| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: Fix a deadlock in the error handler
The following deadlock has been observed on a test setup:
- All tags allocated
- The SCSI error handler calls ufshcd_eh_host_reset_handler()
- ufshcd_eh_host_reset_handler() queues work that calls
ufshcd_err_handler()
- ufshcd_err_handler() locks up as follows:
Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
__switch_to+0x298/0x5d8
__schedule+0x6cc/0xa94
schedule+0x12c/0x298
blk_mq_get_tag+0x210/0x480
__blk_mq_alloc_request+0x1c8/0x284
blk_get_request+0x74/0x134
ufshcd_exec_dev_cmd+0x68/0x640
ufshcd_verify_dev_init+0x68/0x35c
ufshcd_probe_hba+0x12c/0x1cb8
ufshcd_host_reset_and_restore+0x88/0x254
ufshcd_reset_and_restore+0xd0/0x354
ufshcd_err_handler+0x408/0xc58
process_one_work+0x24c/0x66c
worker_thread+0x3e8/0xa4c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request. |
| A denial of service vulnerability was found in tipc_crypto_key_revoke in net/tipc/crypto.c in the Linux kernel’s TIPC subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Don't register LEDs for genphy
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix deadlock in ivpu_ms_cleanup()
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.
During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.
CPU0 CPU1
---- ----
mcp251x_open()
mutex_lock(&priv->mcp_lock)
request_threaded_irq()
<interrupt>
mcp251x_can_ist()
mutex_lock(&priv->mcp_lock)
mcp251x_hw_wake()
disable_irq() <-- deadlock
Use disable_irq_nosync() instead because the interrupt handler does
everything while holding the mutex so it doesn't matter if it's still
running. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't evict inode under the inode lru traversing context
The inode reclaiming process(See function prune_icache_sb) collects all
reclaimable inodes and mark them with I_FREEING flag at first, at that
time, other processes will be stuck if they try getting these inodes
(See function find_inode_fast), then the reclaiming process destroy the
inodes by function dispose_list(). Some filesystems(eg. ext4 with
ea_inode feature, ubifs with xattr) may do inode lookup in the inode
evicting callback function, if the inode lookup is operated under the
inode lru traversing context, deadlock problems may happen.
Case 1: In function ext4_evict_inode(), the ea inode lookup could happen
if ea_inode feature is enabled, the lookup process will be stuck
under the evicting context like this:
1. File A has inode i_reg and an ea inode i_ea
2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea
3. Then, following three processes running like this:
PA PB
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// i_reg is added into lru, lru->i_ea->i_reg
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
i_ea->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(i_reg)
spin_unlock(&i_reg->i_lock)
spin_unlock(lru_lock)
rm file A
i_reg->nlink = 0
iput(i_reg) // i_reg->nlink is 0, do evict
ext4_evict_inode
ext4_xattr_delete_inode
ext4_xattr_inode_dec_ref_all
ext4_xattr_inode_iget
ext4_iget(i_ea->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(i_ea) ----→ AA deadlock
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&i_ea->i_state)
Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file
deleting process holds BASEHD's wbuf->io_mutex while getting the
xattr inode, which could race with inode reclaiming process(The
reclaiming process could try locking BASEHD's wbuf->io_mutex in
inode evicting function), then an ABBA deadlock problem would
happen as following:
1. File A has inode ia and a xattr(with inode ixa), regular file B has
inode ib and a xattr.
2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa
3. Then, following three processes running like this:
PA PB PC
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// ib and ia are added into lru, lru->ixa->ib->ia
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
ixa->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(ib)
spin_unlock(&ib->i_lock)
spin_unlock(lru_lock)
rm file B
ib->nlink = 0
rm file A
iput(ia)
ubifs_evict_inode(ia)
ubifs_jnl_delete_inode(ia)
ubifs_jnl_write_inode(ia)
make_reservation(BASEHD) // Lock wbuf->io_mutex
ubifs_iget(ixa->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(ixa)
| iput(ib) // ib->nlink is 0, do evict
| ubifs_evict_inode
| ubifs_jnl_delete_inode(ib)
↓ ubifs_jnl_write_inode
ABBA deadlock ←-----make_reservation(BASEHD)
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&ixa->i_state)
Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING
to pin the inode in memory while inode_lru_isolate(
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix a deadlock problem when config TC during resetting
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a deadlock in dma buf fence polling
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix deadlock between mddev_suspend and flush bio
Deadlock occurs when mddev is being suspended while some flush bio is in
progress. It is a complex issue.
