| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities. |
| A NULL pointer dereference in the ctts_box_write function (isomedia/box_code_base.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A NULL pointer dereference in the gf_odf_vvc_cfg_write_bs function (odf/descriptors.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A NULL pointer dereference in the gf_isom_get_user_data_count function (isomedia/isom_read.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A segmentation violaton in the gf_hevc_read_sps_bs_internal function (media_tools/av_parsers.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying crafted HEVC SPS data. |
| A stack buffer overflow in the filein_process function (in_file.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| ** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the LAN to execute operating system (OS) commands on a vulnerable device by sending a crafted HTTP request. |
| ApostropheCMS is an open-source Node.js content management system. Versions of the @apostrophecms/cli package up to and including 3.6.0 contain a command injection vulnerability in the apos create command. User-supplied input from the password prompt is embedded directly into a shell command without proper sanitization or escaping. This allows execution of arbitrary commands on the host system. As of time of publication, no known patched versions are available. |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 4.29.0 have a password reset flow that constructs the reset URL using `req.hostname`, which is derived directly from the attacker-controlled HTTP `Host` header when `apos.baseUrl` is not explicitly configured. An unauthenticated attacker who knows a victim's email address can send a crafted reset request that causes the application to email the victim a reset link pointing to the attacker's domain. When the victim clicks the link, the valid reset token is delivered to the attacker, enabling full account takeover. As of time of publication, no known patched versions are available. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.4.0 to before version 2.0.8, nezha's dashboard supports two user roles: RoleAdmin (Role==0) and RoleMember (Role==1). The notification routes POST /api/v1/notification and PATCH /api/v1/notification/:id are wired through commonHandler rather than adminHandler — so a RoleMember user can call them. These handlers synchronously Send() an HTTP request to a user-controlled URL and reflect the entire response body (no size limit) back to the caller on any non-2xx response. This issue has been patched in version 2.0.8. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.0.0 to before version 2.0.14, cross-site GET request can trigger stored cron commands on a victim's agents. This issue has been patched in version 2.0.14. |
| Capgo before 12.128.2 fails to delete previously uploaded profile images from backend storage when users replace or remove them. Attackers can access orphaned image files through previously generated URLs, allowing unauthorized retrieval of user-uploaded content. |
| The WP Ticket plugin for WordPress is vulnerable to SQL Injection via the WordPress search query parameter (`s`) in versions up to, and including, 6.0.4 The plugin hooks WordPress's `posts_request` filter with `wp_ticket_com_posts_request()`, which calls `emd_author_search_results()` when the current request is an unauthenticated front-end search. That function reads `$query->query_vars['s']` — already wp_unslash()'d by `WP_Query::parse_query()`, so wp_magic_quotes protection has been stripped — and concatenates the raw value into a SQL `LIKE` clause inside a UNION sub-SELECT appended to the main query, with no `$wpdb->prepare()` or escaping. This makes it possible for unauthenticated attackers to append additional SQL queries into already-existing queries that can be used to extract sensitive information from the database. |
| Cap-go Console < 12.28.2 contains a denial-of-service vulnerability in its account deletion flow that allows an attacker to block authentication and onboarding functions by triggering account deletion while a device identifier is linked to the active session. The platform incorrectly associates the deletion state with the device identifier, causing the affected device or browser environment to be redirected to an account-disabled page for approximately 30 days, preventing any account login or registration from that device. |
| Hermes WebUI before version 0.51.358 contains an improper access control vulnerability that allows unauthenticated remote attackers to hijack initial setup by submitting the _set_password parameter to the settings API endpoint without any network origin restriction. Attackers on any reachable network can send a POST request to the settings endpoint during the first-run setup window to persist an arbitrary password hash, obtain a valid session cookie, and lock out the legitimate operator from their own instance. |
| Koel is a free, open-source music streaming solution. Prior to version 9.3.5, Koel validates the podcast feed URL via the SafeUrl rule (DNS resolution + public IP check), but the individual episode <enclosure url="..."> values extracted from the RSS XML are stored directly into the database without any SSRF validation. When a user plays an episode, the server downloads the full HTTP response from the unvalidated enclosure URL via Http::sink()->get() and streams it back to the user, enabling full-read SSRF against internal services. This issue has been patched in version 9.3.5. |
| NanaZip is the 7-Zip derivative intended for the modern Windows experience. From version 3.0.1000.0 to before version 6.0.1698.0, a heap out-of-bounds read exists in the Android Verified Boot (AVB) vbmeta image parser in NanaZip (via the upstream 7-Zip AvbHandler). A 32-bit unsigned integer overflow in the bounds check pos + ht.salt_len > descSize allows an attacker-controlled salt_len field to bypass validation, causing CByteBuffer::CopyFrom to memcpy up to ~4 GiB past the end of a 64. This issue has been patched in stable version 6.0.1698.0 and preview version 6.5.1742.0. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, by combining Buffer.call.call({}.__lookupGetter__, Buffer, "__proto__"), Buffer.call.call({}.__lookupSetter__, Buffer, "__proto__"), and Node.js's ERR_INVALID_ARG_TYPE Error, the host's TypeError constructor can be obtained, which allows the escape from the sandbox. This allows attackers to run arbitrary code. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, NodeVM blocks several dangerous Node.js builtins such as module, worker_threads, cluster, vm, repl, and inspector. However, the denylist misses process and inspector/promises. Both can be used from sandboxed code to reach host-side execution primitives. This allows sandboxed code to bypass the intended builtin restrictions and execute code in the host process. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, the fix for GHSA-8hg8-63c5-gwmx (CVE-2023-37903) introduced a check in nodevm.js line 263 that blocks the combination nesting: true + require: false. However, the check uses strict equality (options.require === false), which is trivially bypassed by omitting the require option entirely. When require is not specified, options.require is undefined, not false. The strict equality check fails, so the security guard is skipped. Immediately after (line 280), the destructuring default require: requireOpts = false assigns requireOpts = false, producing the exact configuration the patch was designed to prevent. This issue has been patched in version 3.11.4. |
