| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix command ring pointer corruption while aborting a command
The command ring pointer is located at [6:63] bits of the command
ring control register (CRCR). All the control bits like command stop,
abort are located at [0:3] bits. While aborting a command, we read the
CRCR and set the abort bit and write to the CRCR. The read will always
give command ring pointer as all zeros. So we essentially write only
the control bits. Since we split the 64 bit write into two 32 bit writes,
there is a possibility of xHC command ring stopped before the upper
dword (all zeros) is written. If that happens, xHC updates the upper
dword of its internal command ring pointer with all zeros. Next time,
when the command ring is restarted, we see xHC memory access failures.
Fix this issue by only writing to the lower dword of CRCR where all
control bits are located. |
| In the Linux kernel, the following vulnerability has been resolved:
dm btree remove: assign new_root only when removal succeeds
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds |
| Microsoft Streaming Service Elevation of Privilege Vulnerability |
| Windows Kernel-Mode Driver Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
module: ensure that kobject_put() is safe for module type kobjects
In 'lookup_or_create_module_kobject()', an internal kobject is created
using 'module_ktype'. So call to 'kobject_put()' on error handling
path causes an attempt to use an uninitialized completion pointer in
'module_kobject_release()'. In this scenario, we just want to release
kobject without an extra synchronization required for a regular module
unloading process, so adding an extra check whether 'complete()' is
actually required makes 'kobject_put()' safe. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: wdm: close race between wdm_open and wdm_wwan_port_stop
Clearing WDM_WWAN_IN_USE must be the last action or
we can open a chardev whose URBs are still poisoned |
| Memory Corruption in Multi-mode Call Processor while processing bit mask API. |
| Adobe Acrobat Reader versions 23.006.20360 (and earlier) and 20.005.30524 (and earlier) are affected by an Access of Uninitialized Pointer vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Untrusted Pointer Dereference vulnerability in RTI Connext Professional (Core Libraries) allows Pointer Manipulation.This issue affects Connext Professional: from 7.4.0 before 7.6.0, from 7.2.0 before 7.3.0.9. |
| IBM Security Verify Access and IBM Security Verify Access Docker 10.0.0.0 through 10.0.9.0 and 11.0.0.0 through 11.0.1.0
could allow a locally authenticated user to execute malicious scripts from outside of its control sphere. |
| Untrusted Pointer Dereference for some Intel(R) QuickAssist Technology software before version 2.5.0 may allow an authenticated user to potentially enable denial of service via local access. |
| WeasyPrint helps web developers to create PDF documents. Since version 61.0, there's a vulnerability which allows attaching content of arbitrary files and URLs to a generated PDF document, even if `url_fetcher` is configured to prevent access to files and URLs. This vulnerability has been patched in version 61.2. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx95-blk-ctl: Fix synchronous abort
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path. |
| Claude Code is an agentic coding tool. Prior to Claude Code version 1.0.39, when using Claude Code with Yarn versions 2.0+, Yarn plugins are auto-executed when running yarn --version. This could lead to a bypass of the directory trust dialog in Claude Code, as plugins would be executed prior to the user accepting the risks of working in an untrusted directory. Users running Yarn Classic were unaffected by this issue. This issue has been fixed in version 1.0.39. Users on standard Claude Code auto-update will have received this fix automatically. Users performing manual updates are advised to update to the latest version. |
| Untrusted pointer dereference for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow an information disclosure. System software adversary with an authenticated user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Untrusted pointer dereference for some Intel QuickAssist Technology software before version 2.6.0 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable data manipulation. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Versions 0.6.224 and prior contain a code injection vulnerability in the Direct Connections feature that allows malicious external model servers to execute arbitrary JavaScript in victim browsers via Server-Sent Event (SSE) execute events. This leads to authentication token theft, complete account takeover, and when chained with the Functions API, enables remote code execution on the backend server. The attack requires the victim to enable Direct Connections (disabled by default) and add the attacker's malicious model URL, achievable through social engineering of the admin and subsequent users. This issue is fixed in version 0.6.35. |
| A same-origin policy violation allowing the theft of cross-origin URL entries when using the Javascript location property to cause a redirection to another site using performance.getEntries(). This is a same-origin policy violation and could allow for data theft. This vulnerability affects Thunderbird < 60.4, Firefox ESR < 60.4, and Firefox < 64. |
| A mechanism that uses AppCache to hijack a URL in a domain using fallback by serving the files from a sub-path on the domain. This has been addressed by requiring fallback files be inside the manifest directory. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55. |
| On pages containing an iframe, the "data:" protocol can be used to create a modal alert that will render over arbitrary domains following page navigation, spoofing of the origin of the modal alert from the iframe content. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55. |