T1. the first flush is at the ending stage, it clears 'mddev->flush_bio'
and tries to submit data, but is blocked because mddev is suspended
by T4.
T2. the second flush sets 'mddev->flush_bio', and attempts to queue
md_submit_flush_data(), which is already running (T1) and won't
execute again if on the same CPU as T1.
T3. the third flush inc active_io and tries to flush, but is blocked because
'mddev->flush_bio' is not NULL (set by T2).
T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc
by T3.
T1 T2 T3 T4
(flush 1) (flush 2) (third 3) (suspend)
md_submit_flush_data
mddev->flush_bio = NULL;
.
. md_flush_request
. mddev->flush_bio = bio
. queue submit_flushes
. .
. . md_handle_request
. . active_io + 1
. . md_flush_request
. . wait !mddev->flush_bio
. .
. . mddev_suspend
. . wait !active_io
. .
. submit_flushes
. queue_work md_submit_flush_data
. //md_submit_flush_data is already running (T1)
.
md_handle_request
wait resume
The root issue is non-atomic inc/dec of active_io during flush process.
active_io is dec before md_submit_flush_data is queued, and inc soon
after md_submit_flush_data() run.
md_flush_request
active_io + 1
submit_flushes
active_io - 1
md_submit_flush_data
md_handle_request
active_io + 1
make_request
active_io - 1
If active_io is dec after md_handle_request() instead of within
submit_flushes(), make_request() can be called directly intead of
md_handle_request() in md_submit_flush_data(), and active_io will
only inc and dec once in the whole flush process. Deadlock will be
fixed.
Additionally, the only difference between fixing the issue and before is
that there is no return error handling of make_request(). But after
previous patch cleaned md_write_start(), make_requst() only return error
in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456,
md/raid456: fix a deadlock for dm-raid456 while io concurrent with
reshape)". Since dm always splits data and flush operation into two
separate io, io size of flush submitted by dm always is 0, make_request()
will not be called in md_submit_flush_data(). To prevent future
modifications from introducing issues, add WARN_ON to ensure
make_request() no error is returned in this context. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event
in process context") removed the process context workqueue from
amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove
its overhead.
With RME Fireface 800, this lead to a regression since
Kernels 5.14.0, causing an AB/BA deadlock competition for the
substream lock with eventual system freeze under ALSA operation:
thread 0:
* (lock A) acquire substream lock by
snd_pcm_stream_lock_irq() in
snd_pcm_status64()
* (lock B) wait for tasklet to finish by calling
tasklet_unlock_spin_wait() in
tasklet_disable_in_atomic() in
ohci_flush_iso_completions() of ohci.c
thread 1:
* (lock B) enter tasklet
* (lock A) attempt to acquire substream lock,
waiting for it to be released:
snd_pcm_stream_lock_irqsave() in
snd_pcm_period_elapsed() in
update_pcm_pointers() in
process_ctx_payloads() in
process_rx_packets() of amdtp-stream.c
? tasklet_unlock_spin_wait
</NMI>
<TASK>
ohci_flush_iso_completions firewire_ohci
amdtp_domain_stream_pcm_pointer snd_firewire_lib
snd_pcm_update_hw_ptr0 snd_pcm
snd_pcm_status64 snd_pcm
? native_queued_spin_lock_slowpath
</NMI>
<IRQ>
_raw_spin_lock_irqsave
snd_pcm_period_elapsed snd_pcm
process_rx_packets snd_firewire_lib
irq_target_callback snd_firewire_lib
handle_it_packet firewire_ohci
context_tasklet firewire_ohci
Restore the process context work queue to prevent deadlock
AB/BA deadlock competition for ALSA substream lock of
snd_pcm_stream_lock_irq() in snd_pcm_status64()
and snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed().
