x61/0x1c0 [mt7921e]
[168.862909] pci_device_remove+0xa3/0x1d0
[168.862914] device_remove+0xc4/0x170
[168.862920] device_release_driver_internal+0x163/0x300
[168.862925] driver_detach+0xc7/0x1a0
[168.862930] bus_remove_driver+0xeb/0x2d0
[168.862935] driver_unregister+0x71/0xb0
[168.862939] pci_unregister_driver+0x30/0x230
[168.862944] mt7921_pci_driver_exit+0x10/0x1b [mt7921e]
[168.862949] __x64_sys_delete_module+0x2f9/0x4b0
[168.862968] do_syscall_64+0x38/0x90
[168.862973] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Test steps:
1. insmode
2. do not ifup
3. rmmod quickly (within 1 second) |
