| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix interrupt synchronization error
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs. |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.5.0 to 2.63.0, an attacker who is able to create or edit an annotation guide on a task is able to add malicious JavaScript code, which will then run in the browser of anyone who opens this annotation guide. This code will be able to make arbitrary requests to CVAT with the victim user's privileges. This vulnerability is fixed in 2.64.0. |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Prior to 1.3.1-stable and 1.3.9-beta, attacker-controlled path input is joined with a trusted base path prior to sanitization, allowing traversal sequences (e.g., ../) to escape the intended shared directory. As a result, an unauthenticated attacker possessing a valid public share hash with delete permissions enabled can delete arbitrary files outside the shared directory within the share owner’s configured storage scope. This affects public/api/resources and public/api/resources/bulk. This vulnerability is fixed in 1.3.1-stable and 1.3.9-beta. |
| Fleet is open source device management software. Prior to version 4.81.0, a vulnerability in Fleet’s Windows MDM management endpoint could allow requests to be processed without proper client certificate validation. In certain circumstances, this could allow an attacker to impersonate an enrolled Windows device and retrieve sensitive configuration data. Fleet’s Windows MDM management endpoint relies on mutual TLS (mTLS) client certificates to authenticate enrolled devices. In affected versions, requests that did not present a client certificate could be incorrectly treated as trusted. As a result, an attacker with prior knowledge of a valid enrolled device identifier could potentially impersonate that device and receive configuration payloads intended for it. These payloads may contain sensitive information such as Wi-Fi or VPN configuration data, certificates, or other secrets delivered through MDM profiles. This issue does not allow enrollment of new devices, administrative access to Fleet, or compromise of the Fleet control plane. Impact is limited to the targeted Windows device. Version 4.81.0 contains a patch. If an immediate upgrade is not possible, affected Fleet users should temporarily disable Windows MDM. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed 32-bit integer overflow in the pixel-loop index expression i * 3 inside ConvertCbYCrYToRGB() causes the function to compute a large negative pointer offset into the output buffer, producing an out-of-bounds write that crashes the process. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| css_parser is a Ruby CSS parser. Prior to 2.1.0 and 1.22.0, the CSS Parser gem does not validate HTTPS connections, allowing a Man-in-the-Middle (MITM) attacker to inject or modify CSS content when stylesheets are loaded via HTTPS. The connection is established with OpenSSL::SSL::VERIFY_NONE, meaning any HTTPS certificate—even entirely untrusted—will be accepted without validation. This vulnerability is fixed in 2.1.0 and 1.22.0. |
| LibJWT is a C JSON Web Token Library. From 3.0.0 to 3.3.2, libjwt accepts an RSA JWK that does not contain an alg parameter as the verification key for an HS256/HS384/HS512 token. In the OpenSSL backend, this causes HMAC verification to run with a zero-length key, so an attacker can forge a valid JWT without knowing any secret or RSA private key. This is an algorithm-confusion authentication bypass. It affects applications that load RSA keys from JWKS where alg is omitted, which is valid JWK syntax and common in real deployments, and then choose the verification algorithm from the JWT header, for example in a kid lookup callback. This vulnerability is fixed in 3.3.3. |
| In the Linux kernel, the following vulnerability has been resolved:
md raid: fix hang when stopping arrays with metadata through dm-raid
When using device-mapper's dm-raid target, stopping a RAID array can cause
the system to hang under specific conditions.
This occurs when:
- A dm-raid managed device tree is suspended from top to bottom
(the top-level RAID device is suspended first, followed by its
underlying metadata and data devices)
- The top-level RAID device is then removed
Removing the top-level device triggers a hang in the following sequence:
the dm-raid destructor calls md_stop(), which tries to flush the
write-intent bitmap by writing to the metadata sub-devices. However, these
devices are already suspended, making them unable to complete the write-intent
operations and causing an indefinite block.
