| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node
When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during
vmalloc cleanup triggers expensive stack unwinding that acquires RCU read
locks. Processing a large purge_list without rescheduling can cause the
task to hold CPU for extended periods (10+ seconds), leading to RCU stalls
and potential OOM conditions.
The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node()
where iterating through hundreds or thousands of vmap_area entries and
freeing their associated shadow pages causes:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l
...
task:kworker/0:17 state:R running task stack:28840 pid:6229
...
kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299
purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299
Each call to kasan_release_vmalloc() can free many pages, and with
page_owner tracking, each free triggers save_stack() which performs stack
unwinding under RCU read lock. Without yielding, this creates an
unbounded RCU critical section.
Add periodic cond_resched() calls within the loop to allow:
- RCU grace periods to complete
- Other tasks to run
- Scheduler to preempt when needed
The fix uses need_resched() for immediate response under load, with a
batch count of 32 as a guaranteed upper bound to prevent worst-case stalls
even under light load. |
| Improper Input Validation in Zoom Rooms for Windows before 6.6.5 in Kiosk Mode may allow an authenticated user to conduct an escalation of privilege via local access. |
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.7, the Registry's HTTP-based namespace verification (POST /v0/auth/http, POST /v0.1/auth/http) uses safeDialContext (internal/api/handlers/v0/auth/http.go:67-110) to refuse dialling private/internal addresses when fetching the well-known public-key file from a publisher-supplied domain. The blocklist (isBlockedIP, lines 125-133) relies entirely on Go stdlib's IsLoopback / IsPrivate / IsLinkLocalUnicast / IsMulticast / IsUnspecified plus a manual CGNAT range. None of these cover IPv6 6to4 (2002::/16), NAT64 (64:ff9b::/96 and 64:ff9b:1::/48 per RFC 8215), or deprecated site-local (fec0::/10) — all of which encode arbitrary IPv4 in the address bits and tunnel to RFC1918 / cloud-metadata services on dual-stack / NAT64-enabled hosts. This vulnerability is fixed in 1.7.7. |
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.9, OCI ownership validation skips label-match check when upstream OCI registry returns HTTP 429, letting any authenticated publisher bind their io.github.<user>/* namespace to OCI images they do not control. internal/validators/registries/oci.go:104-119 fails open on http.StatusTooManyRequests: when the registry's anonymous fetch to the upstream OCI registry is rate-limited, ValidateOCI returns nil and the publish is accepted without ever running the io.modelcontextprotocol.server.name label-match check at lines 122-141. That label check is the only cross-system ownership proof the registry applies to OCI packages — every other registry type (NPM, PyPI, NuGet, MCPB) treats a non-200 upstream response as a hard error. This vulnerability is fixed in 1.7.9. |
| An issue in edu Business Solutions Print Shop Pro WebDesk v.18.34 (fixed in 19.76) allows a remote attacker to escalate privileges via the AccessID parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer. |
| Elixir WebRTC is an Elixir implementation of the W3C WebRTC API. Prior to 0.15.1 and 0.16.1, missing DTLS peer certificate fingerprint validation in the DTLS client (active) role removes one side of WebRTC's mutual authentication. The bug is not independently exploitable for media interception in standard deployments, but enables a full man-in-the-middle attack when chained with insecure signalling or a peer with similar validation gaps. This vulnerability is fixed in 0.15.1 and 0.16.1. |
| Firmament-Autopilot FMT-Firmware commit de5aec was discovered to contain a buffer overflow via the task_mavobc_entry function at /comm/task_comm.c. |
| The locally served web site on the Garmin WDU (v1 1.4.6 and v2 5.0) allows a symlink attack. If a malicious graphics package containing symlinks is uploaded, the web server follows the supplied links when serving content. No mechanisms to restrict those link targets to a specific area of the filesystem is enabled. This allows an attacker to retrieve arbitrary files from the device. |
| The locally served web site on the Garmin WDU (v1 1.4.6 and v2 5.0) allows a cross-site origin WebSocket hijacking attack. Among other uses, the WDU utilizes WebSockets to control settings, including administrative settings. This allows a network attacker to take full control of a WDU. To initiate an exploit of this vulnerability, the victim must (1) be utilizing a web browser on a multihomed host that has local interfaces on the Garmin Marine Network as well as another network, and (2) access a malicious third party website created by the attacker. |
