Export limit exceeded: 350927 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3355 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43031 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets When a TX packet spans multiple buffer descriptors (scatter-gather), axienet_free_tx_chain sums the per-BD actual length from descriptor status into a caller-provided accumulator. That sum is reset on each NAPI poll. If the BDs for a single packet complete across different polls, the earlier bytes are lost and never credited to BQL. This causes BQL to think bytes are permanently in-flight, eventually stalling the TX queue. The SKB pointer is stored only on the last BD of a packet. When that BD completes, use skb->len for the byte count instead of summing per-BD status lengths. This matches netdev_sent_queue(), which debits skb->len, and naturally survives across polls because no partial packet contributes to the accumulator. | ||||
| CVE-2026-43223 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails. | ||||
| CVE-2026-43458 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing. | ||||
| CVE-2026-43264 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup. | ||||
| CVE-2026-27693 | 1 Traccar | 1 Traccar | 2026-05-08 | 5.4 Medium |
| Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0. | ||||
| CVE-2026-43270 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove() In mtk_mdp_probe(), vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak. | ||||
| CVE-2026-40280 | 2 Gotenberg, Thecodingmachine | 2 Gotenberg, Gotenberg | 2026-05-08 | 7.5 High |
| Gotenberg is an API-based document conversion tool. In versions 8.30.1 and earlier, the default private-IP deny-lists for the --webhook-deny-list and --api-download-from-deny-list flags use a case-sensitive regular expression (^https?://) to match URL schemes. Because Go's net/url.Parse() normalizes the scheme to lowercase before establishing the outbound TCP connection, an attacker can bypass the deny-list by simply capitalizing part of the URL scheme (e.g., HTTP://, HTTPS://, or Http://). This allows unauthenticated requests to reach internal network services, including private IP ranges, loopback addresses, and cloud instance metadata endpoints such as HTTP://169.254.169.254/latest/meta-data/. This bypasses the same security control that was patched in CVE-2026-27018. This issue has been fixed in version 8.31.0. | ||||
| CVE-2026-39383 | 2 Gotenberg, Thecodingmachine | 2 Gotenberg, Gotenberg | 2026-05-08 | 7.2 High |
| Gotenberg is an API-based document conversion tool. In version 8.29.1, an unauthenticated attacker with network access can force the server to make outbound HTTP POST requests to arbitrary internal or external destinations by supplying a crafted URL in the Gotenberg-Webhook-Url request header. The FilterDeadline function in filter.go is intended to gate outbound URLs, but when both the allow-list and deny-list are empty (the default configuration), it returns nil unconditionally and permits any URL. This is a blind SSRF: Gotenberg POSTs the converted document to the webhook URL and only checks whether the response status code is an error, but never returns the target's response body to the attacker. An attacker can use this to probe internal network infrastructure by observing whether the error callback is invoked, force POST requests against internal services that perform side effects, and confirm reachability of cloud metadata endpoints. The retryable HTTP client issues up to 4 automatic retries per request, amplifying each probe. This issue has been fixed in version 8.31.0. As a workaround, configure the GOTENBERG_API_WEBHOOK_ALLOW_LIST environment variable to restrict webhook URLs to known receivers, or set GOTENBERG_API_WEBHOOK_DENY_LIST to block RFC-1918 and link-local address ranges. | ||||
| CVE-2026-43355 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails. | ||||
| CVE-2026-31760 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpib: lpvo_usb: fix memory leak on disconnect The driver iterates over the registered USB interfaces during GPIB attach and takes a reference to their USB devices until a match is found. These references are never released which leads to a memory leak when devices are disconnected. Fix the leak by dropping the unnecessary references. | ||||
| CVE-2026-43128 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt). | ||||
| CVE-2026-34084 | 1 Phpoffice | 1 Phpspreadsheet | 2026-05-08 | 9.8 Critical |
| PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.2 and earlier, 2.0.0 through 2.1.14, 2.2.0 through 2.4.3, 3.3.0 through 3.10.3, and 4.0.0 through 5.5.0, when the filename argument to IOFactory::load() is user-controlled, an attacker can supply a PHP stream wrapper path (such as phar://, ftp://, or ssh2.sftp://) that passes the is_file() check in File::assertFile(). The phar:// wrapper triggers deserialization of the PHAR metadata, which can lead to remote code execution if a suitable gadget chain is available in the application. The ftp:// and ssh2.sftp:// wrappers can be used for server-side request forgery. This issue has been fixed in versions 1.30.3, 2.1.15, 2.4.4, 3.10.4, and 5.6.0. | ||||
| CVE-2026-41139 | 2 Josdejong, Mathjs | 2 Mathjs, Mathjs | 2026-05-08 | 8.8 High |
| Math.js is an extensive math library for JavaScript and Node.js. From version 13.1.0 to before version 15.2.0, arbitrary JavaScript can be executed via the expression parser of mathjs. This issue has been patched in version 15.2.0. | ||||
| CVE-2026-41413 | 1 Istio | 1 Istio | 2026-05-08 | 5 Medium |
| Istio is an open platform to connect, manage, and secure microservices. Prior to versions 1.28.6 and 1.29.2, when a RequestAuthentication resource is created with a jwksUri pointing to an internal service, istiod makes an unauthenticated HTTP GET request to that URL without filtering out localhost or link local ips. This can result in sensitive data being distributed to Envoy proxies via xDS configuration. This issue has been patched in versions 1.28.6 and 1.29.2. | ||||
| CVE-2026-28201 | 2 Lfnovo, Open Notebook | 2 Open-notebook, Open Notebook | 2026-05-07 | 7.8 High |
| An improper input validation, together with an overly permissive default CORS configuration in Open Notebook v1.8.1 allows remote attacker to trick a legitimate user to alter or delete arbitrary database entries via specially crafted malicious URL. Depending on the deployment, data exfiltration is also possible. | ||||
| CVE-2025-14341 | 1 Divvydrive | 1 Divvydrive | 2026-05-07 | 8.3 High |
| Improperly controlled modification of Dynamically-Determined object attributes, Allocation of resources without limits or throttling vulnerability in DivvyDrive Information Technologies Inc. DivvyDrive allows Excessive Allocation, Flooding. This issue affects DivvyDrive: from 4.8.2.19 before 4.8.3.2. | ||||
| CVE-2026-41905 | 1 Freescout Helpdesk | 1 Freescout | 2026-05-07 | 7.7 High |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.217, Helper::sanitizeRemoteUrl() in app/Misc/Helper.php follows HTTP redirects via curlGetLastRedirectedUrl() but then re-validates the original URL instead of the final redirect destination. An attacker who can supply any URL that passes the initial host check can redirect FreeScout to internal HTTP services (cloud metadata, internal APIs, RFC1918 ranges) that would normally be blocked. This issue has been patched in version 1.8.217. | ||||
| CVE-2026-26801 | 2 Bpampuch, Pdfmake | 2 Pdfmake, Pdfmake | 2026-05-07 | 7.5 High |
| Server-Side Request Forgery (SSRF) vulnerability in pdfmake versions 0.3.0-beta.2 through 0.3.5 allows a remote attacker to obtain sensitive information via the src/URLResolver.js component. The fix was released in version 0.3.6 which introduces the setUrlAccessPolicy() method allowing server operators to define URL access rules. A warning is now logged when pdfmake is used server-side without a policy configured. | ||||
| CVE-2026-31741 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: prevent counter from being toggled multiple times Runtime PM counter is incremented / decremented each time the sysfs enable file is written to. If user writes 0 to the sysfs enable file multiple times, runtime PM usage count underflows, generating the following message. rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow! At the same time, hardware registers end up being accessed with clocks off in rz_mtu3_terminate_counter() to disable an already disabled channel. If user writes 1 to the sysfs enable file multiple times, runtime PM usage count will be incremented each time, requiring the same number of 0 writes to get it back to 0. If user writes 0 to the sysfs enable file while PWM is in progress, PWM is stopped without counter being the owner of the underlying MTU3 channel. Check against the cached count_is_enabled value and exit if the user is trying to set the same enable value. | ||||
| CVE-2026-31750 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] | ||||