Fix:
- Prevent bitmap flushing when md_stop() is called from dm-raid
destructor context
and avoid a quiescing/unquescing cycle which could also cause I/O
- Still allow write-intent bitmap flushing when called from dm-raid
suspend context
This ensures that RAID array teardown can complete successfully even when the
underlying devices are in a suspended state.
This second patch uses md_is_rdwr() to distinguish between suspend and
destructor paths as elaborated on above. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, MISP Collections did not enforce RFC 4122 UUID validation on the uuid field. As a result, a user able to create or modify Collection records could submit malformed UUID values, potentially causing integrity issues or unexpected behaviour in code paths that assume Collection UUIDs are valid identifiers. This vulnerability is fixed in 2.5.37. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a signed integer overflow in the SIXEL parser's image-buffer doubling loop can lead to an out-of-bounds heap write in sixel_decode_raw_impl. context->pos_x grows by repeat_count on every sixel character with no upper bound check. Once pos_x approaches INT_MAX, the expression "pos_x + repeat_count" used to size the image buffer overflows signed int. Depending on how the overflow wraps, the resize check that should reject oversized buffers can be bypassed, after which a subsequent write computes a large attacker-influenced offset into image->data and writes past the allocation. Reachable from any caller that decodes attacker-supplied SIXEL data, including img2sixel. This vulnerability is fixed in 1.8.7-r2. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a wrong NULL check after an allocation call in sixel_decode_raw and sixel_decode causes a NULL pointer dereference whenever the allocation fails. The check tests the address of the output parameter (always non-NULL) instead of the value the malloc returned. On allocation failure, the function continues and writes through a NULL pointer, crashing the process. This is a denial of service against any caller of these public APIs that hits a low-memory condition. This vulnerability is fixed in 1.8.7-r2. |
| A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system. |
| Inappropriate implementation in Media in Google Chrome on iOS prior to 148.0.7778.168 allowed a remote attacker who had compromised the renderer process to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. Prior to 0.16.0, gitsign verify and gitsign verify-tag re-encode commit/tag objects through go-git's EncodeWithoutSignature before checking the signature, instead of verifying against the raw git object bytes. For malformed objects with duplicate tree headers, git-core and go-git parse different trees: git-core uses the first, go-git uses the second. A signature crafted over the go-git-normalized form (second tree) passes gitsign verify while git-core resolves the commit to a completely different tree. This breaks the invariant that a verified signature, the commit semantics git-core presents to users, and the object hash logged in Rekor all refer to the same content. This vulnerability is fixed in 0.16.0. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, an improper access control vulnerability in the authentication key reset functionality allowed an authenticated organization administrator to reset authentication keys belonging to site administrator accounts within the same organization. Because non-site administrators were not explicitly prevented from accessing or resetting site administrator auth keys, an attacker with organization administrator privileges could potentially obtain a newly generated auth key for a higher-privileged account and use it to escalate privileges. This vulnerability is fixed in 2.5.37. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, a SQL injection vulnerability existed in the handling of user-controlled ordering parameters in the event and shadow attribute listing endpoints. The affected code accepted order or sort values from request parameters and incorporated them into database query ordering clauses without sufficient validation of the requested field name. An attacker with access to the affected endpoints could craft a malicious ordering parameter to manipulate the generated SQL query. Depending on database permissions and query context, this could potentially allow unauthorized access to data, modification of query behavior, or other database-level impact. This vulnerability is fixed in 2.5.37. |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.8.0, SQLBot contains a Cross-Workspace IDOR (Insecure Direct Object Reference) and Authorization Bypass vulnerability in the /api/v1/datasource/exportDsSchema and /api/v1/datasource/uploadDsSchema endpoints. An attacker can access and modify database schemas and data sources belonging to other tenants/workspaces. This vulnerability is fixed in 1.8.0. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, the XMLRPC method opnsense.restore_config_section fails to sanitize user supplied input leading to Remote Code Execution. This vulnerability is fixed in 26.1.7. |