revert commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period
elapse event in process context")
Replace inline description to prevent future deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system
to enter suspend status with below command:
echo mem > /sys/power/state
There will be a deadlock issue occurring. Detailed invoking path as
below:
dwc3_suspend_common()
spin_lock_irqsave(&dwc->lock, flags); <-- 1st
dwc3_gadget_suspend(dwc);
dwc3_gadget_soft_disconnect(dwc);
spin_lock_irqsave(&dwc->lock, flags); <-- 2nd
This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix
NULL pointer dereference in dwc3_gadget_suspend") that removes the code
of checking whether dwc->gadget_driver is NULL or not. It causes the
following code is executed and deadlock occurs when trying to get the
spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3:
Remove DWC3 locking during gadget suspend/resume") that forgot to remove
the lock of otg mode. So, remove the redundant lock of otg mode during
gadget suspend/resume. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Fix deadlock with the SPI chip variant
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
call trace:
queued_spin_lock_slowpath+0x100/0x284
do_raw_spin_lock+0x34/0x44
ks8851_start_xmit_spi+0x30/0xb8
ks8851_start_xmit+0x14/0x20
netdev_start_xmit+0x40/0x6c
dev_hard_start_xmit+0x6c/0xbc
sch_direct_xmit+0xa4/0x22c
__qdisc_run+0x138/0x3fc
qdisc_run+0x24/0x3c
net_tx_action+0xf8/0x130
handle_softirqs+0x1ac/0x1f0
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x3c/0x58
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x54/0x9c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
__netif_schedule+0x6c/0x80
netif_tx_wake_queue+0x38/0x48
ks8851_irq+0xb8/0x2c8
irq_thread_fn+0x2c/0x74
irq_thread+0x10c/0x1b0
kthread+0xc8/0xd8
ret_from_fork+0x10/0x20
This issue has not been identified earlier because tests were done on
a device with SMP disabled and so spinlocks were actually NOPs.
Now use spin_(un)lock_bh for TX queue related locking to avoid execution
of softirq work synchronously that would lead to a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: remove .ndo_poll_controller to avoid deadlocks
There is a deadlock issue found in sungem driver, please refer to the
commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid
deadlocks"). The root cause of the issue is that netpoll is in atomic
context and disable_irq() is called by .ndo_poll_controller interface
of sungem driver, however, disable_irq() might sleep. After analyzing
the implementation of fec_poll_controller(), the fec driver should have
the same issue. Due to the fec driver uses NAPI for TX completions, the
.ndo_poll_controller is unnecessary to be implemented in the fec driver,
so fec_poll_controller() can be safely removed. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: xilinx_uartps: split sysrq handling
lockdep detects the following circular locking dependency:
CPU 0 CPU 1
========================== ============================
cdns_uart_isr() printk()
uart_port_lock(port) console_lock()
cdns_uart_console_write()
if (!port->sysrq)
uart_port_lock(port)
uart_handle_break()
port->sysrq = ...
uart_handle_sysrq_char()
printk()
console_lock()
The fixed commit attempts to avoid this situation by only taking the
port lock in cdns_uart_console_write if port->sysrq unset. However, if
(as shown above) cdns_uart_console_write runs before port->sysrq is set,
then it will try to take the port lock anyway. This may result in a
deadlock.
Fix this by splitting sysrq handling into two parts. We use the prepare
helper under the port lock and defer handling until we release the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix soft lockups in fib6_select_path under high next hop churn
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
A deadlock may happen since the i3c_master_register() acquires
&i3cbus->lock twice. See the log below.
Use i3cdev->desc->info instead of calling i3c_device_info() to
avoid acquiring the lock twice.
v2:
- Modified the title and commit message
============================================
WARNING: possible recursive locking detected
6.11.0-mainline
--------------------------------------------
init/1 is trying to acquire lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock
but task is already holding lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&i3cbus->lock);
lock(&i3cbus->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by init/1:
#0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach
#1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
stack backtrace:
CPU: 6 UID: 0 PID: 1 Comm: init
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc0
dump_stack+0x18/0x24
print_deadlock_bug+0x388/0x390
__lock_acquire+0x18bc/0x32ec
lock_acquire+0x134/0x2b0
down_read+0x50/0x19c
i3c_bus_normaluse_lock+0x14/0x24
i3c_device_get_info+0x24/0x58
i3c_device_uevent+0x34/0xa4
dev_uevent+0x310/0x384
kobject_uevent_env+0x244/0x414
kobject_uevent+0x14/0x20
device_add+0x278/0x460
device_register+0x20/0x34
i3c_master_register_new_i3c_devs+0x78/0x154
i3c_master_register+0x6a0/0x6d4
mtk_i3c_master_probe+0x3b8/0x4d8
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa0/0x15c
driver_probe_device+0x3c/0x1ac
__driver_attach+0xc4/0x1f0
bus_for_each_dev+0x104/0x160
driver_attach+0x24/0x34
bus_add_driver+0x14c/0x294
driver_register+0x68/0x104
__platform_driver_register+0x20/0x30
init_module+0x20/0xfe4
do_one_initcall+0x184/0x464
do_init_module+0x58/0x1ec
load_module+0xefc/0x10c8
__arm64_sys_finit_module+0x238/0x33c
invoke_syscall+0x58/0x10c
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x50/0xac
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1a8/0x1ac |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix deadlock on SRQ async events.
xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/
xa_erase_irq() to avoid deadlock. |
