| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Rule: add |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Fix ToCToU between perm check and set-uid/gid usage
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal. |
| In the Linux kernel, the following vulnerability has been resolved:
dma: fix call order in dmam_free_coherent
dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.
If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.
Fix by destroying the devres entry before freeing the DMA
allocation.
kokonut //net/encryption
http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: Fix race condition in netpoll_owner_active
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg
A data-race condition has been identified in af_unix. In one data path,
the write function unix_release_sock() atomically writes to
sk->sk_shutdown using WRITE_ONCE. However, on the reader side,
unix_stream_sendmsg() does not read it atomically. Consequently, this
issue is causing the following KCSAN splat to occur:
BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg
write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28:
unix_release_sock (net/unix/af_unix.c:640)
unix_release (net/unix/af_unix.c:1050)
sock_close (net/socket.c:659 net/socket.c:1421)
__fput (fs/file_table.c:422)
__fput_sync (fs/file_table.c:508)
__se_sys_close (fs/open.c:1559 fs/open.c:1541)
__x64_sys_close (fs/open.c:1541)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14:
unix_stream_sendmsg (net/unix/af_unix.c:2273)
__sock_sendmsg (net/socket.c:730 net/socket.c:745)
____sys_sendmsg (net/socket.c:2584)
__sys_sendmmsg (net/socket.c:2638 net/socket.c:2724)
__x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x01 -> 0x03
The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7").
Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.")
addressed a comparable issue in the past regarding sk->sk_shutdown.
However, it overlooked resolving this particular data path.
This patch only offending unix_stream_sendmsg() function, since the
other reads seem to be protected by unix_state_lock() as discussed in |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
TCP_SYN_RECV state is really special, it is only used by
cross-syn connections, mostly used by fuzzers.
In the following crash [1], syzbot managed to trigger a divide
by zero in tcp_rcv_space_adjust()
A socket makes the following state transitions,
without ever calling tcp_init_transfer(),
meaning tcp_init_buffer_space() is also not called.
TCP_CLOSE
connect()
TCP_SYN_SENT
TCP_SYN_RECV
shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN)
TCP_FIN_WAIT1
To fix this issue, change tcp_shutdown() to not
perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition,
which makes no sense anyway.
When tcp_rcv_state_process() later changes socket state
from TCP_SYN_RECV to TCP_ESTABLISH, then look at
sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state,
and send a FIN packet from a sane socket state.
This means tcp_send_fin() can now be called from BH
context, and must use GFP_ATOMIC allocations.
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767
Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48
RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246
RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7
R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30
R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da
FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513
tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578
inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1068
____sys_recvmsg+0x1db/0x470 net/socket.c:2803
___sys_recvmsg net/socket.c:2845 [inline]
do_recvmmsg+0x474/0xae0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7faeb6363db9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: cdev: Fix use after free in lineinfo_changed_notify
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
FFS based applications can utilize the aio_cancel() callback to dequeue
pending USB requests submitted to the UDC. There is a scenario where the
FFS application issues an AIO cancel call, while the UDC is handling a
soft disconnect. For a DWC3 based implementation, the callstack looks
like the following:
DWC3 Gadget FFS Application
dwc3_gadget_soft_disconnect() ...
--> dwc3_stop_active_transfers()
--> dwc3_gadget_giveback(-ESHUTDOWN)
--> ffs_epfile_async_io_complete() ffs_aio_cancel()
--> usb_ep_free_request() --> usb_ep_dequeue()
There is currently no locking implemented between the AIO completion
handler and AIO cancel, so the issue occurs if the completion routine is
running in parallel to an AIO cancel call coming from the FFS application.
As the completion call frees the USB request (io_data->req) the FFS
application is also referencing it for the usb_ep_dequeue() call. This can
lead to accessing a stale/hanging pointer.
commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently")
relocated the usb_ep_free_request() into ffs_epfile_async_io_complete().
However, in order to properly implement locking to mitigate this issue, the
spinlock can't be added to ffs_epfile_async_io_complete(), as
usb_ep_dequeue() (if successfully dequeuing a USB request) will call the
function driver's completion handler in the same context. Hence, leading
into a deadlock.
Fix this issue by moving the usb_ep_free_request() back to
ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req
to NULL after freeing it within the ffs->eps_lock. This resolves the race
condition above, as the ffs_aio_cancel() routine will not continue
attempting to dequeue a request that has already been freed, or the
ffs_user_copy_work() not freeing the USB request until the AIO cancel is
done referencing it.
This fix depends on
commit b566d38857fc ("usb: gadget: f_fs: use io_data->status
consistently") |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix vf may be used uninitialized in this function warning
To fix the regression introduced by commit 52424f974bc5, which causes
servers hang in very hard to reproduce conditions with resets races.
Using two sources for the information is the root cause.
In this function before the fix bumping v didn't mean bumping vf
pointer. But the code used this variables interchangeably, so stale vf
could point to different/not intended vf.
Remove redundant "v" variable and iterate via single VF pointer across
whole function instead to guarantee VF pointer validity. |
| In the Linux kernel, the following vulnerability has been resolved:
block: prevent division by zero in blk_rq_stat_sum()
The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.
