| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: fix out-of-bounds read during lookup
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch. |
| Out-of-bounds Read vulnerability in Mitsubishi Electric GENESIS64 versions 10.97 to 10.97.1, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97 to 10.97.1, Mitsubishi Electric ICONICS Suite versions 10.97 to 10.97.1, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97 to 10.97.1, Mitsubishi Electric GENESIS32 versions 9.7 and prior, Mitsubishi Electric Iconics Digital Solutions GENESIS32 versions 9.7 and prior, and Mitsubishi Electric MC Works64 versions 4.04E and prior allows a remote unauthenticated attacker to disclose information on memory or cause a Denial of Service (DoS) condition by sending specially crafted packets to the GENESIS64, ICONICS Suite, GENESIS32, or MC Works64 server. |
| An information disclosure vulnerability exists in multiple WSO2 products due to improper implementation of the enrich mediator. Authenticated users may be able to view unintended business data from other mediation contexts because the internal state is not properly isolated or cleared between executions.
This vulnerability does not impact user credentials or access tokens but may lead to leakage of sensitive business information handled during message flows. |
| In PHP versions:8.1.* before 8.1.34, 8.2.* before 8.2.30, 8.3.* before 8.3.29, 8.4.* before 8.4.16, 8.5.* before 8.5.1, the getimagesize() function may leak uninitialized heap memory into the APPn segments (e.g., APP1) when reading images in multi-chunk mode (such as via php://filter). This occurs due to a bug in php_read_stream_all_chunks() that overwrites the buffer without advancing the pointer, leaving tail bytes uninitialized. This may lead to information disclosure of sensitive heap data and affect the confidentiality of the target server. |
| A weakness has been identified in QuickJS up to eb2c89087def1829ed99630cb14b549d7a98408c. This affects the function js_array_buffer_slice of the file quickjs.c. This manipulation causes buffer over-read. The attack is restricted to local execution. The exploit has been made available to the public and could be exploited. This product adopts a rolling release strategy to maintain continuous delivery Patch name: c6fe5a98fd3ef3b7064e6e0145dfebfe12449fea. To fix this issue, it is recommended to deploy a patch. |
| Buffer Over-read vulnerability in Mitsubishi Electric MC Works64 versions 4.00A to 4.04E, Mitsubishi Electric GENESIS64 versions 10.97 and prior, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97 and prior, Mitsubishi Electric ICONICS Suite versions 10.97 and prior, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97 and prior, Mitsubishi Electric GENESIS32 versions 9.7 and prior, and Mitsubishi Electric Iconics Digital Solutions GENESIS32 versions 9.7 and prior allows an attacker to cause a DoS condition in the database server by getting a legitimate user to import a configuration file containing specially crafted stored procedures into GENESIS64, ICONICS Suite, MC Works64, or GENESIS32 and execute commands against the database from GENESIS64, ICONICS Suite, MC Works64, or GENESIS32. |
| A vulnerability has been identified in the libarchive library. This flaw can be triggered when file streams are piped into bsdtar, potentially allowing for reading past the end of the file. This out-of-bounds read can lead to unintended consequences, including unpredictable program behavior, memory corruption, or a denial-of-service condition. |
| An out-of-bounds read vulnerability exists in the RLECodec::DecodeByStreams functionality of Grassroot DICOM 3.024. A specially crafted DICOM file can lead to leaking heap data. An attacker can provide a malicious file to trigger this vulnerability. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in Safari 16, iOS 16, iOS 15.7 and iPadOS 15.7. Processing maliciously crafted web content may lead to arbitrary code execution. |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. After PFCP association, a PFCP Session Establishment Request that includes a CreateFAR with an empty or truncated IPv4 address field is not properly validated. During parsing, parseFAR() calls ip2int(), which performs an out-of-bounds read on the IPv4 address buffer and triggers an index-out-of-range panic. An attacker who can send PFCP Session Establishment Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF and disrupt user-plane services. |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. After PFCP association, a specially crafted PFCP Session Establishment Request with a CreatePDR that contains a malformed Flow-Description is not robustly validated. The Flow-Description parser (parseFlowDesc) can read beyond the bounds of the provided buffer, causing a panic and terminating the UPF process. An attacker who can send PFCP Session Establishment Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: aio_iiro_16: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl812: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in devs.path
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string. |
| Buffer Overflow vulenrability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavcodec/jpegxl_parser.c in gen_alias_map. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: Fix OOB read on empty string write
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: das16m1: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: das6402: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| ImageMagick is a software suite to create, edit, compose, or convert bitmap images. In versions 7.1.2-9 and prior, the TIM (PSX TIM) image parser contains a critical integer overflow vulnerability in its ReadTIMImage function (coders/tim.c). The code reads width and height (16-bit values) from the file header and calculates image_size = 2 * width * height without checking for overflow. On 32-bit systems (or where size_t is 32-bit), this calculation can overflow if width and height are large (e.g., 65535), wrapping around to a small value. This results in a small heap allocation via AcquireQuantumMemory and later operations relying on the dimensions can trigger an out of bounds read. This issue is fixed in version 7.1.2-10. |
| An issue was discovered in Foxit PDF and Editor for Windows before 13.2 and 2025 before 2025.2. Opening a malicious PDF containing a crafted JavaScript call to search.query() with a crafted cDIPath parameter (e.g., "/") may cause an out-of-bounds read in internal path-parsing logic, potentially leading to information disclosure or memory corruption. |