| The locally served web site on the Garmin WDU (v1 1.4.6 and v2 5.0) allows its authentication to be bypassed. The WDU web site only performs authentication with the client within the client's browser. The WebSockets used to communicate with the WDU server do not enforce any authentication. An attacker may bypass all authentication mechanisms by directly utilizing the remote APIs available on the websocket. |
| Nuxt OG Image generates OG Images with Vue templates in Nuxt. The isBlockedUrl() denylist introduced in nuxt-og-image@6.2.5 to remediate GHSA-pqhr-mp3f-hrpp (Dmitry Prokhorov / Positive Technologies, March 2026) is incomplete. It has an incomplete IPv6 prefix list and is missing redirect re-validation. This vulnerability is fixed in 6.4.9. |
| Note Mark is an open-source note-taking application. From 0.13.0 to before 0.19.4, the Note Mark application allows authenticated users to upload assets to notes via POST /api/notes/{noteID}/assets, where the asset filename is provided through the X-Name HTTP request header. This value is stored directly in the database without any sanitization or validation - no path separator filtering, no directory traversal sequence rejection, and no use of filepath.Base() to strip directory components. The unsanitized name is persisted as-is in the note_assets table (Name column, varchar(80)). When an administrator subsequently runs the data export CLI commands (note-mark migrate export-v1 or note-mark migrate export), the stored asset name is passed directly into filepath.Join() and path.Join() calls as part of the output file path argument to os.Create(). Since Go's filepath.Join() resolves ../ sequences during path normalization, an attacker-controlled asset name containing directory traversal sequences causes the export process to write files to arbitrary locations on the filesystem, completely outside the intended export directory. This vulnerability is fixed in 0.19.4. |
| Crabbox prior to v0.12.0 contains an authentication bypass vulnerability that allows non-admin shared-token callers to impersonate other owners or organizations by spoofing identity headers. Attackers can inject malicious X-Crabbox-Owner and X-Crabbox-Org headers in requests authenticated with a shared token to bypass authorization checks and access owner/org-scoped lease operations belonging to victim accounts. |
| Crabbox prior to v0.12.0 contains a privilege escalation vulnerability that allows users with shared visibility-only access to obtain Code, WebVNC, and Egress agent tickets by sending POST requests to ticket endpoints. Attackers can exploit insufficient access control checks on the /v1/leases/:id/code/ticket, /v1/leases/:id/webvnc/ticket, and /v1/leases/:id/egress/ticket endpoints to obtain bridge-agent tickets and impersonate trusted lease-side bridges despite having only visibility permissions. |
| Crabbox prior to v0.12.0 contains an environment variable exposure vulnerability that allows attackers with access to a malicious or compromised repository to forward local secrets such as API tokens, cloud credentials, and broker tokens into the remote command environment. Attackers can exploit overly permissive environment variable allowlisting in repo-local Crabbox configuration to serialize sensitive environment variables into remote command execution, exposing credentials to the remote environment. |
| Note Mark is an open-source note-taking application. Prior to 0.19.4, no minimum length or entropy is enforced on the JWT_SECRET configuration value. The application accepts any base64-decodable secret regardless of size, including secrets as short as 1 byte. This vulnerability is fixed in 0.19.4. |
| Tuist is a virtual platform team for Swift app devs. In 1.180.8 and earlier, the DELETE /api/projects/{account_handle}/{project_handle}/previews/{preview_id} endpoint loads the preview by its UUID without verifying that the preview belongs to the project resolved from the URL path. The route's project-level authorization plug (AuthorizationPlug, :preview) authorizes the caller against the project encoded in account_handle/project_handle — which the attacker controls — and then the action deletes whichever preview's UUID is supplied. The check therefore guards the wrong project. |
| Tuist is a virtual platform team for Swift app devs. Prior to 1.180.10, the forgot password flow allows an unauthenticated attacker to repeatedly trigger password reset emails for a known account without server-side throttling. In self-hosted deployments, this can be abused to send large volumes of unwanted email and consume downstream email delivery resources. This vulnerability is fixed in 1.180.10. |
| HRConvert2 is a self-hosted, drag-and-drop & nosql file conversion server & share tool. Prior to 3.3.8, the sanitizeString() function in convertCore.php is missing backtick (`) and tab (\t) from its strip list. User input then reaches shell_exec(), where the shell interprets these characters and commands within filenames execute. This vulnerability is fixed in 3.3.8. |