Found by Linux Verification Center (linuxtesting.org) with Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
fbmon: prevent division by zero in fb_videomode_from_videomode()
The expression htotal * vtotal can have a zero value on
overflow. It is necessary to prevent division by zero like in
fb_var_to_videomode().
Found by Linux Verification Center (linuxtesting.org) with Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: flush pending destroy work before exit_net release
Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy
work before netlink notifier") to address a race between exit_net and
the destroy workqueue.
The trace below shows an element to be released via destroy workqueue
while exit_net path (triggered via module removal) has already released
the set that is used in such transaction.
[ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465
[ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359
[ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 1360.547984] Call Trace:
[ 1360.547991] <TASK>
[ 1360.547998] dump_stack_lvl+0x53/0x70
[ 1360.548014] print_report+0xc4/0x610
[ 1360.548026] ? __virt_addr_valid+0xba/0x160
[ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548176] kasan_report+0xae/0xe0
[ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables]
[ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30
[ 1360.548591] process_one_work+0x2f1/0x670
[ 1360.548610] worker_thread+0x4d3/0x760
[ 1360.548627] ? __pfx_worker_thread+0x10/0x10
[ 1360.548640] kthread+0x16b/0x1b0
[ 1360.548653] ? __pfx_kthread+0x10/0x10
[ 1360.548665] ret_from_fork+0x2f/0x50
[ 1360.548679] ? __pfx_kthread+0x10/0x10
[ 1360.548690] ret_from_fork_asm+0x1a/0x30
[ 1360.548707] </TASK>
[ 1360.548719] Allocated by task 192061:
[ 1360.548726] kasan_save_stack+0x20/0x40
[ 1360.548739] kasan_save_track+0x14/0x30
[ 1360.548750] __kasan_kmalloc+0x8f/0xa0
[ 1360.548760] __kmalloc_node+0x1f1/0x450
[ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables]
[ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink]
[ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.548927] netlink_unicast+0x367/0x4f0
[ 1360.548935] netlink_sendmsg+0x34b/0x610
[ 1360.548944] ____sys_sendmsg+0x4d4/0x510
[ 1360.548953] ___sys_sendmsg+0xc9/0x120
[ 1360.548961] __sys_sendmsg+0xbe/0x140
[ 1360.548971] do_syscall_64+0x55/0x120
[ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 1360.548994] Freed by task 192222:
[ 1360.548999] kasan_save_stack+0x20/0x40
[ 1360.549009] kasan_save_track+0x14/0x30
[ 1360.549019] kasan_save_free_info+0x3b/0x60
[ 1360.549028] poison_slab_object+0x100/0x180
[ 1360.549036] __kasan_slab_free+0x14/0x30
[ 1360.549042] kfree+0xb6/0x260
[ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables]
[ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables]
[ 1360.549221] ops_exit_list+0x50/0xa0
[ 1360.549229] free_exit_list+0x101/0x140
[ 1360.549236] unregister_pernet_operations+0x107/0x160
[ 1360.549245] unregister_pernet_subsys+0x1c/0x30
[ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables]
[ 1360.549345] __do_sys_delete_module+0x253/0x370
[ 1360.549352] do_syscall_64+0x55/0x120
[ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d
(gdb) list *__nft_release_table+0x473
0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354).
11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) {
11350 list_del(&flowtable->list);
11351 nft_use_dec(&table->use);
11352 nf_tables_flowtable_destroy(flowtable);
11353 }
11354 list_for_each_entry_safe(set, ns, &table->sets, list) {
11355 list_del(&set->list);
11356 nft_use_dec(&table->use);
11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT))
11358 nft_map_deactivat
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can
concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable().
And thhere is not any protection when iterate over nf_tables_flowtables
list in __nft_flowtable_type_get(). Therefore, there is pertential
data-race of nf_tables_flowtables list entry.
Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list
in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller
nft_flowtable_type_get() to protect the entire type query process. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
to avoid racing with checkpoint, otherwise, filesystem metadata including
blkaddr in dnode, inode fields and .total_valid_block_count may be
corrupted after SPO case. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: Fix data-races around sysctl_net_busy_read
We need to protect the reader reading the sysctl value because the
value can be changed concurrently. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values
in the ATA ID information to calculate cylinder and head values when
creating a CDB for READ or WRITE commands. The calculation involves
division and modulus operations, which will cause a crash if either of
these values is 0. While this never happens with a genuine device, it
could happen with a flawed or subversive emulation, as reported by the
syzbot fuzzer.
Protect against this possibility by refusing to bind to the device if
either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID
information is 0. This requires isd200_Initialization() to return a
negative error code when initialization fails; currently it always
returns 0 (even when there is an error). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()
nft_unregister_expr() can concurrent with __nft_expr_type_get(),
and there is not any protection when iterate over nf_tables_expressions
list in __nft_expr_type_get(). Therefore, there is potential data-race
of nf_tables_expressions list entry.
Use list_for_each_entry_rcu() to iterate over nf_tables_expressions
list in __nft_expr_type_get(), and use rcu_read_lock() in the caller
nft_expr_type_get() to protect the entire type query process. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - resolve race condition during AER recovery
During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.
This results in a KFENCE bug notice.
BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
adf_device_reset_worker+0x38/0xa0 [intel_qat]
process_one_work+0x173/0x340
To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function. |
