| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in bluetoothd in BlueZ through 5.48. The vulnerability lies in the handling of a SVC_ATTR_REQ by the SDP implementation. By crafting a malicious CSTATE, it is possible to trick the server into returning more bytes than the buffer actually holds, resulting in leaking arbitrary heap data. The root cause can be found in the function service_attr_req of sdpd-request.c. The server does not check whether the CSTATE data is the same in consecutive requests, and instead simply trusts that it is the same. |
| The The Plus Addons for Elementor – Addons for Elementor, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.4.7. This is due to the plugin decrypting and trusting attacker-controlled email_data in an unauthenticated AJAX handler without cryptographic authenticity guarantees. This makes it possible for unauthenticated attackers to tamper with form email routing and redirection values to trigger unauthorized email relay and attacker-controlled redirection via the 'email_data' parameter. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
| A vulnerability has been identified within Rancher Manager whereby the SAML authentication from the Rancher CLI tool is vulnerable to phishing attacks. The custom authentication protocol for SAML-based providers can be abused to steal Rancher’s authentication tokens. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, any contact may forge a sync message, impersonating another device of the local user. The origin of sync messages is not checked. Patched libsignal-service can be found after commit 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| CMSaaSStarter is a SaaS template/boilerplate built with SvelteKit, Tailwind, and Supabase. Any forks of the CMSaaSStarter template before commit 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 are impacted. The issue is the user JWT Token is not verified on server session. You should take the patch 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 into your fork.
|
| Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| Insufficient Verification of Data Authenticity vulnerability in GE Vernova UR IED family devices allows an authenticated user to install a modified firmware.
The firmware signature verification is enforced only on the client-side dedicated software Enervista UR Setup, allowing the integration check to be bypassed. |
