| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix memory leaks on probe failures
Make sure to deregister the controller, disable pins, and kill and free
the RX URB on probe failures to mirror disconnect and avoid memory
leaks and use-after-free.
Also add an explicit URB kill on disconnect for symmetry (even if that
is not strictly required as USB core would have stopped it in the
current setup). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: fix memory leak on damon_start() failure in damon_stat_start()
Destroy the DAMON context and reset the global pointer when damon_start()
fails. Otherwise, the context allocated by damon_stat_build_ctx() is
leaked, and the stale damon_stat_context pointer will be overwritten on
the next enable attempt, making the old allocation permanently
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: do not forget to endio for partial discard requests
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: auth_gss: fix memory leaks in XDR decoding error paths
The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()
functions allocate memory via gssx_dec_buffer(), which calls
kmemdup(). When a subsequent decode operation fails, these
functions return immediately without freeing previously
allocated buffers, causing memory leaks.
The leak in gssx_dec_ctx() is particularly relevant because
the caller (gssp_accept_sec_context_upcall) initializes several
buffer length fields to non-zero values, resulting in memory
allocation:
struct gssx_ctx rctxh = {
.exported_context_token.len = GSSX_max_output_handle_sz,
.mech.len = GSS_OID_MAX_LEN,
.src_name.display_name.len = GSSX_max_princ_sz,
.targ_name.display_name.len = GSSX_max_princ_sz
};
If, for example, gssx_dec_name() succeeds for src_name but
fails for targ_name, the memory allocated for
exported_context_token, mech, and src_name.display_name
remains unreferenced and cannot be reclaimed.
Add error handling with goto-based cleanup to free any
previously allocated buffers before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Fix missing cleanup on get_burstcount() error
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix memory leak in raid1_run()
raid1_run() calls setup_conf() which registers a thread via
md_register_thread(). If raid1_set_limits() fails, the previously
registered thread is not unregistered, resulting in a memory leak
of the md_thread structure and the thread resource itself.
Add md_unregister_thread() to the error path to properly cleanup
the thread, which aligns with the error handling logic of other paths
in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix memory leak in amdxdna_ubuf_map
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies()
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit(). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leaks in ceph_mdsc_build_path()
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unreserve bo if queue update failed
Error handling path should unreserve bo then return failed.
(cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path
nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue
entry from the queue data structures, taking ownership of the entry.
For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN
attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN
present but NFQA_VLAN_TCI missing), the function returns immediately
without freeing the dequeued entry or its sk_buff.
This leaks the nf_queue_entry, its associated sk_buff, and all held
references (net_device refcounts, struct net refcount). Repeated
triggering exhausts kernel memory.
Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict
on the error path, consistent with other error handling in this file. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: i2c: fix skb memory leak in receive path
When 'midev->allow_rx' is false, the newly allocated skb isn't consumed
by netif_rx(), it needs to free the skb directly. |
| A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected. |
