| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Prime95 29.4b7 contains a buffer overflow vulnerability in the PrimeNet connection dialog that allows local attackers to crash the application by supplying an excessively long string in the optional proxy password field. Attackers can trigger a denial of service by entering a 6000-byte payload into the proxy password parameter, causing the application to crash when processing the connection settings. |
| The asset dependency graph did not restrict nodes by the viewer's DAG read permissions: a user with read access to at least one DAG could browse the asset graph for any other asset in the deployment and learn the existence and names of DAGs and assets outside their authorized scope.
Users are recommended to upgrade to version 3.2.1, which fixes this issue. |
| The authenticated /ui/dags endpoint did not enforce per-DAG access control on embedded Human-in-the-Loop (HITL) and TaskInstance records: a logged-in Airflow user with read access to at least one DAG could retrieve HITL prompts (including their request parameters) and full TaskInstance details for DAGs outside their authorized scope. Because HITL prompts and TaskInstance fields routinely carry operator parameters and free-form context attached to a task, the leak widens visibility of DAG-run data beyond the intended per-DAG RBAC boundary for every authenticated user.
Users are recommended to upgrade to version 3.2.1 , which fixes this issue. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 8u481, 8u481-b50, 8u481-perf, 11.0.30, 17.0.18, 21.0.10, 25.0.2, 26; Oracle GraalVM for JDK: 17.0.18 and 21.0.10; Oracle GraalVM Enterprise Edition: 21.3.17. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| HCL AION is affected by a Cookie with Insecure, Improper, or Missing SameSite vulnerability. This can allow cookies to be sent in cross-site requests, potentially increasing exposure to cross-site request forgery and related security risks. This issue affects AION: 2.0. |
| Out-of-bounds read in Windows Encrypting File System (EFS) allows an authorized attacker to elevate privileges locally. |
| Microsoft Local Security Authority Subsystem Service Information Disclosure Vulnerability |
| Heap-based buffer overflow in Windows Hyper-V allows an unauthorized attacker to execute code locally. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Correct speculative safety in fred_extint()
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access. |
| Potential read out of bounds case with wolfSSHd on Windows while handling a terminal resize request. An authenticated user could trigger the out of bounds read after establishing a connection which would leak the adjacent stack memory to the pseudo-console output. |
| A rogue backend can send a crafted UDP response with a query ID off by one related to the maximum configured value, triggering an out-of-bounds write leading to a denial of service. |
| A rogue backend can send a crafted SVCB response to a Discovery of Designated Resolvers request, when requested via either the autoUpgrade (Lua) option to newServer or auto_upgrade (YAML) settings. DDR upgrade is not enabled by default. |
| A cached crafted response can cause an out-of-bounds read if custom Lua code calls getDomainListByAddress() or getAddressListByDomain() on a packet cache. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix side-effect bug in match_char() macro usage
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop. |
| Issue summary: Applications using AES-CFB128 encryption or decryption on
systems with AVX-512 and VAES support can trigger an out-of-bounds read
of up to 15 bytes when processing partial cipher blocks.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not written to output.
The vulnerable code path is only reached when processing partial blocks
(when a previous call left an incomplete block and the current call provides
fewer bytes than needed to complete it). Additionally, the input buffer
must be positioned at a page boundary with the following page unmapped.
CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or
ChaCha20-Poly1305 instead. For these reasons the issue was assessed as
Low severity according to our Security Policy.
Only x86-64 systems with AVX-512 and VAES instruction support are affected.
Other architectures and systems without VAES support use different code
paths that are not affected.
OpenSSL FIPS module in 3.6 version is affected by this issue. |
| A security flaw has been discovered in UTT HiPER 1250GW up to 3.2.7-210907-180535. The impacted element is an unknown function of the file /goform/formRemoteControl. The manipulation of the argument Profile results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
