| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.0 to before 0.10.78, the *_from_pem_callback APIs did not validate the length returned by the user's callback. A password callback that returns a value larger than the buffer it was given can cause some versions of OpenSSL to over-read this buffer. OpenSSL 3.x is not affected by this. This vulnerability is fixed in 0.10.78. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. |
| In OpenBSD through 7.8, the slaacd and rad daemons have an infinite loop when they receive a crafted ICMPv6 Neighbor Discovery (ND) option (over a local network) with length zero, because of an "nd_opt_len * 8 - 2" expression with no preceding check for whether nd_opt_len is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| NEMU (OpenXiangShan/NEMU) before v2025.12.r2 contains an improper instruction-validation flaw in its RISC-V Vector (RVV) decoder. The decoder does not correctly validate the funct3 field when decoding vsetvli/vsetivli/vsetvl, allowing certain invalid OP-V instruction encodings to be misinterpreted and executed as vset* configuration instructions rather than raising an illegal-instruction exception. This can be exploited by providing crafted RISC-V binaries to cause incorrect trap behavior, architectural state corruption/divergence, and potential denial of service in systems that rely on NEMU for correct execution or sandboxing. |
| @node-oauth/oauth2-server is a module for implementing an OAuth2 server in Node.js. The token exchange path accepts RFC7636-invalid code_verifier values (including one-character strings) for S256 PKCE flows. Because short/weak verifiers are accepted and failed verifier attempts do not consume the authorization code, an attacker who intercepts an authorization code can brute-force code_verifier guesses online until token issuance succeeds. |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An app may be able to access information about a user's contacts. |
| nimiq-block contains block primitives to be used in Nimiq's Rust implementation. `SkipBlockProof::verify` computes its quorum check using `BitSet.len()`, then iterates `BitSet` indices and casts each `usize` index to `u16` (`slot as u16`) for slot lookup. Prior to version 1.3.0, if an attacker can get a `SkipBlockProof` verified where `MultiSignature.signers` contains out-of-range indices spaced by 65536, these indices inflate `len()` but collide onto the same in-range `u16` slot during aggregation. This makes it possible for a malicious validator with far fewer than `2f+1` real signer slots to pass skip block proof verification by multiplying a single BLS signature by the same factor. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.2 can craft a PDF which leads to long runtimes. This requires loading a PDF with a large trailer `/Size` value in incremental mode. This has been fixed in pypdf 6.10.2. As a workaround, one may apply the changes from the patch manually. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.1 can craft a PDF which leads to long runtimes. This requires cross-reference streams with wrong large `/Size` values or object streams with wrong large `/N` values. This has been fixed in pypdf 6.10.1. As a workaround, one may apply the changes from the patch manually. |
| DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Starting in version 1.0.10 and prior to version 3.4.0, `SAFE_FOR_TEMPLATES` strips `{{...}}` expressions from untrusted HTML. This works in string mode but not with `RETURN_DOM` or `RETURN_DOM_FRAGMENT`, allowing XSS via template-evaluating frameworks like Vue 2. Version 3.4.0 patches the issue. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in data query logic. |
| Improper validation of STRING tensor offsets could allows malformed string metadata to trigger out of bounds access during constant tensor import in Samsung Open Source ONE
Affected version is prior to commit 1.30.0. |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Processing a malformed input containing a < character that is not followed by a > character anywhere in the remaining text with a SmartypantsRenderer will lead to Out of Bounds read or a panic. This vulnerability is fixed with commit 759bbc3e32073c3bc4e25969c132fc520eda2778. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-net: fix OOB access in ULE extension header tables
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded. |
