| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Drupal Drupal core allows Object Injection.This issue affects Drupal core: from 8.0.0 before 10.4.9, from 10.5.0 before 10.5.6, from 11.0.0 before 11.1.9, from 11.2.0 before 11.2.8. |
| Azure Monitor Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| The reference count changes made as part of the CVE-2023-33951 and CVE-2023-33952 fixes exposed a use-after-free flaw in the way memory objects were handled when they were being used to store a surface. When running inside a VMware guest with 3D acceleration enabled, a local, unprivileged user could potentially use this flaw to escalate their privileges. |
| A vulnerability in Batik of Apache XML Graphics allows an attacker to run untrusted Java code from an SVG. This issue affects Apache XML Graphics prior to 1.16. It is recommended to update to version 1.16. |
| In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid. |
| The application was vulnerable to an authenticated information disclosure, allowing administrators to view unsalted user passwords, which could lead to the compromise of plaintext passwords via offline attacks. |
| Improper Control of Dynamically-Managed Code Resources in GitHub repository budibase/budibase prior to 1.3.20. |
| Server-Side Request Forgery (SSRF) in GitHub repository transloadit/uppy prior to 3.3.1. |
| Server-Side Request Forgery (SSRF) vulnerability in Ghost allows an attacker to access internal resources.This issue affects Ghost: from 6.0.0 through 6.0.8, from 5.99.0 through 5.130.3. |
| A security vulnerability has been detected in EyouCMS up to 1.7.7. Impacted is the function saveRemote of the file application/function.php. Such manipulation leads to server-side request forgery. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor is "[a]cknowledging the existence of the vulnerability, we have completed the fix and will release a new version, v1.7.8". |
| A vulnerability was identified in PowerJob up to 5.1.2. This vulnerability affects the function checkConnectivity of the file src/main/java/tech/powerjob/common/utils/net/PingPongUtils.java of the component Network Request Handler. The manipulation of the argument targetIp/targetPort leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. |
| A security flaw has been discovered in dayrui XunRuiCMS up to 4.7.1. Affected is an unknown function of the file /admind45f74adbd95.php?c=email&m=add of the component Email Setting Handler. Performing a manipulation results in server-side request forgery. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in dayrui XunRuiCMS up to 4.7.1. This vulnerability affects unknown code of the file admin79f2ec220c7e.php?c=api&m=test_site_domain of the component Project Domain Change Test. This manipulation of the argument v causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Spinnaker is an open source, multi-cloud continuous delivery platform. Versions prior to 2025.1.6, 2025.2.3, and 2025.3.0 are vulnerable to server-side request forgery. The primary impact is allowing users to fetch data from a remote URL. This data can be then injected into spinnaker pipelines via helm or other methods to extract things LIKE idmsv1 authentication data. This also includes calling internal spinnaker API's via a get and similar endpoints. Further, depending upon the artifact in question, auth data may be exposed to arbitrary endpoints (e.g. GitHub auth headers) leading to credentials exposure. To trigger this, a spinnaker installation MUST have two things. The first is an artifact enabled that allows user input. This includes GitHub file artifacts, BitBucket, GitLab, HTTP artifacts and similar artifact providers. JUST enabling the http artifact provider will add a "no-auth" http provider that could be used to extract link local data (e.g. AWS Metadata information). The second is a system that can consume the output of these artifacts. e.g. Rosco helm can use this to fetch values data. K8s account manifests if the API returns JSON can be used to inject that data into the pipeline itself though the pipeline would fail. This vulnerability is fixed in versions 2025.1.6, 2025.2.3, and 2025.3.0. As a workaround, disable HTTP account types that allow user input of a given URL. This is probably not feasible in most cases. Git, Docker and other artifact account types with explicit URL configurations bypass this limitation and should be safe as they limit artifact URL loading. Alternatively, use one of the various vendors which provide OPA policies to restrict pipelines from accessing or saving a pipeline with invalid URLs. |
| SSRF vulnerability in M-Files Server products with versions before 22.1.11017.1, in a preview function allowed making queries from the server with certain document types referencing external entities. |
| Portkey.ai Gateway is a blazing fast AI Gateway with integrated guardrails. Prior to 1.14.0, the gateway determined the destination baseURL by prioritizing the value in the x-portkey-custom-host request header. The proxy route then appends the client-specified path to perform an external fetch. This can be maliciously used by users for SSRF attacks. This vulnerability is fixed in 1.14.0. |
| Rhymix before 2.1.24 is vulnerable to Server-Side Request Forgery (SSRF) in the background import data function because XML documents may contain external entities. |
| CVAT is an opensource interactive video and image annotation tool for computer vision. Versions prior to 2.0.0 were found to be subject to a Server-side request forgery (SSRF) vulnerability. Validation has been added to urls used in the affected code path in version 2.0.0. Users are advised to upgrade. There are no known workarounds for this issue. |
| Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects. |
