| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uncontrolled search path in some software installer for some VTune(TM) Profiler software and Intel(R) oneAPI Base Toolkits before version 2025.0. within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Uncontrolled search path element for some Intel(R) Network Adapter Driver installers for Windows 11 before version 29.4 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A vulnerability in the health monitoring diagnostics of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, adjacent attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames. An attacker could exploit this vulnerability by sending a sustained rate of crafted Ethernet frames to an affected device. A successful exploit could allow the attacker to cause the device to reload. |
| A vulnerability in multiple Cisco Unified Communications and Contact Center Solutions products could allow an authenticated, local attacker to elevate privileges to root on an affected device.
This vulnerability is due to excessive permissions that have been assigned to system commands. An attacker could exploit this vulnerability by executing crafted commands on the underlying operating system. A successful exploit could allow the attacker to escape the restricted shell and gain root privileges on the underlying operating system of an affected device. To successfully exploit this vulnerability, an attacker would need administrative access to the ESXi hypervisor. |
| A vulnerability in the GUI of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device.
This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload using the Cisco ISE GUI. A successful exploit could allow the attacker to upload arbitrary files to an affected system. |
| A vulnerability in the management and VPN web servers of the Remote Access SSL VPN feature of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly stop responding, resulting in a DoS condition.
This vulnerability is due to ineffective validation of user-supplied input during the Remote Access SSL VPN authentication process. An attacker could exploit this vulnerability by sending a crafted request to the VPN service on an affected device. A successful exploit could allow the attacker to cause a DoS condition where the device stops responding to Remote Access SSL VPN authentication requests. |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| Improper access control in Routines prior to version 4.8.7.1 in Android 15 and 4.9.6.0 in Android 16 allows local attackers to potentially execute arbitrary code with SystemUI privilege. |
| A vulnerability in the CLI of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a buffer overflow. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| A vulnerability in the software upgrade process of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker with valid Administrator credentials to execute a command injection attack on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of specific elements within a software image. An attacker could exploit this vulnerability by installing a crafted image. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.
Note: Administrators should validate the hash of any software image before installation. |
| A vulnerability in the Cisco Industrial Ethernet Switch Device Manager (DM) of Cisco IOS Software could allow an authenticated, remote attacker to elevate privileges.
This vulnerability is due to insufficient validation of authorizations for authenticated users. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to elevate privileges to privilege level 15.
To exploit this vulnerability, the attacker must have valid credentials for a user account with privilege level 5 or higher. Read-only DM users are assigned privilege level 5. |
| Uncontrolled search path for some Intel(R) oneAPI DPC++/C++ Compiler software before version 2025.0.1 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A vulnerability in the web-based management interface of Cisco Expressway Series could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: Cisco Expressway Series refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. |
| A vulnerability in the Switch Integrated Security Features (SISF) of Cisco IOS Software, Cisco IOS XE Software, Cisco NX-OS Software, and Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to the incorrect handling of DHCPv6 packets. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability.
This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload. |
| A vulnerability in Simple Network Management Protocol (SNMP) polling for Cisco Secure Email and Web Manager, Cisco Secure Email Gateway, and Cisco Secure Web Appliance could allow an authenticated, remote attacker to obtain confidential information about the underlying operating system.
This vulnerability exists because the appliances do not protect confidential information at rest in response to SNMP poll requests. An attacker could exploit this vulnerability by sending a crafted SNMP poll request to the affected appliance. A successful exploit could allow the attacker to discover confidential information that should be restricted. To exploit this vulnerability, an attacker must have the configured SNMP credentials. |
