| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure. `dev->iobase`
may still be set to its initial value of 0, which would result in
undesired writes to low I/O port addresses. `dev->private` may still be
`NULL`, which would result in null pointer dereferences.
Fix `atmio16d_detach()` by checking that `dev->private` is valid
(non-null) before calling `reset_atmio16d()`. This implies that
`dev->iobase` was set correctly since that is set up before
`dev->private`. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in add_adev() error path
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: file: Use kzalloc_flex for aio_cmd
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| Giflib contains a double-free vulnerability that is the result of a shallow copy in GifMakeSavedImage and incorrect error handling. The conditions needed to trigger this vulnerability are difficult but may be possible. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
| Use after free in WebRTC in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Uninitialized Use in GPU in Google Chrome on Android prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
| Use After Free in Printing in Google Chrome on Linux, Mac, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in Audio in Google Chrome on Mac prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Inappropriate implementation in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
| Object lifecycle issue in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Skia in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Aura in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in GPU in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
